Kjz laser instrument Popular with DENTISTS Small volume,Light weight,Easy operation,No pain,Fastness therapy,Slight heat damage,Short period of ulcer healing,Stable and reliable performance,Wonderful curative effect KJZ LASERINSTRUMENT FOR ORAL CAVITY, based on oral cavity characteristics, is mainly applied to pure gingivitis, dental caries, periodontitis, pericoronitis, pulpitis, root canal disinfection, flatness lichen in oral cavity and diseases of oral mucosa. KJZ LASERINSTRUMENT FOR ORAL CAVITY emits laser with wavelength of 1064nm, which can moderately run through human body and produce the right heat. By means of this type of laser with small energy the blood capillary in oral cavity can effectively be sealed off. The laser can also resolve and vary the protein of bacteria, playing a role of detumescence, hemostasis and bactericidal action. It can also kill some nerve cells in teeth, playing a role of desensitization. 1. Dentin hypersensitive-ness The sensitive tooth surfacef+s dentinal tubule is open, the Nd:YAG laser instantaneous produces The high thermal effect causing the organic matter denaturation and inorganic substance fusing on the dentin surface, forming a glass type matter, sealing up dentinal tubule after the instantaneous coagulation, thus achieved the treatment goal. Prompt supplement inorganic substance when the dentinal tubule fusing, it can better seal up the dentinal tubule and change dentin ultramicro surface texture, at the moment the laser illumination may strengthen desensitization forward effect, reduces dentinal tubulef+s reopening opportunity because of friction or etching. 2. Periodontitis The laser can evaporate and vaporizate coat by illuminating hard organizationf+s surface to be clean. Not only can reduce the quantity of actinomycete, the gum bacillus, and so on, moreover can remove the inflammation granulation tissue at the bottom of the periodontal pocket. First using the laser illumination, then going on gum scaling, the damage is slightly better to the elimination fang stimulator. The Nd:YAG laser illumination canf+t remove the majority of fungi spot, the tooth stone, therefore cannot substitute the traditional gum scaling and fang-level up. 3. Chronic apical periodontitis The hard organization absorbs Nd:YAG laser easily, this enables it to become the first choice of lasers. Chronic apical periodontitis, specially the root tipf+s repeated infection forms the fistula, the root tipf+s surrounded organization and the dental alveoli bone because of infection suffers the destruction, it makes difficult to the treat, often needs to treat many times with the conventional treatment, Nd:YAG laser can reduce the treatment course with the illumination, also the effect is good. 4. Increase roughness on the surface After the Nd:YAG laser illumination, the tooth surface changes unevenly, roughness changes in a big way, enhanced the contacted area between the tooth and the curing agent, therefore the cementing power improves in a big way, so the cementing is more better. 5. Oral ulcer The Nd:YAG laser has good acesodyne effect to the ROU, it can eliminate patient's pain in the short time. Overcoming the traditional medicine partial treatment with the shortcoming which is interfered with the oral cavity environment, it can rapidly stop pain, accelerate the ulcer to heal, no pain in the treatment course, and it does not damage other mucous membrane organization, easily operated and safe. Quantity: 1 si Piece Package Size: 42.0 *52.0 *100.0 ( cm ) Gross weight/Package: 100.0 ( kg )
Neck traction fixer Introduction of the neck traction fixer: The dx-series of neck traction fixer is a new type neck tractor as a product of health care. This neck traction device elongates and exercises the neck and decreases the pressure between the discs. Frequent usage can promote better blood circulation and stress relief, air neck traction fixer system allows for deep neck muscle relaxation. The neck traction would assist to relief the tension, neck pain, muscles spasms, stress and pressure in the neck area. It is a product that combine the traction, fix, and magnetic cure and health care, especially helpful for the mid age and old age people and computer operators and officers who will feel uncomfortable in neck area after work or after standing, sitting, or walking all day. The net weight of the neck traction fixer is about g. The character of the neck traction fixer: Our product is the class i device, has got exclusive patents (invention patent, new practical patent and shape patent) and is fda certified product. The necktraction fixer has the ability to adjust to different diameters and heights. The diameter scope is from . Cm to . Cm. The heights scope is from cm to cm. The circumference of the necktraction fixer can adjust from cm to cm. The traction power can reach kg. The net weight of the necktraction fixer is g. Inner of the necktraction fixer is made from the rubber latex; the outside of the necktraction fixer is made from the cotton flannel. The linker and pneumatic bulb are made from the rubber latex. The person who always sits before the office table takes in the writing, or operating the computer or other work. And the driver always sits in the whole day. These persons have the pain neck disease or often feel fatigue in the neck area. Our products can help them reduce the pain and cure and prevent neck pain and fatigue, muscles spasms. There are two models as dx-a and dx-c. Dx-a is that the neck traction fixer without the magnets. Dx-c is that the neck traction fixer with the magnets. The differences between dx-a and dx-c: The appearance of the dx-c is same the dx-a. The difference is the magnets. Inside of the second layer there are three magnets, which is made by 1600 gauss magnet. The 3 points lie in respectively fengchi pointfengfu pointfengchi point, which can stimulate the circulation of blood. On the surface of dx-c is the material of far infrared. The net weight of the each neck traction fixer is about 250g. Characteristic of use: A) practical and effective: not only can be used inside and outside the room, but also can be sued in sitting, traveling and lying. Frequent use of the product would effectively aid the prevention and treatment of cervical spondylopathy; alleviate the fatigue in neck area. B) convenient for carrying: a handy design for carry-on easy. C) simple operation: it is portable and adjustable of angle and strength of traction by yourselves. D) safety: this product causes no pain, risk used and any side effect if used in accordance with the instruction given. Beijing daxiang new material and technology co.
Neck traction fixer Introduction of the Neck Traction Fixer: The DX-series of Neck traction Fixer is a new type neck tractor as a product of health care. This Neck Traction device elongates and exercises the neck and decreases the pressure between the discs. Frequent usage can promote better blood circulation and stress relief, Air Neck Traction Fixer system allows for deep neck muscle relaxation. The neck traction would assist to relief the tension, neck pain, muscles spasms, stress and pressure in the neck area. It is a product that combine the traction, fix, and magnetic cure and health care, especially helpful for the mid age and old age people and computer operators and officers who will feel uncomfortable in neck area after work or after standing, sitting, or walking all day. The net weight of the neck traction fixer is about 220g. The character of the Neck Traction Fixer: Our product is the Class I device, has got 3 exclusive patents (Invention Patent, New Practical Patent and Shape Patent) and is FDA certified product. The Necktraction Fixer has the ability to adjust to different diameters and heights. The diameter scope is from 8.9cm to 15.3cm. The heights scope is from 1cm to 24cm. The circumference of the Necktraction Fixer can adjust from 28cm to 48cm. The traction power can reach 80kg. The net weight of the Necktraction Fixer is 250g. Inner of the Necktraction Fixer is made from the rubber latex; the outside of the Necktraction Fixer is made from the cotton flannel. The linker and pneumatic bulb are made from the rubber latex. The person who always sits before the office table takes in the writing, or operating the computer or other work. And the driver always sits in the whole day. These persons have the pain neck disease or often feel fatigue in the neck area. Our products can help them reduce the pain and cure and prevent neck pain and fatigue, muscles spasms. There are two models as DX-A and DX-C. DX-A is that the Neck Traction Fixer without the magnets. DX-C is that the Neck Traction Fixer with the magnets. The differences between DX-A and DX-C: The appearance of the DX-C is same the DX-A. The difference is the magnets. Inside of the second layer there are three magnets, which is made by 1600 gauss magnet. The 3 points lie in respectively Fengchi pointf¼Fengfu pointf¼Fengchi point, which can stimulate the circulation of blood. On the surface of DX-C is the material of far infrared. The net weight of the each neck traction fixer is about 250g. Characteristic of use: A) Practical and Effective: Not only can be used inside and outside the room, but also can be sued in sitting, traveling and lying. Frequent use of the product would effectively aid the prevention and treatment of cervical spondylopathy; alleviate the fatigue in neck area. B) Convenient for carrying: a handy design for carry-on easy. C) Simple operation: it is portable and adjustable of angle and strength of traction by yourselves. D) Safety: this product causes no pain, risk used and any side effect if used in accordance with the instruction given. Beijing Daxiang New Material and Technology Co.
