Bitumen, Asphalt, Crude Oil, Lubricants, Petrochemicals, CarbonLPG/LNG & CNG, Oil Field Machinery & Equipments, Petroleum By Products, JET-1JP54
Scope Standard: astm d1401 Oil demulsibility tester conforms to national standard gb / t7605 and gb / t7305 provisions of the design and manufacturing for the ability to synthesize liquid oil and water separation determination. Thermostatic bath using a small cylinder design aesthetic appearance, is the latest new equipment. Features 1, the lcd screen english display interactive interface, preset temperature, test time and other parameters; with menu prompts input; 2, the screen displays temperature values, automatic chronograph, date display and the current clock and other parameters; 3, automatic mixing, automatic timing, test tubes stirring motor arm automatic lifting; 4, with a variety of parameters such as clocks tips; 5, imported guide rail lifting device design, low friction, accessibility; Technical parameters 1, sheng wells: 3 2, temperature range: room temperature ~ 100 ?, temperature control accuracy: ± 0.1 ? 3. Timing range: 0 to 99 minutes in any setting 4, stirring speed: 1500r / min 5, supply voltage: ac220v ± 10% 6. Frequency: 50hz ± 5% 50hz 7, the maximum power: =2000va
Petroleum
Main functions and effects: 1.Rapid test oil contaminant, water, metal particles in 3 minutes; 2.400 types of oil data in world market for reference; 3.Print the test result for saving date; 4.AC/DC powered, battery can keep use for 28 hours.
Hi Buyers WE ARE CONNECTED WITH SIX MAJOR RUSSIAN REFINERIES AND 100's OF THEIR SUBSIDIARIES, ANDHAVE ACCESS TO FOLLOWING PRODUCTS _____________________________________________________________________ RUSSIAN DIESEL GAS OIL D2 L-0.02-62 GOST 305-82 RUSSIAN ORIGIN LIQUEFIED NATURAL GAS GOST 5542-87 RUSSIAN ORIGIN LIQUEFIED PETROLEUM GAS GOST 20448-90 (50% PROPANE 50% BUTANE) RUSSIAN FUEL OIL MAZUT M100- GOST 10585-105 RUSSIAN FUEL OIL MAZUT M100- GOST 10585-85 RUSSIAN FUEL OIL MAZUT M100- GOST 10585- 75 RUSSIAN FUEL OIL MAZUT M100- GOST 10585-99 RUSSIAN AVIATION KEROSENE GOST 10227-86 GRADE TS-1 (JET FUEL) RUSSIAN AVIATION FUEL: Jet A1 GOST R 52050-2006 RUSSIAN GASOIL ULSD 10ppm GOST R 52368-2005 TYPE III (EURO 5) EN590 STATNDARD. RUSSIAN DIESEL GAS OIL LSD 50ppm GOST R 52368-2005 TYPE II (EURO 4) RUSSIAN DIESEL GAS OIL 350ppm GOST R 52368-2005 TYPE I (EURO 3) REBCO RUSSIAN EXPORT BLENDS CRUDE OIL GOST 9965-76 RUSSIAN BITUMIN GOST 52056-2003. RUSSIAN BITUMEN GRADE 90/130 GOST 22245-90 RUSSIAN BITUMEN GRADE 60/90 GOST 22245-90 RUSSIAN UREA 46 N PRILLED GOST 2081-92 RUSSIAN UREA 46 N GRANULAR GOST 2081-2010 RUSSIAN DIESEL FUEL OIL D6 RUSSIAN BASE OIL /SN 500 RUSSIAN BASE OIL /SN 150 RUSSAIN BASE OIL /SN 100 RUSSIAN UNLEADED GASOLINE RON OCTANE 93 GOST 2084-77-AI-93 RUSSIAN UNLEADED GASOLINE RON OCTANE 95 GOST 2084-77-AI-95 _____________________________________________________________________________ Step one 1 : Please send your LOI with the full Company KYC/ Profile so that we can get the DD done from refinery Security team. Look forward for your reply. Best Regards JAI at TECHNOTRADERS dot EU
SIMAN LTD cooperates with an European producer of industrial waxes. Our partner is an independent blender and is therefore able to operate best in the raw and semi-finished wax markets, offering products which, besides being the best suited for all requirements, are price competitive. The final goal is the customer's success, to which we contribute with high value-added products. Natural Waxes (Paraffin Waxes):- Obtained from the light lubricating oil distillates and composed of around 90% straight-chain hydrocarbons (20 to 30 carbon atoms). Animal (beeswax, lanolin, tallow) Vegetable (carnauba, candelilla) Fossil or mineral (ceresin, montan, ozokerite) Petroleum (paraffin, microcrystalline, petrolatum) Synthetic waxes (Microcrystalline waxes):- Obtained through mixing heavy lubricant oil distillates and residual oils, these waxes have a loosely defined crystalline structure, a darker colour and generally have a higher melting point and viscosity than paraffin's. Ethylenic polymers (polyethylene and polyol ether-esters) Chlorinated naphtalenes
MOQ : 1 Million Barrels (BBLs) Barrels
Supervac industries manufactures silicone grease especially for vacuum systems and it is known worldwide for its excellent properties. It has been formulated specially to protect and enhance the working of joints and o-rings in vacuum systems. It is an alternative of dow silicone grease. For more details please visit: - http://supervacoils.Com/high-vacuum-silicone-grease-sv-g9/ 1. Sv-g9 vacuum grease reduces the leak rates associated with o rings and other vacuum connections. Hence, along with being used as a lubricant, it is also used as a sealant for joints in vacuum systems. 2. Water proof and moisture resistant. 3. Corrosion inhibitor. 4. Maintains its consistency, i.E., does not melt or solidify even in extreme temperatures. Sv-g9 can withstand temperatures as low as -25° c to as high as 250° c 5. Preserves the rubber parts and doesn’t let them swell or soften up with heat. 6. Because of being stiffer than normal lubricants, it’s not runny and doesn’t contaminate the vacuum system. 7. Recommended for ultra high vacuum systems. Supervac’s sv-g9 is used for vacuums reaching between 10-5 and 10-8 torr. 8. Very low vapor pressure (therefore, no oil vapor back streaming takes place)
