SPECIFICATIONS: the following Percentage Points: Chemical Composition Carbon - 0.54 to 0.82% Phosphorus - 0.035% max Manganese - 0.60 to 1.05% As. - 0,01max of Mass share Silicone - 0.18 to 0.40% Sulphur - 0.035% max Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75 The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m) Used Rails shall be considered free of alloys when the residual alloying elements do not exceed Cut to 1.5 meter length (standard) 1. Technical terms: USED RAIL R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.
Place of Origin:Hebei, China Brand Name:huicong Model Number:Metal stamping Material:Stainless Steel Application:Auto stretch parts, auto parts Service:Customized OEM Size:custom Package:Carton Surface treatment:Zinc Plating Type:OEM Parts Color:black
Scrap Metal and Scrap Metal Buttons Current Scrap: Wastage Brass --- 6000kg Wastage Aluminium--500kg Wastage Brass button--646kg SS Shank Button-346kg Wastage Zinc-1200kg Loading: Seller Transportation: Buyer Payment Terms: 100% deposit to our bank account before purchase. Bid: Within one day of publishing Request for bidding. Material Check: Can visit our factory and check. Same material every month. Location: Hemayetpur, Savar, Dhaka.
Metallic Honeycomb Catalyst is suitable for automobile exhaust purification catalytic converters , industrial waste gas purification and other fields. It can meet the increasing requirements of environmental protection .We also supply Catalytic Converter, Catalytic muffler, Motorcycle catalytic converter, DPF,DOC Catalyst, SCR catalyst ,TWC catalyst,Ceramic honeycomb monolith , Metal honeycomb carrier, ect. Our management system has been certified the ISO9001 and TS16949 by SGS company.  We offer the most diverse metallic substrate configurations in the world.All shapes can be made with or without mantels. Sizing for rounds, ovals and rectangles up to 48" - 1200mm OD Custom cell configurations available  SubstrateConfigurationsShapes can be made with or without mantels/tube Custom shapes that may not be shown here are also available upon request Custom foil geometries available Extensive product offering with variable cell sizes and flow depth options  SubstrateConstructionBrazed, Oxidized & Mechanically Retained Single brazed rounds as large as 48"OD (1200mm) Rectangles up to 48" (1200mm)  Standard Metallic Substrate Nomenclature Metal Substrates without mantels Metal Substrates with mantels Matrix OD x Matrix length x CPSIMatrix OD(Mantel OD)x Matrix length(Mantel Length) Example: 6.5 inch x 3.5 inch x 300CPSI Example:6.38 inch (6.5 inch ) x 3.5 inch (4.0 inch) x 300CPSI Cell densities - CPSI Stock foil widths Rounds in Mantels (air flow depth) Available tube sizes smaller 6� OD 25 260 Inches mm Inches mm 50 300 1 25 1 25 70 350 1.7 43 1.25 32 80 400 2 51 1.5 38 100 500 2.25 57 1.75 44 150 600 2.5 64 2 51 200 900 2.75 70 2.25 57 230 1000 3 76 2.5 64 Custom sizes also available upon request 3.25 83 2.75 70 3.5 89 3 76 4 102 3.25 83 4.72 120 3.5 89 5 127 4 102 5.91 150 5 127 12 305 6 152 Any OD larger than 6� is available
Star products: mainly produces products that forms a complete set for products as oil filter, plumbing, fire fighting etc., including various series hydraulic filter casting housings, oil and gas separator housings, marine copper valves, meter boxes, marine navigation bridge frames, as well as other aluminum alloy & copper castings ect., which is characterized with high pressure resistance, anti-corrosion and anti-wear, therefore has acquired world wide good reputation with excellent quality.
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur.
