'The AS LED Luminaire is GreenStarâ second-generation utility-grade Luminaire. Designed to perform in both demanding Roadway and Area Lighting projects. It is ideal for both retrofit and new construction and has a sleek, modern, architecturally pleasing design. An area arm is available for parking lots, auto dealerships, and other area lighting designs where aesthetics are important. This innovative design produces light output equivalent to a 200W'500W HID and provides energy savings of 65% or greater.
LED twin spot (Surface mounted) 2 x 0.5W LED.
Body: die casting aluminum Reflector in pure aluminum Heat-resistant silicon rubber seal ring.
Body: Cast aluminum Lens: Uv resistant opal polycarbonate Hardware: Stainless steel Finish: Polyester powder coating, colours on request Lamps: E27;18-26w cfl
Technical description: luminaire consists from body, basic plate and flange With protective glass. Body and flange are castings from grey cast iron treated With polyester powder paint. Steel pendant with eye o 18 mm is fixed to the Upper part. Connecting area (increased safety „d“), with connecting clamps And 2 cable glands, is placed on the side of luminaire. Flange cable glands No. 3-99.5747/1 from grey cast iron are designed for cable o 10 - 16 mm (gland No. 3-99.6170/1 for cable o 16 - 20 mm). Area is enclosed with cover from Grey cast iron. Steel basic plate with electric parts and reflector is fixed in the Body. Flange with glass cover is screwed in the body and secured with locking Screw and silicon sealing against unlocking; thread shapes a rift of flameproof Enclosure „d“. Protective hardened glass is resistant against mech. Shock min. 7 j and is fixed in the flange, the connection is filled with a polyurethan putty. A steel hinge is fixed to the flange as the mobile one and enables to hang Up the flange during mounting or dismounting. Steel parts are galvanized And chromated. Luminaire is equipped with protective guard from galvanized Steel wire. Max. Section of connecting conductors 4 mm2. Three-pole connecting Terminal block enables interchanging 2 phases (4-core cable). Luminaire Is equipped with 2 inner and 1 outer earthing clamps for conductive connection. Luminaire is designed as the through-way one, when used as end piece, there is Necessary to use blinding plug (optionally on order). Packing carton is filled with Polyurethane foam instapak. Luminous sources: Hwl160 w e27, dulux d26 w g24d-3, bulb100w/220 e27, nav-e 110 w e27, hql125 w e27, nav-e 50/l 50 w e27, hql 80 w e27, clas 200 w e27, master pl e 23 w e27 and next Carton (mm/pcs) 430x240x240, weight 18 kg/pcs
I m2 ex d i, ii 2gd ex d td a iib t3-t4t tmax. Surf. Ip 65 ex. Technical description: luminaire consists from body, basic plate and Flange with protective glass. Body and flange are castings from grey cast Iron treated with polyester powder paint. Luminaire can be suspended By the steel pendant with 2 eyes o 18 mm on the upper part of the Body. Connecting area (increased safety „d“), with connecting clamps and 2 cable glands, is placed on the side of luminaire. Flange cable glands No. 3-99.5747/1 from grey cast iron are designed for cable o 10 - 16 Mm (no. 3-99.6170/1 for o 16 – 20 mm optionally). Area is enclosed With cover from grey cast iron. Steel basic plate with electric parts And reflector is fixed in the body. Flange with glass cover is screwed In the body and secured with locking screw and silicon sealing Against unlocking, thread shapes a rift of flameproof enclosure „d“. Protective hardened glass resistant against mech. Shock min. 7 j is Fixed to the flange, the connection is filled with polyurethane putty. A steel hinge is fixed to the flange as the mobile one and enables to Hang the flange during mounting or dismounting. Steel parts are Galvanized and chromated. Luminaire is equipped with protective guard from steel wire. Max. Section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases. Luminaire is equipped with 2 inner and 1 outer earthing clamps for conducting connection. Luminaire is designed as the through-way one for 4-core cable; when used as the end piece, there is necessary to use blinding plug (optionally on order). Packing carton is filled with polyurethane foam instapak. Luminous sources: Spc 300 and 500w, with ballast box hql 250w, 400w, nav-e 210, 350w Carton (mm/pcs) 560x300x30mm, weight 24 kg/pc
Ii 2g ex de iic t6 gb Ii 2d ex t iiic t 60 °c db Luminaire consists of body, basic plate and Flange with protective glass. Body and flange are made of alsi alloy Treated with polyester powder paint. Luminaire can be suspended By the help of steel pendant with eye o 18 mm. The connecting area (increased safety „e“) is placed on the side of the body and equipped With connecting clamps and 2 cable glands hsk-k-ex m25x1.5 for cables O 9-16 mm. Area is enclosed with cover and sealed with silicon. There is Aluminium basic plate with electro-module mounted inside the Luminaire. Electro-module consists of 20 x led cree xp-g (luminous Flux 4000 lm, lumen per watt 88 lm/w, colour temperature 3700-5000, Colour rendering index ~80, guaranteed life-time min. 50.000 hrs.) and Cooling unit. Input of the luminaire