Neck traction fixer Introduction of the neck traction fixer: The dx-series of neck traction fixer is a new type neck tractor as a product of health care. This neck traction device elongates and exercises the neck and decreases the pressure between the discs. Frequent usage can promote better blood circulation and stress relief, air neck traction fixer system allows for deep neck muscle relaxation. The neck traction would assist to relief the tension, neck pain, muscles spasms, stress and pressure in the neck area. It is a product that combine the traction, fix, and magnetic cure and health care, especially helpful for the mid age and old age people and computer operators and officers who will feel uncomfortable in neck area after work or after standing, sitting, or walking all day. The net weight of the neck traction fixer is about 220g. The character of the neck traction fixer: 1)our product is the class i device, has got 3 exclusive patents (invention patent, new practical patent and shape patent) and is fda certified product. 2)the necktraction fixer has the ability to adjust to different diameters and heights. The diameter scope is from 8.9cm to 15.3cm. The heights scope is from 1cm to 24cm. The circumference of the necktraction fixer can adjust from 28cm to 48cm. 3)the traction power can reach 80kg. 4)the net weight of the necktraction fixer is 250g. 5)inner of the necktraction fixer is made from the rubber latex; the outside of the necktraction fixer is made from the cotton flannel. The linker and pneumatic bulb are made from the rubber latex. 6)the person who always sits before the office table takes in the writing, or operating the computer or other work. And the driver always sits in the whole day. These persons have the pain neck disease or often feel fatigue in the neck area. Our products can help them reduce the pain and cure and prevent neck pain and fatigue, muscles spasms. There are two models as dx-a and dx-c. Dx-a is that the neck traction fixer without the magnets. Dx-c is that the neck traction fixer with the magnets. The differences between dx-a and dx-c: The appearance of the dx-c is same the dx-a. The difference is the magnets. Inside of the second layer there are three magnets, which is made by 1600 gauss magnet. The 3 points lie in respectively fengchi pointf¼fengfu pointf¼fengchi point, which can stimulate the circulation of blood. On the surface of dx-c is the material of far infrared. The net weight of the each neck traction fixer is about 250g. Characteristic of use: A) practical and effective: not only can be used inside and outside the room, but also can be sued in sitting, traveling and lying. Frequent use of the product would effectively aid the prevention and treatment of cervical spondylopathy; alleviate the fatigue in neck area. B) convenient for carrying: a handy design for carry-on easy. C) simple operation: it is portable and adjustable of angle and strength of traction by yourselves. D) safety: this product causes no pain, risk used and any side effect if used in accordance with the instruction given.
Dear Sir or Madam: I am a manufacturer of the Neck Traction Fixer in China, now I am looking for the distributor to distribute Air Neck Traction in foreign market. Neck traction Fixer is a new type health care product, which can elongates and exercises the neck, decreases the pressure, assist to relief the tension, neck pain, muscles spasms, stress and pressure in the neck area. Introduction of the Neck Traction Fixer: The DX-series of Neck traction Fixer is a new type neck tractor as a product of health care. This Neck Traction device elongates and exercises the neck and decreases the pressure between the discs. Frequent usage can promote better blood circulation and stress relief, Air Neck Traction Fixer system allows for deep neck muscle relaxation. The neck traction would assist to relief the tension, neck pain, muscles spasms, stress and pressure in the neck area. It is a product that combine the traction, fix, and magnetic cure and health care, especially helpful for the mid age and old age people and computer operators and officers who will feel uncomfortable in neck area after work or after standing, sitting, or walking all day. The net weight of the neck traction fixer is about 220g. The character of the Neck Traction Fixer: 1) Our product is the Class I device, has got 3 exclusive patents (Invention Patent, New Practical Patent and Shape Patent) and is FDA certified product. 2) The Necktraction Fixer has the ability to adjust to different diameters and heights. The diameter scope is from 8.9cm to 15.3cm. The heights scope is from 1cm to 24cm. The circumference of the Necktraction Fixer can adjust from 28cm to 48cm. 3) The traction power can reach 80kg. 4) The net weight of the Necktraction Fixer is 250g. 5) Inner of the Necktraction Fixer is made from the rubber latex; the outside of the Necktraction Fixer is made from the cotton flannel. The linker and pneumatic bulb are made from the rubber latex. 6) The person who always sits before the office table takes in the writing, or operating the computer or other work. And the driver always sits in the whole day. These persons have the pain neck disease or often feel fatigue in the neck area. Our products can help them reduce the pain and cure and prevent neck pain and fatigue, muscles spasms. There are two models as DX-A and DX-C. DX-A is that the Neck Traction Fixer without the magnets. DX-C is that the Neck Traction Fixer with the magnets. The differences between DX-A and DX-C: The appearance of the DX-C is same the DX-A. The difference is the magnets. Inside of the second layer there are three magnets, which is made by 1600 gauss magnet. The 3 points lie in respectively Fengchi pointf¼Fengfu pointf¼Fengchi point, which can stimulate the circulation of blood. On the surface of DX-C is the material of far infrared. The net weight of the each neck traction fixer is about 250g. Characteristic of use: A) Practical and Effective: Not only can be used inside and outside the room, but also can be sued in sitting, traveling and lying. Frequent use of the product would effectively aid the prevention and treatment of cervical spondylopathy; alleviate the fatigue in neck area. B) Convenient for carrying: a handy design for carry-on easy. C) Simple operation: it is portable and adjustable of angle and strength of traction by yourselves. D) Safety: this product causes no pain, risk used and any side effect if used in accordance with the instruction given.