Electroplating sponge filter Metal filter Material: Sponge plating Thickness: 10 mm Surface: electroplating Size: 54 mm Weight: 4 g Process: Laser cutting Purpose: Die-casting filtering, filtering aluminum water Service: OEM ODM Non Standard Customized Processing Wire Cutting: Max Length: 700 mm Max Diameter: 400 mm Max Thickness: 100 mm Tolerance: 0.02 mm Laser Cutting: Carbon Steel: 0.5 mm - 16 mm Stainless Steel: 1 mm - 8 mm Aluminum Alloy: 1 mm - 8 mm Brass: 1 mm - 4 mm Max Size: 4000 mm * 2000 mm Positioning: ±0.03 mm Repeated: ±0.02 mm Maximum Speed: 169 m/min Materials: Carbon Steel Plate /Galvanized Sheet / Aluminum Alloy Plate / Stainless Steel Plate / Copper Moulds: Stamping Die / Punching Mould / Bending Mold / Deep Drawing Mould / Blanking Mold / Die Cutting Processing: Laser Cutting / Stamping / Punching /Sheet Bending / Metal Forming / Metal Welding / Riveting Category: Cable Hooks / Metal Enclosure / Shims / Spring Pieces / Hinges / Embedded Parts / Gaskets / Clips Applications: Machinery / Equipment / Building / Electronic / Automobile / Medical Device / Handicrafts / Home / Decorative
Non-ferrous metals products. Metal powders. Rare earth metals. Al Farid Wood and Metal Trading Company specialize in non-ferrous metal products and rare earth metals is able to satisfy the broadest needs of the Clients. We offer a wide range of products from the following metals and alloys: Niobium, Rhenium, Nickel, Wolfram, Tin, Nichrome, Vanadium, Aluminum, Brass, Copper, Titanium, Molybdenum, Tantalum, Magnesium, Zirconium The product line consists of the most necessary details: sheet, bar, wire, mesh, profile, pipe, foil, plate. We offer various sizes, thickness, length and type of alloy, and we have a large selection of metal powders with different properties and parameters. Our special offer is high-purity rare earth metals: Tellurium, Gallium, Germanium, Selenium, Indium, Dysprosium, Erbium, Lutetium, Thulium, Gadolinium, Terbium, Neodymium, Europium, Ytterbium, Yttrium, Lanthanum, Rubidium, Samarium, Scandium. More info www.tradingwm.ae
Used Rails R50 - R65 Available. Origin : Saudi Arabia. Performance Bond : 2% Payment Terms : LC AT SIGHT Destination : ASWP CIF Monthly capacity : Any quantity. MQO : 100,000 Mt x 12 Months. Price : 100,000*12 = $240 Nett 200,000*12=$235 Nett 300,000*12=$230 Nett 400,000*12=$225 Nett 500,000*12=$220 Nett
Used Rails R50 - R65 Available. Origin : Saudi Arabia. Performance Bond : 2% Payment Terms : DLC - MT 700 payable at buyer's destination port. Destination : ASWP CIF Monthly Capacity : 5,00,000 Mt MQO : 100,000 Mt x 12 Months. Price : 100,000*12 = $225 Nett 200,000*12=$220 Nett 300,000*12=$220Nett 400,000*12=$215 Nett 500,000*12=$210 Nett *Negoiatable No overpricing We can arrange other Origins also such as Poland, South Africa, Kenya, Philippines, Thailand, etc. For all origins, Docs required LOI with bank details or ICPO BCL or Draft LC or Verbiage or equivalent docs to check clients financial ability. Pymt terms : LC/ DLC/ SBLC payable at buyer's destination port.
Name: sheet metal fabrication laser metal parts Place of Origin: Qing Dao, China Brand: WY TECHNICAL Model Number: Custom Made material: brass, stainless steel, aluminum size: according to customers' demand surface treatment: polish, zinc coating Mold Type: single-stage, compound mold, progressive mold Application: Electronic Parts Certificate: ISO9001:2008 Process: metal stamping Type: OEM stamping Parts
Star products: mainly produces products that forms a complete set for products as oil filter, plumbing, fire fighting etc., including various series hydraulic filter casting housings, oil and gas separator housings, marine copper valves, meter boxes, marine navigation bridge frames, as well as other aluminum alloy & copper castings ect., which is characterized with high pressure resistance, anti-corrosion and anti-wear, therefore has acquired world wide good reputation with excellent quality.
Sintered metal filters are a type of porous filter made by sintering metal powder particles together. Sintering is a process that involves heating metal powder to a temperature just below its melting point, allowing the particles to fuse together and form a solid structure. The resulting filter material is highly porous with a controlled pore size distribution that can filter out particles of a specific size. The pore size of sintered metal filters can range from a few microns to several hundred microns, depending on the required filtration level. The pore size is controlled during the manufacturing process to ensure consistent and precise filtration. Sintered metal filters provide high filtration efficiency due to their precise pore size distribution. They can filter out particles and contaminants of a specific size, making them suitable for a wide range of applications where filtration accuracy is critical. Additionally, sintered metal filters are easy to clean and can be reused multiple times, making them a cost-effective solution in many applications. Products Features Highly porous structure: Sintered metal filters have a highly porous structure that allows for efficient filtration of liquids and gases. The porosity is controlled during the manufacturing process to ensure consistent and precise filtration. Precise pore size distribution: Sintered metal filters offer a precise pore size distribution, which allows for accurate filtration of particles and contaminants of a specific size. This makes them suitable for a wide range of applications where filtration accuracy is critical. High strength and durability: Sintered metal filters are made from metal powders that are sintered at high temperatures, resulting in a strong and durable filter material. They can withstand high temperatures, corrosive environments, and high-pressure applications. Chemical resistance: Sintered metal filters are available in various metals, each with different chemical properties. This allows for customization of the filter material to suit specific chemical environments and applications. Easy to clean and maintain: Sintered metal filters can be easily cleaned and reused multiple times, making them a cost-effective filtration solution. They can be cleaned by backwashing, ultrasonic cleaning, or chemical cleaning, depending on the application requirements. Products Applications Sintered metal filters are used in a wide range of industries and applications, including oil and gas, chemical processing, pharmaceuticals, food and beverage, and water treatment. They are often used to filter out impurities, contaminants, and solids from liquids and gases. The filters can be made from various metals, including stainless steel, bronze, nickel, and titanium, depending on the specific application requirements.