is adjustable (45w/22, 5w) by changing Output current of the led driver 700ma/350ma. Flange with protective Glass is screwed in the body and locked with securing screw; thread Shapes a rift of flameproof enclosure „d“. Protective hardened glass is Resistant against mech. Shock min. 7 j and is fixed in the flange; the connection Is filled with polyurethane putty. The mobile steel hinge is fixed to The flange and enables to hang up the flange during mounting and dismounting. Steel parts are galva-nized and chromated. Max. Section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases (4-core cable). Luminaire is equipped with 2 inner and 1 outer earthing clamp for conductive connection. Luminaire is designed as through-way one, when used as the end piece there is necessary to substitute one cable gland with blinding screw v-ex or to blind one unused cable gland with blinding plug hsk-v-ex. The blinding parts can be delivered on order optionally. Versions k are equipped with protective guard from steel wire. Packing carton is filled with sealing polyurethane foam instapak. Carton 410 cm x 240 cm x 240cm , Weight 10 kg/pc
1.. Uveïte podrobnosti a technické specifikace 2G Ex de IIC T3-T6 Gb II 2G Ex t IIIC Tmaxsurf.-table Db Technical description: Luminaire consists of body, basic plate and flange with protective glass. Body and flange are castings from AlSi alloy. Steel hinge with eyes o 18 mm is fixed on the upper part of the body. Connecting area (increased safety „e“), with connecting clamps and 2 cable glands HSK-K-Ex M25x1.5 for cables o 9 – 16 mm (HSK-M-Ex for cables 10 – 16 mm for versions F), is placed on the side of the body. This area is covered with cover and sealed with silicon. Steel basic plate with electric parts and reflector is fixed in the body. Flange with protective glass is screwed into the body and secured with securing screw against unlocking; the thread creates a rift of flameproof enclosure „d“. Protective cover from hardened glass is resistant against mechanical shock min. 7 J and is fi xed in fl ange; the connection is filled with a putty (polyurethane glue). Steel mobile hinge is fixed on the flange and enables to hang up the flange under body during mounting or exchanging light source. AlSi parts of luminaire are treated with polyester powder paint; steel parts are galvanized and chromated. Max. section of connecting conductors 4 mm2. Three-pole connecting terminal block enables interchanging 2 phases (4-core cable). Luminaire is equipped with 2 inner and 1 outer earthing clamps. Luminaire is designed as through-way one. When it is used as the end piece, there is necessary to replace one cable gland with blind screw V-Ex or to blind one unused gland with blind plug HSK-V-Ex (versions F: one cable gland must be replaced with blinding screw V-Ms-VMQ-Ex). Blinding parts are not attached - delivered optionally on order only. Versions K are equipped with protective guard from steel wire. All types can be equipped with lampshade (optionally on order only). Packing carton is filled with polyurethane foam Instapak luminous sources: HWL 500W E40, SPC A T CL 250W E40, HQL 250W E40, NAV-E350 350W E40 and other. NOTE ! Ballast box 205.1 can be used for HP Mercury and sodium lamps.. Carton 560 cm x 350 cm x 300cm , Weight 12 kg/pc
Feature: Ceiling mounted high efficiency fixture with A5 and A5 mirror louver. Lamp: T8 or T10 fluorescent Material: Body: sturdy structure made from electrostatic powder coated steel sheet (thickness: 0.5mm). Louver: special high reflective aluminum (imported from Europe, pre-anodize aluminium, thickness: 0.4mm, alloy: 99.85%, light reflection: 86%) High quality polycarbonate lamp holder and starter holder (brand: BJB Germany). High heat resistant wire (þ: 0.5mm). Accessories and reflector are installed and maintained easily. Warranty: 5 years Standard: Designed and manufactured in accordance with EN 6059 EXPORT CARTON PACKAGING
Construction: Pressed & folded sheet steel Pre treated and epoxy powder coated finish Moulded end caps German Alanod aluminium reflector Moulded acrylic diffuser Schools/ offices/ kitchens: Designed as a modern fluorescent luminaire while providing functionality for a wide Varity of lighting solutions. The Uni T5 is high performance fixture with the latest technology providing energy efficient operation with a high light output ratio and a long service life. MX464-Y36x2 T8,2x36W 1255x208x70mm 1295x385x220mm MX464-Y36x2 T8,2x36W 1255x208x70mm 1295x385x220mm MX464-Y58x2 T8,2x58W 1540x208x70mm 1580x410x235mm MX464-Y58x2 T8,2x58W 1540x208x70mm 1580x410x235mm MX464-Y18x2 T8,2x18W 645x208x70mm 685x385x220mm MX464-Y18x2 T8,2x18W 645x208x70mm 685x385x220mm
Aluminum deep drown or Aluminum die cast outdoor Streetlights are used to light roadways and walkways at night and also is a raised source of light on the edge of a road which is turned on or lit at a certain time every night. All light fixtures have fixture body, a light Socket to hold the lamps and allow for the its replacement –which may also have switch to operate the fixture and also require an electrical connection to a power source often by using electrical connector.