Automatic lift Beside our standard service lifts we also offer semi-automatic or automatic Tote-Box-Systems. The basic system and components are similar to the per-assembled construction of our service lifts. The automatic lift includes vertical bi-painting doors with 24 V motor, to open and close the door automatically, independent of the cabin doors. In the car a driven belt device will draw into and eject from the cabin the tote boxes. In front of each landing is a load- and unload- roller conveyor to carry 2 or 3 boxes and code lines at each box for easy pre-setting. Structure self supporting and free standing steel structure made of cold rolled galvanised profiles, pre-mounted in 2 m - sections with trunking and t-guides Lift machine (made in Germany)on top of the shaft, with hardened twin groove sheave, speed 0,40 m sec. The machine is mounted on steel beams, having a high quality reduction gear, magnetic disc brake and hand wheel, protection class IP 54, power supply 400 V 50 Hz, three phase. Speed 0,8 - 1 m sec or frequency control upon request. Controller High security through transformer and 24 volt system, pluggable and pre-wired. SPS (computer programmable) control system compressed equipment in a lockable controller box. Each project will be prepared to the clients requirements. System Each landing door has its own 24 Volt motor to open and close the door automatically independent of the cabin door. In the car a driven belt device will draw into and eject from the cabin our standard tote boxes. In front of each landing is a load and unload roller conveyor to carry 2 resp. 3 boxes. There are photocells in the lift car to read the destination of the box. Our standard tote box is made of heavy duty polypropylene for smooth running, size 400 x 600 x 300 mm. Each box has a slider to set the festinated floor marking easily. The roller conveyors have PVC-rollers. The frame work is made of folded galvanised steel profiles in "office design". The photocells and switches are well protected in the frames. Operation mode Set the slider at the box for the designated floor and put the box on the upper roller conveyor. This conveyor has an automatic device to keep the first box away from the landing door and also to keep the second box away from the first. The computer will notify that there is a box waiting and will send the car to pick it up. The door opens automatically after arrival and the belt will draw the box into the car. Photocells read the destination. Door closes automatically and car delivers the box to the floor indicated on the slider. After opening the landing door, the belt ejects the box to the unloading conveyor. Complete automatic operation will be carried out without human assistance or recall. Options Capacity of 100 or 200 kg, Car and doors in stainless steel, Speed 0,8 m - 1,o - 3 m/sec, Travel up to 150 m
YQ2 It is united with cholesterol in small intestine and prevents the absorption of fat. YQ2 has the similar structural feature compared to cholesterol and it is united with cholesterol in small intestine disturbing the absorption of cholesterol. 2. It discharges fat from the body after the combination with mixed micelle compound which is united with bile. It discharges fat through large intestine after generate insoluble compound by the strong combination with mixed micelle. So it prevents the absorption of cholesterol to small intestine and the oxidation of cholesterol in large intestine. 3. It lowers cholesterol in the body by the combination with bile acid. The main ingredient of bile acid is generated by cholesterol of the body. YQ2 is united with bile acid and cholesterol is lowered 4. It prevents the oxidation of bile acid and controls the multiplication of harmful bacterium So, it improves the function of intestines. Generally, the bile acid becomes the second bile acid by bacteria large intestine. And, it can cause large intestine cancer. It prevents that the bile acid becomes the second bile acid by combination with bile acid. the peculiar surface-active effect of YQ2 improves the function of intestines so that it preventing the increase of harmful bacteria in the intestines by Anti-protozoan, Anti-gram- positive bacillus, and antibiotics activities. 5. YQ2 causes the increase of fat excrement by preventing the absorption of fat. YQ2 can be applied to the various application fields, such as; refreshing beverage, dairy goods, Ice cream, processed meat, etc because of its perfect water solubility. It has the unique flavor and taste. In case of a small quantity, it can enhance the taste with relieved by masking with sweetener, sourness The combination with the low calorie sweetener, such as; aspartame, sucralose, stevioside can improve the flavor and the taste The abundant bubble adds up the refreshing feel in the case of a carbonated drink. Its own stable and fine bubble induces gathering the carbonic acid gas. It can make very stable dairy goods because of its assimilation peculiarity and emulsifying power. Especially, it is very good to chocolate milk, coffee milk. If YQ2 is added to the dairy goods, it generates Cholesterol-YQ2 complex which is not absorbed to the body. YQ2 prevents the absorption of existing cholesterol and the part neutral fat. Thatf+s why it takes effect to the geriatric disease or prevention of obesity. It is stable to heat and wide pH. Its effective element wont be destroyed easily. It is very stable from pH2 to PH10 and more than 80f+. 1. Description : It is the new natural compound lowering cholesterol made by extracting and highly refining the effective elements from the various kinds of plants such as the native cactus, etc in Latin America. 2. Main Ingredients : Quillaja Extract, Yucca schidigera Extract, Green Tea Extract, Grape Leave Extract, Dextrin, etc. 3. Appearance : Yellow Brown Color Liquid 4. Use : Soft Drink(Carbonated or Non-Carbonated), Dairy Products, Healthy foods, Meat-processed foods 5. Quantity for Use : Over 0.27g / day 6. Packaging : 1kg, 5kg, 10kg 7. Shelf Life / Storage : 1 year when stored in dry and dark place under 10C The product opened already should be stored in cool place under5+ 8. Efficacy & Effect Lowering Cholesterol, Improving Digestion, Constipation, Hangover, etc
About Rotary Furnace The Rotary Melting Furnace is a very flexible and universal equipment used for recycling many non-ferrous metals. It is the major lead production technology used in India and many other countries for Secondary Lead Production. A lead production system based on this technology has certain distinct characteristics such as: Equipment scalable for installing higher capacities Recovers all lead in one production cycle Plates & powder from scrap battery as well as slag from Mini Blast Furnace can be used as raw material Requires addition of certain consumables Can be fired with various fuels Generates high Pollution both as Flue Gases & Fugitive Emissions Description of Rotary Furnace It is a Rotary kiln in the form of a metallic cylinder with conical sides on both ends. Mild steel plate is used for construction of this shell and its thickness varies depending upon the capacity of the equipment. This shell is rotated on its own axis at 1-2 rpm. For this purposes tyres (also called riding rings) are fitted on the shell. These are fabricated from MS squares or flats, machined for a smooth finish. These tyres ride on steel rollers which are again machined finely. These rollers are fitted on a robust MS structural frame and driven by a gear & motor arrangement. The shell is lined inside with insulation and fire bricks of suitable Alumina content. Conical ends of the furnace are open on both sides. The furnace is charged with Raw material along with additives from the front end. This side is provided with a movable door on which a burner is mounted. The burner can be a conventional one or a fully automatic one depending upon the fuel used. At the other end, an exhaust block lined with refractory bricks is provided. A tapping hole is provided in the center of the shell from where molten metal & slag are discharged. Flue gases generated are sucked from the exhaust block side of the furnace. A typical 3.0 TpB Rotary Furnace has the following standard sizes & specifications : Outside dimensions of the Rotary Shell dia : 2075mm Shell length : 2500mm Total length : 4500mm Charging dia : 450mm Exhaust side dia : 450mm Refractory thickness : 200mm Fuel : Furnace Oil Burner : Model 4 A FD Fan capacity : 1250 cmh at 1000mm of WG Gear Box in drive : 8, 1:40 Ratio Motor in drive : 15.0 HP x 960 RPM Structure used for base : ISMC 250 x 80 Manufacturing Process Lead to be manufactured from Rotary Furnace can be obtained directly from scrapped batteries or as slag from Mini Blast Furnace. In case of former, batteries are cut open or broken to segregate lead scrap, plastic and other materials from