Description Metal stamping of thick or heavy gauge material is not a problem for DongJie Industries. We have presses with higher tonnage capabilities to ensure accuracy, and we offer competitive pricing on all of our metal stamping services. Stamping is an economical way to form metal components with a variety of characteristics including strength, durability, and wear resistance. Stamped parts will also have good conductive properties and stability. At DongJie Stamping, we offer high quality, precision metal stamping for parts and components in many industries. We believe that our levels of engineering, metal stamped part production and overall performance is an art form. Through the decades wee taken advantage of promising technology and applied it uniquely to our advanced systems of getting things done right the first time. DongJie Stamping w orks with a complete range of materials to satisfy even the most demanding specifications. We service a wide range of industries with a complete array of materials from stainless to plastics. Our equipment is capable of handling a wide variety of thicknesses and finishes. We offer complete tractability and documentation when needed. Our ISO 9001:2008 certification gives our customers peace of mind that they are getting the best materials possible for their project. From selecting the best material to tooling for your metal stamping project, we know how to listen and how to hook up our engineering muscle with our customers� needs. We�ve learned how to provide a level of satisfaction that breeds dependability, confidence and value that makes our customers feel powerful. We have the expertise to ensure that your part will be manufactured to your exact specifications and to the highest quality standards. That's power satisfaction. And we manufacture that into every metal stamped part we make. Price Price Condition : FOBPrice : USD5 / piece Packaging & Delivery Delivery Lead Time : 15 daysMinimum Order : 10 pieces
Supply Cadmium Ingot 99.995%, Pure Cadmium Metal Ingot with Top Quality Cadmium ingot 1. Purity: 99.99% ,99.995% 2. Form: Ingot 3. Packaging Details: 1000 kgs pack in one wooden crate. We could also pack according to our customer's special requests 4. Supply Ability: 800 Metric Ton/Metric Tons per Month cadmium Ingot Application: Cadmium is mainly used in electroplating of steel, iron, copper, brass and other metals. It has strong corrosion resistance to alkaline substances. Cadmium can be used to make batteries with small size and large capacity. Cadmium compounds are also widely used in the production of pigments and phosphors. Cadmium sulfide, cadmium selenide and cadmium telluride are used to make photovoltaic cells. Physical specifications: Cadmium ingots by single cent two kinds, a kind of for 5 kg ~ 8 kg small ingot, a big ingot is 350 kg + 50 kg. Small ingot for rectangular trapezoidal shape, thickness difference in size is not more than 5 mm on both ends. Appearance quality" Appearance of cadmium ingot product is silvery white, the surface should be clean, must not have slag and other attached objects or trace pollutants, can not have melt hole, crack obviously, there is no flash, burr (allows dressing), but the natural oxide film is allowed.
Cadmium Physical property :atomic number is 48,atomic weight is112.411.Density is 8.65g/cm3,melting point is 321.18C,boiling point is 765 C.Silver white and slightly bluish luster metal. Chemical property : Cadmium will oxidated slowly in the humid air that will lose the metallic luster,cadmium and halogen react violently in the high temperature.It can be directly combined with sulfur, but not with hydrogen and nitrogen compounds when heating. Specification Cd-5N(99.999%) Cd-6N(99.9999%) Cd-7N(99.999â?¤1ppm Total impurity content â?¤10ppm â?¤1ppm â?¤0.1ppm Application Used for preparation II- VI elements chemical compound semiconductor, high purity alloy, battery solder and control rod of atomic reactor. Used as the material of solar cell etc.
Ir Bal. Pt 0.002 Pd 0.001 Rh 0.003 Ru 0.001 Au 0.001 Ag 0.001 Fe 0.001 Cu 0.002 Application: 1. Iridium is the only precious metal thermocouple that can measure temperature up to 2100 C in the atmosphere because of its high temperature oxidation resistance and thermoelectric properties. Iridium can be used as a container material for radioactive heat source. Iridium anodic oxide film is a promising electrochromic material. Ir192 is a gamma ray source, which can be used for nondestructive testing and radiochemical therapy. Iridium is also an important alloying element; 2. Iridium powder/Iridium gold melting into gold can increase the weight, hardness and density of gold, generally adding about 5%~30%(K gold) of gold weight for mixed melting; 3. It is used for electronic pastes, reduce the sintering temperature of the electronic pastes; 4. It is used for welding of alloy, reduce the alloy melting point; 5. It's for in the alloy, improve the abrasion resistance of alloy; 6. It's for lubricants, improve the wear resistance of lubricating oil; 7. In the application of coatings, improve transparency and abrasion resistance, resistance to scratch and conductive ability;
Metals
Product: Zorba 97% Metallic with 2% Red Metals Qty: 225 metric tons (10 Containers) Terms: FAS Load port: Savannah, Georgia Inspection: CCIC Inspection & Buyer Inspection Available Price: Buyer's bid Payment: ACH/TT upon weight tickets/commercial docs