The DS Series Luminaire is designed as a direct upgrade replacement for traditional dusk -to-dawn security light units. The Luminaire offers easy mounting. The rugged, corrosion -resistant, die-cast aluminum housing is outfitted with stainless steel hardware and an epoxy coating that offers an extremely long service life and excellent weather resistance. The DS offers multiple light distribution options to improve the visual experience for your specific application. While not commonly available on traditional HID or competing LED products, the DS offers a full line of roadway distribution patterns.
5FT weatherproof emergency luminaires with sensor dimming function The weatherproof emergency luminaires adopts LED chips SMD2835, so the LED emergency luminaires can achieve 130lm/w high lumen out put. This Corrosion-resistant Weatherproof Batten Light has emergency function, able to ensure lighting for more than 3 hours in the event of a power outage. The emergency battery of this Batten Lighting Fixture has a special clip-fixed housing, it's easy for maintenance and replacement. The protection rating of this Weatherproof LED Batten Fixture is high up to IP65, has a high dustproof and waterproof performance. Lamp Luminous Efficiency(lm/w):120 IP Rating:IP65 Warranty(Year):5-Year Place of Origin:Guangdong, China Color Temperature(CCT):3500-6500K Color Rendering Index(Ra):82 Support Dimmer:Yes Emergency Function:Yes Lifespan (hours):70000 Working Time (hours):70000 Lighting solutions service:Lighting and circuitry design, DIALux evo layout, auto CAD layout Light Source:LED CRI (Ra>):80 Model Number:ZL-EWPLP60-5FT-S Brand Name:COMLED Input Voltage(V):AC200-240V Working Lifetime(Hour):70000
Triproof LED lighting luminaire with openable end cover and press type terminal block led linear lighting tri-proof batten luminaire This led triproof batten light adopts openable end cover, is easy to installation. The terminal block of this LED lighting luminaire is press type terminal block, it's easy for quick wiring. The waterproof rating of this Triproof LED light high up to IP66. Lamp Luminous Efficiency(lm/w): 120 Warranty(Year): 5-Year Type: LED triproof light Application: Office, Warehouse, Garage, Factory Lighting solutions service: Lighting and circuitry design, DIALux evo layout, Agi32 layout Model Number: ZL-LSBLP44-5FT-CN Color Temperature(CCT) : 4000K/5000K/6000K Color Rendering Index(Ra) : >80 Support Dimmer: NO Lifespan (hours): 55000 Working Time (hours) : 55000 Length: 5ft IP Rate : IP 66 Beam angle : 120 Degree
2ft emergency waterproof luminaires single tube led linear lights high lumen Batten fixture This single tube emergency waterproof luminaire  adopts SMD2835 chips, can achieve higher lumen out put. The tubes of this single tube led linear light� adopts bridge wiring design, no need to consider the power direction of the tube. It's easy for installation of the Linear LED Batten� Fixture. Besides, the huge terminal of the single tube led linear light� is easy for wiring. This emergency waterproof� luminaire adopts high-grade PC base and milky PC diffuser housing, good quality seal for better waterproof.