them; lead scrap in the form of lead powder/ plates etc. is charged in the furnace along with a proportionate charge of additives. In the case of latter, slag produced from Mini Blast Furnaces is charged into the Rotary Furnace, again with proportionate additives. This process is a batch type process. After filling the required quantity of raw material (either manually or mechanically), the lid of the furnace at the front is closed. The burner attached to the moving door is then fired. Complete mass of lead raw. Material along with additive chemicals is heated at high temperature inside the furnace. After some time, molten lead is collected at the bottom of the furnace by puncturing the central opening of the Rotary Furnace. Lead is collected either directly into Jumbo Ingot Moulds or in receiving channels from which they are poured into Jumbo Ingot Moulds. After draining the Furnace of the first batch, production of next batch is undertaken and the Furnace is again charged with raw material. After three such batches, one batch of slag collected in Rotary Furnace is executed. This process leads to generation of flue gases which are toxic in nature and need appropriate and adequate Air Pollution Control System for their treatment. The steps of Charging and Tapping of Rotary Furnace also lead to generation of Fugitive Emissions which need to be captured at source and treated to maintain ambient air standards at workplace. Process Details of a typical 3.0 TpB Rotary Furnace Raw Material Charged3000 kgs/ Batch Total additive chemicals charged:400-500 kgs/ Batch Rotational speed1-2 RPM Fuel usedFurnace Oil Calorific value of fuel used8600 kCal/ kg. Fuel consumed30-40 lt/ hr. Air provided for process1250 cmh Lead produced9000-10000 kg/day (for Raw Material feed of 12-15 T raw material being lead powder and plates) Flue gas generation15000 cmh Section View of Rotary Furnace Advantages and Disadvantages of Rotary Furnace Advantages Recovers 100% lead in the first operation. Slag produced is lead free. Equipment can be scaled up for higher production capacities. Disadvantages Many chemicals are required for operation. High power consumption. Difficult to produce low Antimony lead suitable for soft lead purposes. Fugitive Emissions need to be captured in addition to flue gases. Need skilled operators and careful maintenance. Air Pollution Control Device for Rotary Furnace Apart from plates and paste of lead oxide from scrap batteries, slag from Mini Blast Furnace is charged in the Rotary Furnace. In addition to these, certain compounds of sulphur are also present in the batteries. When this material is heated in the presence of carbon, lead oxide is converted to lead. This conversion along with burning of fuel generates flue gases and fumes containing dust, dirt, oxides of lead, lead particles and such other impurities etc. Hence, to meet various goals of maintaining employees' health and factory environments as well as regulatory requirements, it becomes imperative to get high end Air Pollution Control Systems to be installed with the Rotary Furnaces. Characteristics of Air Pollution generated in Rotary Furnace Selection of Technology for Air Pollution Control System Based on the parameters and the standards mentioned, the following technology is adopted for Air Pollution Control System in Rotary Furnace: Rotary Chamber Gravity Chamber Involute Cyclone Pulse Jet based Bag House Filtration System Details of Equipments allow with Functions Rotary Chamber Rotary Chamber receives very hot gases from Rotary Furnace while cold gases from atmosphere are induced into chamber via specially designed profile. Thus chamber works as an equalizing chamber to reduce the temperature of gases and also where sedimentation of dust particulate matter takes place. Duct & Bends Ducts and Bends are required to convey flue gases from point of suction to final top of the chimney and connect various equipments like gravity chamber, cyclone, bag house, ID Fan and chimney. All bends and reducers are aerodynamically designed and have provision of manhole cleaning mechanism. Gravity Chamber It is a low pressure drop device which: Allows large size particles to settle down Cools down temperature of flue gases Used as spark arrestor to entrap live or red hot particles. Involute Cyclone Cyclone is used to remove medium size particles from flue gases stream. The treated flue gases are discharged from top and dust is collected at bottom. Bag Filtration System It is used for final filtration of flue gases to remove fine dust particulate matter using Pulse Jet Technology. Treated gases from all the bags are collected at top of bag house and passed through ID Fan to exhaust the same through chimney. The dust is collected at bottom of hopper and is discharged through Rotary Air Lock Valve. ID Fan ID Fan provides necessary driving force to convey flue gases from top of furnace to top of the chimney. The volume sucked overcome the total resistance offered by equipment and duct with the help of fluid horse power provided by ID Fan driven by suitable motor. Stack (Chimney) The generated gases are passed into atmosphere after treatment through chimney of suitable height and diameter. At the time of Delivery
The ZYD Series Transformer Oil Purification/ Regeneration machine is mainly used to improve the properties of insulation oil. It can remove trace dust, water, gas, particulate matters etc. From the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, mutual inductors, cable and capacitors which have insulation system. ZYD Series specialize in purifying transformer oil, insulating oil of high voltage and super high voltage transformer. Additionally, it is also suitable for treating low viscosity lubrication oil. Edges of ZYD Series To remove free, soluble water, carbon, free and dissolved gases and particulate matters, dust from insulating oil, transformer oil, dielectric oil, cable oil effectively and rapidly. With Vacuum pump and Roots pump. Enhance the value of breakdown voltage greatly. Easy handling and maintenance. Inject oil into the transformers. Lower maintenance and replacement expenses. Automatic reverse-washing system will extend the lifetime of filters and improve the performance of the filters. High performance security system including pressure protection device and automatic temperature controller makes purifier operate safely. Utilizes coacervation technology, coalescing technology, separating technology and refined purification technology. To remove free, soluble water, carbon, free and dissolved gases and particulate matters from insulating oil effectively and rapidly. Structure Dehydration (Degas) System 1, The vacuum chamber has flash tower, which can evaporate the water efficiently. Also it has the spraying nozzle with degassing elements design. The heater, being placed on the vacuum vessel, becomes an evaporator. Thus the flash tower of vacuum vessel is three times more than that of the general vacuum vessel. This innovation can dehydrate and degas effectively and efficiently. 2, The optimal structure of the dehydration (degas) system enlarges the surface area of oil exposed to the vacuum system and extends the flowing distance of the oil in the vacuum system. Thus there has sufficient time to remove the moisture and gas from the oil by vaporization. ¡ô Filtering System (particulate matter removal) 1, The filtering materials with variable apertures are made of specialized glass fiber or stainless steel optionally. The sizes of the filtering fiber and aperture dwindle gradually in the different filtering stages. The impurities with different particulate sizes are filtered step by step. The capability of removing particulate matters and impurities is improved greatly by this method. 2, The filtering system has stable and prefect filtering fineness. The filtering fineness has several grades, including 0.5, 1, 2, 3, 5, 6, 10 Micron etc. Oil ¦Â>=1000 after filter. 3, The filtering system is equipped with reverse rinse and filth device. It improves the effectiveness of filtering and extends the lifetime of filter awfully. Oil heating System 1, The unique heater structure heats the oil uniformly. 2, Oil Heater System assures less then 1.0 w/cm2. During the heating process, the deterioration of the oil caused by overheating is avoided. 3, The oil temperature can be adjusted between 20C to 80C. The heater is controlled manually or automatically. The heater will stop automatically when the oil temperature reaches a certain degree. 4, Being installed with safety protection devices, the heating system is secure and reliable. The heater will stop operation automatically when the oil volume of inlet is too low to avoid the damages of the heater. Electrical Apparatus Controlling System 1, The main components of the electrical apparatus made by Schneider, Siemens and so on ensure the safety of the controlling system. 