1., made up of ultra-pure boron nitride powder (99% purity) 2., can withstand very high temperatures 3., not wetted by liquid aluminum 4., excellent resistance to chemical attacks 5., high surface coverage 6., excellent lubricating and release properties 7., excellent adhesion to the surface 8., stable suspension which means no water separation 9., excellent electrical insulator 10., high thermal conductivity 11., forms a smooth protective barrier 12., chemically inert to most molten metals 13., improves the sliding properties 14., easy to apply 15., easy removal
Saudi light crude oil, gravity 33% Barrels
D2, JP54, Mazut M100, LPG, LNG, Bitumen etc
Product Description "Cashew Nut Shell Liquid (CNSL) has innumerable applications in polymer based industries such as friction linings, paints and varnishes, laminating resins, rubber compounding resins, cashew cements, polyurethane based polymers, surfactants, epoxy resins, Oil soluble Resins, Surface Active Agent, Synthetic Rubber & Wax compounding, Foundry Resins and intermediates for chemical industry. CNSL is used as industrial fuel for factories in cold areas -42 degrees, flammable solvent Change oil FO." Price of product ( USD price or FOB price) : "USD 300 - 450 USD per MT Payment Term DP,LC,TT Delivery Time Shipment within 7 working days" Product origin : Vietnam Key Specifications/Special Features : "Colour: Black Brown Viscosity: 260 Max PH: 7 Min Ash content: 0.8% Max Moisture: 1% Density (25C): 0.960 max Volatile matter content: 2.0% max Minimum Order Size and Packgaing details : "Packed by Steel Drum,Flexibag, Isotank,IBC tank Minimum Order Quantity20 feet container"
Jet fuel Barrel
1. Average grain size : 2, 500 ~ 2, 800 (unit/mm2) 2. Density : 17.48 (g/cm3)
Carbon Black Feedstock Oil: Carbon Black Feedstock is a complex mixture of hydrocarbons produced as the residual fraction of distillation products from catalytic cracking process. It consists of hydrocarbons having carbon umbers predominantly >C20 and boiling above 662 F / 350 C The AS description of this stream states that it is likely to contain < 5% 4 to 6-membered condensed ring polycyclic aromatic hydrocarbons. We offer Carbon Black Feedstock of Ukrainian/Russian origin as well as Iranian origin. For inquiries please contact us, or send your LOI/ICPO directy to contact(at)altorathgroup.com. Negotiable
Scope Distillate fuel oil oxidation stability tester side given instrument (accelerated method) according to sh / t0175-94, astmd2274 and other standards to determine the initial boiling point of not lower than 175 ?, 90% point distillation temperature no higher than 370 ? of middle distillate fuels inherent stability and performance of the oil. I.E., in the case of an active metal surface and the water or dirt and other environmental factors do not exist, the sample is exposed to the atmosphere in the ability of anti-change. Features 1, the fixed value regulator valve to provide a constant flow of oxygen test. 2, thermostatic bath, large capacity, good insulation properties, and can make six samples tested. 3, oxidation tube with radial clamping, easy operation and reliable. 4, the camera obscura after the oxidation test tube directly into which were cooled at room temperature 5, sample oxidation time automatic control, when the alarm system. 6, the instrument uses metal bath, heating speed, good stability, environmental protection Technical parameters 1, oxidation flowmeter: six oxidation test flow meter can be adjusted individually, the test flow rate: 50 ± 5ml / min. 2, constant temperature bath: the use of fld metal bath. 3, the thermometer: in line with gb / t514-83 standard, wlh-33c, 50-100 ?, 0.5 ? indexing rod 4. Temperature control mode: automatic heating, automatic temperature control 5, temperature accuracy: 95 ± 0.2 ? 6, oxidation tube: borosilicate glass, in line with sh / t0175-94 standard 7, electric heaters: when the main heater 220v 2500w, auxiliary heating 800w. 8, the regulator valve oxidation: oxidation is the oxidation stability, in front of the flow meter with regulator valve