led batten waterproof luminaires with openable end cover and press type terminal block waterproof led batten light This waterproof led batten light adopts openable end cover, is easy to installation. The terminal block of this LED batten light is press type terminal block, it's easy for quick wiring. The waterproof rating of this waterproof led batten light high up to IP65. Lamp Luminous Efficiency(lm/w): 140 Warranty(Year): 3-Year Type: LED triproof light, LED Waterproof Batten Light Application: Office, Warehouse, Garage, Factory Lighting solutions service: Lighting and circuitry design, DIALux evo layout, Agi32 layout Model Number: ZL-LSBLP44-5FT-CN Color Temperature(CCT) : 5000K Input Voltage(V) : AC 220-240V Color Rendering Index(Ra) : >80 Support Dimmer: Yes Lifespan (hours): 50000 Working Time (hours) : 50000 Length: 5ft IP Rate : IP 65 Beam angle : 120 Degree
4FT Corrosion-resistant Batten Light linkable emergency waterproof luminaires The emergency waterproof luminaires adopt LED chips SMD2835, so the Waterproof LED Batten Light can achieve 130lm/w high lumen out put. This Waterproof LED Batten Light has emergency function, able to ensure lighting for more than 3 hours in the event of a power outage. The emergency battery of this emergency waterproof luminaire has a special clip-fixed housing, it's easy for maintenance and replacement. The protection rating of this led emergency waterproof luminaire is high up to IP65, has a high dustproof and waterproof performance. Besides, the huge terminal block design of the orrosion-resistant Batten Light is easy for wiring. Lamp Luminous Efficiency(lm/w):130 Warranty(Year): 3-Year Type: LED triproof light Application: Office, Warehouse, Garage, Factory Other attributes Lighting solutions service: Lighting and circuitry design, DIALux evo layout, Agi32 layout Model Number: ZL-EWPLP40-4FT Color Temperature(CCT): 5000K (Daylight) Input Voltage(V): AC 110 or 230V( �¯ 10%) Color Rendering Index(Ra): 80 Support Dimmer: NO Lifespan (hours): 50000 Working Time (hours): 50000 Product Weight(kg): 2.4 Length: 4ft IP Rate: IP 65 Beam angle: 120 Degree Material: PC + PC
Waterproof LED Batten Light with Small Separate Fixed Plate emergency waterproof luminaires This emergency waterproof luminaires designed with high quality construction, white coating steel body and high transmission Polycarbonate diffuser. The intensity of this Waterproof LED Batten Light is more high, and the protection rating is IP20. This Waterproof LED Batten Light incorporating SMD LED technology to achieve a high lumen out put, impact resistant and reduce glares. The huge terminal block of this emergency waterproof luminaires is easy for wiring. The safety hooks design of this Waterproof LED Batten Light is easy for installation. Lamp Luminous Efficiency(lm/w):130 IP Rating:IP20 Warranty(Year):3-Year Place of Origin:Guangdong, China Color Temperature(CCT):5000K Color Rendering Index(Ra):83 Support Dimmer:Yes Lifespan (hours):50000 Working Time (hours):50000 Product Weight(kg):2.3 Lighting solutions service:Lighting and circuitry design, DIALux evo layout, auto CAD layout Light Source:LED CRI (Ra>):83 Model Number:ZL-JSBLP18-2FT-CES Brand Name:comled Input Voltage(V):AC 100V or 220V( �± 10%) Working Lifetime(Hour):50000 Length:2ft Application:Warehouse Material:Iron+PC
Housing: 0.5mm pressed sheet steel in powder coated finish. Diffuser: Opal or reeded acrylic diffuser. End cap: Moulded ABS material end cap. Lampholder: T5,T8 lampholder available for AAG,ED,VS,HE or BJB etc. Ballast: electronic ballast available for Tridonic, Fulham, Advance, Osram.Universal etc. Application: offices, corridors and communal areas in most healthcare, education or commercial applications. MX464-Y14x2 T5 2x14W 590x208x68mm 630x405x225mm 5 MX464-Y21x2 T5 2x21W 890x208x68mm 930x405x225mm 5 MX464-Y28x2 T5 2x28W 1190x208x68mm 1230x405x225mm 5 MX464-Y35x2 T5 2x35W 1490x208x68mm 1530x405x225mm 5 MX464-Y18x2 T8 2x18W 630x208x68mm 670x405x225mm 5 MX464-Y36x2 T8 2x36W 1240x208x68mm 1280x405x225mm 5
Luminaires are used for lightning of: Outdoor and indoor lightning facilities with emergency (reserve) lightning Housing of luminaires is made of aluminum alloy. ptics borosilicate glass or polycarbonate. Luminaires have anti-vandal protection. Different types of mounting allow to install luminaires without improvement of the existing mounting attachments.