2, Having several protection systems which will avoid oil ejection, overload and over voltage etc. Oil-level Controlling System 1, The oil-level floating ball or infrared liquid level automatic controller system are installed in the vacuum vessel to control the oil level so as to avoid the oil being suctioned into vacuum pump in the operation. 2, The new innovation of eliminating froth can avoid the oil being suctioned into vacuum pump. High quality components The main components parts of Tongrui products such as vacuum pump, Roots pump, oil pump and electric apparatus are from SIEMENS, LEYBOLD, OMRON, SCHNEIDER, HYDAC, TOP, AMICO etc. It ensures oil filtration systems products high quality and reliability. Vacuum Pump Rotary Vane Vacuum Pumps, is a basic equipment used for pumping air from sealed vessels to attain vacuum condition. The vacuum pumps may be applied singly, or as the backing pump of the other kinds of pumps, such as booster pump, diffusion pump, molecular pump and titanium pump etc. it may be used for vacuum film-plationg, vacuum heat treatment, vacuum ca-sting and also air-extraction of electric tubes, bulbs and thermos flaks. The pump may also be equipped in medical institutions and laboratory. Capacity:3740L/Min Ultimate pressure:less than 6*10-2Pa Rotary speed of pump:450 R/Min Motor Power: 3Kw Cooling mode: water cooling, >1L/min Roots Pump Roots pumps can be used as boosters combined with backing pump. Of a rotary vane vacuum pump,or a liquid ring vacuum pump. But they can not be used to exhaust No Water-cooking silent running due to specially selected gears Overflow valve which permits the pump to be swiched on at atmospheric pressure and gives shorter evacuation times Standardized ISO connections Smooth running due to dynamically balanced rotor Low operating costs with high pumping speed in the medium-high vacuun range No friction of moving parts in the compression chamber due to even gaps between rotors and housing walls. Capacity:1250m3/h Ultimate pressure: 5*10-2Pa Rotary speed of pump: 2890r/min Motor Power: 4Kw Cooling mode: water cooling, >2L/min Instrumentation options Foam Level Detector When there is foam in the tank and foam reaches a certain level (resetable), a signal will be sent to the magnetic valve, the magnetic valve will automatically shut on. The foam will be removed quickly. After removing foam, the magnetic valve will shut off. Unit Type: set Package Weight: 40.0kg (88.185lb.) Package Size: 60cm x 25cm x 65cm (23.62in x 9.84in x 25.59in)
Packing:plastic bag or as customers& requirement. Usage:mining coal metallagical industry architectural industry cheical industry electricity,transportation industry,ports,etc. Characteristics: Polyester conveyor belts also called EP conveyor belts, whose tension resistant body is canvas woven by polyester in warp and polyamine in weft. The belts have the characteristics of low elongation in warp and good trough ability in weft, good water resistance, good wet strength, no mould is suitable for medium, long distance and heavy-load transportation of materials. Because of the high initial modulus of polyester, the belts can choose a relative low safety factor General purpose fabric conveyor belt 1. Good elasticity, anti-impact; 2. High adhesion, good flexibility and trough ability; 3. Better stability of size and heat-resistance 4. Good water-proof ability, little change in strength under dry or wet conditions Entire core flame resistant conveyor belt The product is made of cotton canvas, nylon canvas of EP canvas and through the processes of calendaring ,assembling , vulcanizing and etc. it is suitable for conveying various non- corrosive and thornless materials in blocks, in grains ,or in powder such as coal in buld or in bales. under the condition of flammable or explosive environment in the calmine . Undulating flange conveyor belt 1. The obliquality can reach 90C 2. Heavy load, slip resistant 3. Obliquity can be changed while conveying Elevator conveyor belt 1,Confined space, 2,little pollution, 3,great conveying capacity 4,suitable for conveying bulk material. thermostable conveyor belt 1) Collection of canvas by the multilayer to agglutinate in together. 2) Duplicate has thermostable covered rubber, but comes after the curing 3) Widely used in metallurgy. 4) Used for building materials and chemical production assembly lines, mainly used in the transportation of massive materials, granular and powdery products. 5) High temperature solid material, as agglomerate, coke, and cement. Acid -alkali resistant conveyor belt Because for belt core selects cotton canvas, nylon canvas or polyester canvas, so it has good elasticity, excellent trough ability and low elongation. The rubber cover which is made of chemical resistant materials has good resistance to chemical corrosion and good physical properties Made of chemical resistant materials 2) Fine anti-chemical corrosiveness 3) Good strength 4) Good elasticity 5) Excellent trough ability Oil resistant conveyor belt Oil resistant conveyor belt carries parts and components coated with machine oil, heavy-oil treated coal in cooking plants and electric power generating plants, soybean draff, fish meat and other oily materials. Materials containing non-polar organic solvents and fuel. Oil resistant conveyor belt compounded of oil resistant synthetic rubber with good resistance to the damaging effects encountered when conveying oil contaminated or treated materials. Overlay glue is NBR which has good oil resistance According to consumer¡¡£¤s ordering we choose strengthen material. Food conveyor belt Cover layer adopts combination of rubber and plastic filled with excellent acid resistant and alkali resistant inert material which takes more advantages compared with neoprene acid and alkali resistant belt. Frame material adopt EP canvas which makes the performance be more reliable than belt with cotton canvas core. It is made ringlike generally. Steel cored conveyor belt Purposes: Extensive applications in coal, mining, port, metallurgy, power, chemical sectors for long-distance, large amount and high-speed conveying of materials. Structure: The longitudinally uniformly arranged and left-girth twisted zinc plated steel cable and plastic core form the cord which is covered with rubber to form the belt. 1. High tensile strength:Steel cord conveyor belt is suitable for large span,long distance transportation of materials 2. Small elongation in use:It need only a very short take-up stroke distance. 3. Small diameter of drive pulley:Steel cord conveyor belt body has a layer of longitudinally arranged steel cords as its skeleton,and thus is resistant to flex fatigue.Therefore,drive pulley of smaller diameter can be used to make the equipment smaller. 4.High adhesion between rubber and steel cord:The steel cords are coated with zinc on their surface,and also the rubber used has the property of qood adhesion with steel cords.Therefore,the rubber is tighrly adhered to the steel cords and is resistant to shock and difficult to drop,so the rubber belts are long in life. NN conveyor belt Also called plain conveyor belt,which tension resistant body is canvas woven by polyester in warp and polyamine in weft.The belts have the characteristics of low elongation in warp and good trough ability in weft, good water resistance, good wet strength, no mould is suitable for medium, long distance and heavy-load transportation of materials. Because of the high initial modulus of polyester, the belts can choose a relative low safety factor.We can produce according to DIN22102 standard and As1332-2000 standard and RMA and any international standard. About us Sanye now boasts 90-odd employees, 1 million yuan of registered capital, and more than 90 million yuan of annual production value. As the testing and R&D center of Baoding¡¡£¤s rubber industry, Sanye boasts a perfect quality assurance system. With independent chemical analysis labs and physical labs, Sanye can keep all raw materials, processed products and end-products under control. With professional quality control personnel, sophisticated detection equipment, advanced and efficient detection means, Sanye guarantees qualified products. Sanye has established long-term stable business relationships with major projects or enterprises including Yangtze River Three Gorges Project, Foshan Shiwan Yingpai Ceramics Co., Ltd., Guangdong Monalisa Ceramics Co., Ltd., Fuxin Lichang Iron & Steel Co., Ltd.etc. We supply good quality best service fast delivery,Your any enquery is appreciated.
Valves, chemicals, pesticides, fertilizer.Man power, import and export, management courses, all raw material
Ac Bright, Alu Bright, Mr. Bright, Ac Condenser Coil Cleaning .
Quartz, Handmade Sink, Ac Capacitors, Copper And Aluminum Pancake For Ac, And Other.
AC rolling door motor, AC & DC rolling door opener.