Scope UV fluorescence sulfur analyzer is based on UV fluorescence measurement principle and the development of computer technology combined with a new generation of precision instruments, is currently the most advanced of the total sulfur content tester, in line with ASTM D5453, SH / T 0689 and other standards, the instrument is National total sulfur content of refined oil arbitration standards. Now widely used in the determination of total sulfur content of crude oil, hydrocarbons and fuel, petroleum, plastics, petrochemicals, food and so on. Measurement principle instrument uses ultraviolet fluorescence method, when the sample is introduced into the pyrolysis furnace, cracking occurred sample oxidation of sulfide which quantitatively converted to sulfur dioxide, carried by a carrier gas, off which the water through a membrane dryer, into the reaction chamber, sulfur dioxide absorbing ultraviolet light energy into an excited state of sulfur dioxide (SO2 *), the fluorescence emission of sulfur dioxide when SO2 * to return to a stable state, the energy released by a photomultiplier tube to receive, and then the micro-current amplifier, computer data processing, the amount of reaction with sulfur dioxide emission intensity is proportional to the amount of sulfur dioxide and total sulfur content in the sample is proportional, so the content of the sample can be determined by measuring total sulfur emission intensity. Features 1, computer-controlled operation, enabling interactive, data, peak shape can be automatically stored print. 2, the operating software can be connected with LIMIS system, automatic data transmission. 3, the instrument uses the new quartz pyrolysis tube, the injection volume can be increased to reduce measurement errors, increase the sensitivity of the instrument, higher repeatability. 4, cooling fans, automatic switch, eliminating the need to wait for the shutdown to finish samples trouble, saving time and effort. 5, darkroom system uses the latest technology, the key components imported detecting element to improve the detection accuracy and sensitivity of the instrument. 6, equipment imported membrane dryer to absorb , eliminating the need to frequently replace magnesium perchlorate of trouble, while reducing the leakage problem. 7, using computer control of temperature, improve the instrument precision temperature control, and difficult to over-temperature. 8, using air instead of water cooling, saving water resources. 9, can be adjusted to take existing calibration curve calibrated using a standard sample after sample analysis. Technical Parameters 1, in line with standards: ASTM D5453, SH / T 0689 and other standards 2, measuring range: 0.2mg / L ~ 10000mg / L ~ percentage 3. Air source: Argon: 99.999% Oxygen: 99.999% 4, sample status: solid, liquid, gas (with corresponding injector) 5, temperature range: room temperature ~ 1100 ? ± 3 ? 6, repeatability error: 0.2mg / L=X
Scope Standard: sh / t0123 Sample in 95 ° c, which leads to constant dry air, test 312h, by measuring changes in growth and sedimentation value of the sample value 100 ° c kinematic viscosity. Features 1, extreme pressure lubricant oxidation characteristics analyzer using intelligent temperature controller with a microprocessor, with self-tuning, self-diagnostic function, pid three parameters to adjust the temperature, auxiliary heating automatically turn off, thus high precision temperature control, performance stable and reliable. 2, extreme pressure lubricant oxidation characteristics analyzer with automatic timing device, without manual timing, when the alarm. 3, extreme pressure lubricant oxidation characteristics analyzer using precision flowmeter control systems, flow can be set with the user. 4, extreme pressure lubricant oxidation characteristics analyzer uses an integrated setting, operation and maintenance simple and convenient. Technical parameters 1, temperature range: room temperature ~ 150 ° c, temperature control accuracy: 0.1 °c. 2, temperature control mode: intelligent temperature control thermostat. 3, power supply: ac220v 50hz. 4, the heating method: oil bath. 5, the timing device: automatic timer. 6, the flow control: precision flowmeter.
Scope This instrument conforms to sh / t0093 and astm d2276 m1l-t-5624n standards. It can detect contaminants propellant solid particles. Under specified conditions, the samples were filtered glass sand core filtration devices, increase the weight on the microporous membrane filters is the total sample contaminants. Features 1, the instrument for the desktop, stainless steel control panel, ceramic coating; 2, digital timer, fengming alarm; 3, the evacuation time can be set arbitrarily; 4, low noise pump; 5, the standard glass fittings, conforming to astm standards; 6, using molding and metal clamp; Technical parameters 1. Filter: vacuum pumping 2, vacuum degree: 80kpa 3, machine power: 500w 4, the working units: a standard filtration system 5 power supply: ac220v / 50hz 6. Timing: digital timer