About Mini Blast Furnace A Mini Blast Furnace (commonly known as Mandir Bhatti or Shahi Bhatti) is a simple, time-tested and widely used system to produce secondary lead in India and many other countries. It is the most basic of all furnaces and a production system based on this technology has certain distinct characteristics such as: Low Project Capital Cost Low Energy Cost ( wooden coke fired) Easy to install Easy to operate & maintain Production of low Antimony Lead (soft lead) at low temperature Generates high pollution Description of Mini Blast Furnace The Furnace itself is a modified blast furnace which consists of a brick lined structure with fire brick oven in the midst and a metal Exo skeletal structure outside. Raw material & fuel (coke) is charged manually through the side metal doors fitted in the brick structure and air is provided from the FD fans provided at the back of the brick structure. Molten metal & slag is tapped at the pits made in front of the brick structure and flue gases are sucked from the top of the brick structure which is provided with a metallic hood. A typical Double Oven Mini Blast Furnace has the following standard sizes & specifications: Outside Dimensions of Brick Structure 2400mm L x 1900mm W x 2400mm H No. of Ovens 2 Nos. Oven Size Top Dia 600mm Bottom Dia 250mm Depth 650mm No. of FD Fans 2 Nos. (1 for each oven) FD Fan Capacity 300cmh at 250mm of WG No. of Charging Doors 2 Nos. (1 for each oven) Charging Door Dimensions 1100mm H x 650mm W Manufacturing Process Lead to be manufactured from Mini Blast Furnace is usually obtained from scrapped batteries. They are cut open or broken to segregate lead scrap, plastic and other materials from it. Lead scrap in the form of lead powder and plates etc. is charged in the furnace along with a proportionate charge of wooden coke. Thereafter the furnace is manually fired with the help of rags. FD Fan provides the necessary air required for combustion from the back of the furnace. Coke in the oven performs the functions of both, the fuel as well as a reducing agent for obtaining lead from its oxides charged in the form of lead plates & powder. Temperature of the furnace is maintained at the desired level for approximately 30 minutes, after which molten lead along with slag flows out from the bottom of the oven into the outlet pit. Here slag is separated and molten lead is poured into Ingot Moulds. To maintain this, continuous charge of raw material and coke is maintained in the furnace. This process leads to generation of flue gases which are toxic in nature and need appropriate and adequate Air Pollution Control System for their treatment. Process Details for a typical Double Mini Blast Furnace Raw Material Charged 700-800 kg hr. Fuel used Wooden Coke Calorific Value of Fuel used 4000-5000 kCal kg Fuel Consumed 70-75 kg hr. Air provided for process 300 cmh Lead Produced (1st Charge) 300-350 kg hr. Flue Gas generation 8000-9000 cmh Advantages and Disadvantages of Mini Blast Furnace Advantages No consumables used other than Wooden Coke which is also used as Fuel Low Power Consumption Produces low Antimony Lead suitable for soft lead purposes Pollution can be controlled with minimum fugitive emissions Easy to install, operate & maintain Disadvantages Cannot recover 100% lead in the first operation Subsequent recovery of lead after first recovery consumes higher coke & manpower. Equipment cannot be scaled up for higher production capacities. Various types of lead present in used batteries, plates and paste of lead oxide are charged in the furnace. In addition to these, certain compounds of sulphur are also present in the batteries. When this material is heated in the presence of carbon, lead oxide is converted to lead. This conversion along with burning of fuel generates flue gases and fumes containing dust, dirt, oxides of lead, lead particles and other impurities etc. Hence, to meet various goals of maintaining employees' health, for factory environments as well as regulatory requirements, it becomes imperative to get high end Air Pollution Control Systems to be installed with the Mini Blast Furnaces. At the time of Delivery
1. DSHQ48 High Resolution Seismograph is produced on the basis of DSHQ24 seismograph and combined with China national situation to work under a new type Chinese WINXP system. The design and manufacturing into the valuable experience of seismic instruments, also absorbs today's advanced electronic technologies and design concepts, it is a leading seismograph multi-function, high accuracy, high speed, high reliability, good man-machine interface features and scalability. 2. The Instrument can be used a hammer, electric spark or explosion as the excitation source, with exploration depth from a few meters to a thousand meters; also delay function can be used to obtain Department of stratum deeper underground seismic data. 3. Applicable Methods are: Reflection, refraction, surface wave exploration, pile testing, microtremor measurement, high-density seismic imaging, vibration testing, measurement and shear-wave seismic exploration methods, widely used in water conservancy, electric power, railways, bridges, urban construction, transportation and other areas of engineering geological exploration, also applies to oil, coal, uranium mining and groundwater exploration and other fields. Main Applications • Reflection and Refraction Exploration: Bedrock embedded depth, shape and regularities of distribution research, hydrological and engineering and environmental geological basic investigation. Shear Wave Velocity Test: Measurement of rock mass elasticity parameters, etc. • Surface Wave Prospecting: Cover layer investigation; weathering zone investigation; underground cavity and diseased geologic body survey; subgrade, levee, slope disease investigation. • High-density Multi-wave Seismic Imaging: Cavity investigation of ground base and subgrade (roadbed), cave surveying, etc. • Quality Inspection of Civil Engineering; Bridge pier and building pile foundation detecting, etc. • Safety Evaluation of City Blasting Vibration: All kinds of safety monitoring of blasting vibration. • Main FeaturesAdopt the latest high-speed, high-precision real 24-bit A/D converter. Maximum sampling interval for 48 channels in simultaneous sampling is 31.25us, reaching international advanced level. • Maximum sampling interval for single channel is up to 10us. Can easily complete seismic data acquisition, and data processing • Not only use the advanced wave filter with ultra-low distortion performance, better than 120 dB, with external suppression (cut-off frequency automatically changes with sampling frequency); meanwhile, various digital wave filters (high, low, band pass wave filters) are set in the software, with their cut-off frequency being set artificially. • Brand-new overall structure design, which allows more reasonable view to facilitate the operation. • Support coverage measurement; • Provided with overlaying switch and overlaying cable manufactured by our factory, the application in various reflection, refraction, reflex measurement for field exploration can be facilitated, thus greatly improving the efficiency of field work. • DSHQ48 high-resolution seismograph can support 12-channel and 24-channel overlaying measurement without external configuration Built-in unique instrument detection system. Self-checking acquisition, data computing, self-checking report can automatically generated the output. Field make-and-break test for geophone and jug lines, full waveform noise monitoring Support multiple (at Windows interface) processing software: Superficial reflex processing, refraction, surface wave shear wave package, blasting, pulsating, high-density seismic imaging processing software Clock: Annual timing clock, file recording time will be stored in along with parameters. Main Technical Specifications Computer Configuration: Military Grade PC104 Control Computer P4 (933MHz); Memory: 256MB; Hard Disk: no smaller than 80GB Operating System: win-XP Display: 1024x768 dot matrix, high brightness TFT (true color) LED. Input Device: Equipped with suitable field-use membrane keyboard and touch screen; can also be connected with PS / 2 computer keyboard and mouse; provided with handwriting tablet. Interface: Dual USB interface, PS/2 keyboard, mouse interface, parallel port, Ethernet port, etc. Removable Storage: USB disk, or adopting mobile hard disk drive, USB mobile drive, etc. Frequency Response Range: 0.1Hz~4kHz Noise: smaller than 1 V at full-frequency state Sampling Time Delay: 0~9999ms Conformity: amplitude conformity better than ¡À0.02%; phase conformity: better than ¡À0.01ms Sampling Rate: 10¦Ìs/31.25¦Ìs/62.5¦Ìs/125¦Ìs/250¦Ìs/500¦Ìs/1 ms/2 ms/4 ms/8 ms/16ms/32ms-400ms several taps Number of Sampling Points: 512, 1024, 2048, 4096, 8192, 16384, etc., maximum record up to 32768; Preamplifier Gain: Every six channels as a group, optionally chosen by software: 64 times (36dB), 16 times (24dB), 4 times (12dB), 1times; A/D Converter: Adopt the latest, ultra high speed ¦²-¦¤24 bit A/D converter; Alias Filter: Automatic tracking along with the sampling rate; -3dB, down to 120dB at the place with 0.216 times of sampling rate; and provided with various digital wave filters, cutoff frequency (at the place with -3dB) if required Supported Data Format: SEG-2, SEG-Y, CSP Trigger Mode: Internal and external triggered by hammer switch; triggered via blasting, and electric spark; also triggered by wire-breaking or connecting
Featured Functions: 1.Plug&play, no need for DDNS,no need for port mapping and no need for static IP. 2. Support iPhone, Android, Symbian, and Java Mobile Viewing 3. Support Snapshot and Snapshot Management 4. Function to set the rights of local users and network users 5. Parameters of each channel can be set separately 6. Support Audio talk between host-end and client-end 7. Support software update (USB Device, FTP and Jovision Website) 8. Showing MAC address 9. Windows classic features, user-friendly and easy for operation 10. Lightening-proof function 11.OSD location and content changeable 12. Support 3G module Previewing: 1. Support PAL 2. Previewing Resolution: D1 3. Adjust video parameters of every channel individually 4. Support up to 4 privacy Areas in each channel 5. Support 1/4/16 channels previewing Compression: 1. Use H.264 compression standard and adjustable compression quality 2. Compression/Playback Resolution: CIF 3. Support Audio and Video compression simultaneously Network: 1. Use CloudSEE technology, easy operation, high connection rate and good transmission effect 2. Use Client-end, IE and mobile phone for remote-viewing 3. Support remote-viewing, remote-recording, download remote-recording files, remote-management and remote PTZ control 4. Automatically get network parameters, support PPPoE and remote connection statistics 5. Support Web Service Recording: 1. Support manual recording, schedule recording, motion detection recording and alarm recording 2. Adjustable packaging time of recording files 3. Support remote-recording 4. Support audio recording Playback: 1. Search recording file according to channel, time and recording type 2. Single channel or 4 channels playback 3. Multi-level fast or slow playing, Pause and Single Frame Play, 4 channels synchronous operation 4. Show the status of playback 5. Support remote playback 6. Support audio playback PTZ control: 1. Support exchanging PTZ control orders, Convenient for engineering works 2. Support pre-setting locations and software cruise of high dome camera 3. Support several main PTZ protocol 4. Operate the inter menu of camera Backup: 1. Backup recording files into USB Device 2. Backup system log into USB Device Alarm: 1. Support Motion Detection Alarm, up to 4 areas in each channel. 2. Support video losing alarm. 3. Adjustable alarm duration. Jovision Mobile Phone Viewing Software - Android version Jovision Mobile Phone Viewing Software - iPhone version Jovision Mobile Phone Viewing Software - Java version Jovision CloudSEE Client-end and IE ActiveX Model No. JVS-D7216 O/S Embedded Linux Interface GUI Video Standard PAL/NTSC Video query Time,Channel,Type Backup Type Network Backup, USB Backup Video Input 16 channel BNC Audio Input 2 channel RCA Video Output 1 channel BNC and 1 channel VGA Audio Output 1 channel BNC Previewing Resolution D1 Playback Resolution CIF Layout 1, 4 or 16 screens Local Playback 1 to 4 screens Store recording file Local HDD, Remote network Alarm External alarm device input and output PTZ Control RS485 port HDD Port 2 SATA ports, Up to 2 TB per one Network Port RJ45 USB Port 2 USB2.0 Recording Type Manual, Scheduled, Alarm trigger, Motion Detection trigger Operations USB Mouse/IR control/Front panel Power DC 12V/3.5A Dimension 375mm*270mm*50mm
Product Description: The automatic pick and place machine TP400V-II is a cost-effective equipment in the SMT industry. It is able to fabricate a variety of components by the integrated vacuum nozzle. The machine can mount SMD chip components above 0402, SOICs, PLCCs, QFP and ICs. The Vision System is compatable with QFP ICs with a pitch of 0.5mm. Beside the round reference, also square square formed and ring hole pads can be recognized as mark point. Features: 1. Automatic Mount by control of software. 2. Quick PROTEL data import or manual input. 3. Visual + machinery positioning. 4. Visual programming system can identify the reference point automatically to improve the production efficiency and accuracy. 5. The visual programming system can produce X, Y coordinates of all components automatically after confirmed the basic reference points and to complete the mounting process. 6. Unique optical prism and high-definition industrial cameras for placing high-precision components. 7. Equipped with a high-precision quadrate guide rail and smooth gliding arm for improving mounting accuracy. 8. Air suspended head for pick- and place-process. 9. Automatic nozzle replacement system. Optional: 1. Automatic feeder 2. IC disc 3. Automatic PCB transmission system Main parts: 1. DC servo motor driving system: It uses loop DC servo motor driving system for a high precision repeating accuracy and stability. 2. Vision centering system: Vision centering system can mount 0.5mm pitch QFP ICs. 3. No-contact flying centering system: Flying centering system can mount most of SMD components including: 0402, SOICs，PLCCs & QFP ICs. 4. Flexible reference point system (RPS): In addition to the standard round reference point, also a square formed and ring formed PCB pad with a whole can be identified as a reference point. 5. All-purpose automatic feeder: The TP400V-II has 8mm, 12mm, 16mm, 24mm feeders which you can choose to install. 6. Flexible tray-type station: The TP400V can equip 2 trays which helps to mount bulk components under the semi-auto mode. 7. CAD/ Protel data transfer: Besides studying the component coordinate by Camera or keyboard input, you can choose the CAD transfer software WCAD to transfer the PCB’s CAD into pick and place data. 8. Buffering nozzle: Buffering nozzle can adjust the pressure automatically according to different components height to avoid damage due to different component heights or programming errors. It is suitable for various types of pick and place ceramic components and ceramic circuit boards. Technical Parameter: Type: TP400V-II (V: industrial camera at bottom) Max printing size: 400×350mm Max moving range: 400×630mm Z axis max moving range: 70mm Typical mounting speed: 2000-2800cph Max mounting speed: 3500cph Mounting accuracy: ±0.05mm Component available: SMD components > 0402 and SOICs、PLCCs、QFP ICs < 38mm Positioning method: Visual positioning Programming method: Video study/ keyboards input/ data import Driving way: Y-axis uses industrial synchronous belt drive, X-axis uses imported high precision lead screw. Automatic Feeder: 8mm, 12mm, 16mm, 24mm feeder Feeder Number: 1. Place 72 pieces of 8MM feeder CFTA-08S, 36 pieces at the front and back side. 2. Place 60 pieces of 8MM feeder GFTA-08S, 30 pieces at the front and back side. PCB board input system: Automatic (Standard configuration) Automatic Nozzle changing system: Automatic (Standard configuration) IC tray number: 2 Operation system: WINDOWS XP Compressed air: 80psi (0.5Mpa) Power supply: 220V, 50Hz, 3kw Weight: 310kg Dimension: 1280×1410×750mm
Brief Introduction of Wire Mesh Cable Tray Systems: These are thicker and therefore stronger than apparently similar products. Cablofil incorporates a unique T welded safety edge resulting in performance comparable with traditional cable tray but with many added benefits. Features and Benefits of Wire Mesh Cable Trays: 1. Electroplated Zinc Finish 2. Fast Easy Installation 3. Mesh Design Allows Cable Exit or Entry at any point 4. Clear Cable Identification 5. Supplied in 3 Metre Lengths 6. Significant Cost Savings Compared to Standard Tray Products 7. Simple Creation of Fittings on Site 8. Wide Range of Sizes 9. Heights Shown are Internal Dimensions Manufacturing: Optional Material for wire mesh cable tray: Black Steel, Stainless Steel, Aluminium, Alloy, Fibreglass Reinforced Plastic (FRP) Mode: Top curved / Top Straight Surface Finish: Zinc-plating, Hot-dip Galvanizing (HDG), Powder-coated, Pickled & Passivated. Color: Optional Suggestions: 1). MATERIAL The choice of materials is a matter of the physical and mechanical properties produced by each, compared against the intended function, as well as the environment, in which the trays are to be installed. 2). SURFACE FINISH: A). Zinc-plating cable trays are suitable for indoor use. The place where cold zinc-plating cable trays would work should be dry, ventilated, and corrosion free. B). Hot-dip Galvanizing (HDG) cable trays are not suggested for wire mesh cable trays. C). Powder-coated cable trays should be carried out in alkali and salt corrosion free site. D). Pickled & Passivated should be used to stainless steel wire trays. Specification for power and communications cabling containment. 1). SCOPE Steel Wire Cable Tray conforming to the material and performance of this specification. 2). GENERAL A). Cable tray shall be manufactured from steel wires, welded together and bent into final shape prior to surface treatment. B). Surface Treatments: i). Electro zinc plated to BSEN 12329-2000 for interior use (level 2) ii). Hot Dipped Galvanised with between 60 and 80 microns of zinc to BS 729. iii). Stainless Steel AFNOREZ CND 17.2 (AISI 316L) C). Steel Wire Cable Tray Widths & Depths i). Cable Tray dimensions are all internal. ii). Depths of 30mm, 54mm, 80mm, 105mm & 150mm iii). Widths of 50mm, 100mm, 150mm, 200mm, 300mm, 400mm 450mm, 500mm & 600mm for depths of 30mm & 54mm. iv). Widths of 100mm, 150mm, 200mm, 300mm 400mm & 500mm for Depths of 105mm & 150mm All trays are of 3005mm long 3). SPECIFICATION a). Steel Wire Cable Tray will be produced from lateral and longitudinal sidewall steel wires, with minimum diameters of -: 4 mm for trays of widths up to 150mm 4.5 mm for trays of widths of 200mm 5.0 mm for trays of widths of 300mm 6.0 mm for trays of widths of 400mm, 450mm, 500mm and 600mm b). Trays will be manufactured with a longitudinal 'T-welded' safety edge along the top wire of the sidewall (excluding CF3050) c). Trays will be constructed with a 50mm x 100mm mesh configuration. d). All tray fittings (e.g. changes in direction, level and size) shall be constructed on site, to the manufacturers instructions, using side action bolt croppers and fastened using 25mm and 30mm counter clamps with M6 bolts and nuts, all surface treated as the tray. e). Trays will be coupled together using either a fast spring coupler or a 25mm/30mm counter clamp combination with supporting lateral splice plate on trays over 300mm width. The coupling will have the same surface finish as the tray. f). Trays shall be supported at a maximum span of 2.5m by trapeze, wall, floor or channel mounting methods and will not exceed maximum loads as specified by the manufacturer. g). All welds will be manufactured to an average minimum tensile strength of 500Kg per weld. 4. TESTS, CERTIFICATION AND CONFORMITY a). Loading and deflection characteristics of the tray should be tested and the results published in accordance with the European Standard CEI/61537. b). Suitability for the support of Cat6 data cabling should be demonstrated by way of independent test verification. c). Fire test certification should be published in accordance with the E30/E90 standard. d). Electrical continuity across a coupling should be demonstrated by means of a published test method and result. We are able to design styles in various specifications according to the drawings and/or samples by the clients. And we offer fair price, excellent quality, quick delivery, continuous improvement. We own customer satisfaction. You can trust on us that we are the leading manufacturer of cable trays. PSC
Canneed PEBT-3000 PET Bottle Pressure Tester (Burst Tester) is an advance testing equipment specialized for testing the PET bottles. It has been designed in conformity to the three (3) international commonly used testing methods, users can select the testing mode according to their requirement. PEBT-3000 is able to test the pressure capabilities that under a preset pressure or the burst test. By the means of water replenishing pressurization, the pressurizing process was linearized, and to increase until reaching the preset point or burst point. Users can select the testing mode through the touch-screen. Fill the sample, close the protection door, then press start. When the testing starts, the PEBT-3000 will clamp the sample and run accord with the settings automatically. The touch-screen will display the real-time pressure value and record down the max. pressure (passing test) and burst pressure (destructive test). Attributes: * PEBT-3000 PET Bottle Pressure Tester (Burst Tester)¡¨ is the standard equipment for PET bottle industry. * Three (3) international commonly used testing methods * CND-PEBT Professional software * Preset testing mode and user-defined mode * Display the curve of pressure and volume expansion during the test * Monitor and record the water temperature during the test * Applicable for different size of plastic bottles * Touch-screen contolled * RS232C data output * With calibration function, convenience for calibrating Three (3) international commonly used testing methods Fill Ramp mode: The fill ramp mode was designed to simulate the situation of PET bottle filling lines. In this mode, PET bottles will be pressurized rapidly to the preset initial pressure and hold for 13 seconds. Then continue to pressurize with a speed of 10 pound/inch2 (0.69kg/cm2) until the bottle burst or reaches the max. pressure or volume. Preset parameters include: preset initial pressure, max. pressure and volume expansion limit. Burst mode: In this mode, PET bottles will be pressurized rapidly to the preset pressure value and hold for a period as preset. Preset parameters include: burst pressure, testing time and volume expansion limit. User-defined mode: The User-defined mode of PEBT-3000 is able to create the unique pressurizing curve to meet the special testing requirements. Users can set the pressurizing curve by stages, after the setting is done, the corresponding curve will display on the user interface. PEBT-3000 is the standard equipment for PET bottle industry, it can help to improve the PET bottle performance PEBT-3000 is a standard equipment for testing the PET bottle performance. The PET bottle volume expansion is related to many key PET bottle performance factors, those factors including creep, gas permeation, burst, stress cracks, rigidity, bottom roll-out, topload (axial load), and thermal stability. The Advanced CND-PEBT professional software: Use the CND-PEBT professional software to build up the communication of PEBT-3000 and computer, the software can save and manage the testing data, display the real-time curve of pressure and volume expansion, monitor and record the water temperature during the testing process. User-friendly Operating Interface PEBT-3000 adopted the touch-screen for all the controlling operation and testing data displaying. Features of User Interface: --simple and convenient operating --Touch-screen controlled --Graph displaying of the testing curve --Comprehensive report data after tests. Technical data: Operating Pressure Range: 0-300 Psi (0-20.7 bars) Accuracy: 3 Psi (0.2 bar) Pressure Units of Measure: Psi, kg/cm2, bars, MPa (user defined) Volume Expansion units of Measure: Milliliters Pressure Source: Recommended to use Nitrogen gas (not supplied) Water Source: 0.1 - 0.3 MPa tap water Operating Temperature: 0-50J Power Supply: 110-120 or 220/240VAC @ 50/60 Hz Expansion Capability: 2 L Bottle Sizes Supported: Up to 3L (depending on expansion percentage) Output Interface: Standard serial link Dimensions: 830,580,1600 mm (W , D , H) Weight: 120KG.
