BMR series motor adapt the advanced Gerolor gear set design with shaft distribution flow, which can automatically compensate in operating with high pressure , provide reliable and smooth operation, high efficiency and long life.
Characteristic Features:
*Advanced manufacturing devices for the Gerolor gear set, which use low pressure of start-up, provide smooth, reliable operation and high efficiency.
*Shaft seal can bear high pressure of back and the motor can be used in parallel or in series.
*Special design in the driver-linker and prolong operating life
*Special design for distribution system can meet the requirement of low noise of unit.
*Compact volume and easy installation.
Hydraulic orbit motor bmt
Bmt series motor adapt the advanced gerotor gear set design with disc distribution flow and high pressure. The unit can be supplied the individual variant in operating multifunction in accordance with requirement of applications.
Characteristic features:
Advanced manufacturing devices for the gerotor gear set, which use low pressure of start-up, provide smooth and reliable
Operation and high efficiency.
The output shaft adapts in tapered roller bearings that permit high axial and radial forces. Can offer capacities of high pressure and high torque in the wide of applications.
Advanced design in disc distribution flow, which can automatically compensate in operating with high volume efficiency and long life, provide smooth and reliable operation
Bmr series motor adapt the advanced gerolor gear set design with shaft distribution flow, which can automatically compensate in operating with high pressure , provide reliable and smooth operation, high efficiency and long life.
Characteristic features:
*advanced manufacturing devices for the gerolor gear set, which use low pressure of start-up, provide smooth, reliable operation and high efficiency.
*shaft seal can bear high pressure of back and the motor can be used in parallel or in series.
*special design in the driver-linker and prolong operating life
*special design for distribution system can meet the requirement of low noise of unit.
*compact volume and easy installation.
Substitute reference substance
Motor cross reference table
Hanjiu
Hydraulic
M+s
Hydraulic
Eaton
Char lynn
Danfoss
Ross
Trw
White
Cross
Parker
Sam
Brevini
Bosch
Recroth
Bmm
Mm mlhk
J series
Omm
Bgm
Mgx
Bmp/bm1
Mp hp
H series
Omp dh
Mf mg
Wp rs
Tc te tb
Bg
Mgp gxp
Bmr/bm2
Mr hr mlhrw, rw
S, t series w series
Omr ds omew
Mb
Wr re
Tf
Br
Mgr gmr
Bmh/bm4
Mh mlhh hw hwf
Omh
Me
Re
Tg
Bms/bm5
Ms msy mlhs
2000 series
Oms
Me
Re
Tg
Hpr
Mgs gms
Bmv series motor adapt the advanced gerotor gear set, design with disc distribution flow and high pressure. The unit can be supplied theindividual variant in operating multifunction in accordance with requirement of applications.
Characteristic features:
*advanced manufacturing devices for the gerotor gear set, which use low pressure of start-up, provide smooth and reliable operationand high efficiency.
*the output shaft adapts in tapered roller bearings that permit high axial and radial forces. Can offer capacities of high pressure and hightorque in the wide of applications.
*advanced design in disc distrbution flow, which can automatically compensate in operating with high volume efficiency and long life, provide smooth and reliable operation.
Substitute reference substance
Motor cross reference table
Hanjiu
Hydraulic
M+s
Hydraulic
Eaton
Char lynn
Danfoss
Ross
Trw
White
Cross
Parker
Sam
Brevini
Bosch
Recroth
Bmm
Mm mlhk
J series
Omm
Bgm
Mgx
Bmp/bm1
Mp hp
H series
Omp dh
Mf mg
Wp rs
Tc te tb
Bg
Mgp gxp
Bmr/bm2
Mr hr mlhrw, rw
S, t series w series
Omr ds omew
Mb
Wr re
Tf
Br
Mgr gmr
Bmh/bm4
Mh mlhh hw hwf
Omh
Me
Re
Tg
Bms/bm5
Ms msy mlhs
2000 series
Oms
Me
Re
Tg
Hpr
Mgs gms
BMR series motor adapt the advanced Gerolor gear set design with shaft distribution flow, which can automatically compensate in operating with high pressure , provide reliable and smooth operation, high efficiency and long life.
Characteristic Features:
*Advanced manufacturing devices for the Gerolor gear set, which use low pressure of start-up, provide smooth, reliable operation and high efficiency.
*Shaft seal can bear high pressure of back and the motor can be used in parallel or in series.
*Special design in the driver-linker and prolong operating life
*Special design for distribution system can meet the requirement of low noise of unit.
*Compact volume and easy installation.
Substitute Reference substance
MOTOR CROSS REFERENCE TABLE
HANJIU
HYDRAULIC
M+S
HYDRAULIC
EATON
CHAR LYNN
DANFOSS
ROSS
TRW
WHITE
CROSS
PARKER
SAM
BREVINI
BOSCH
RECROTH
BMM
MM MLHK
J SERIES
OMM
BGM
MGX
BMP/BM1
MP HP
H SERIES
OMP DH
MF MG
WP RS
TC TE TB
BG
MGP GXP
BMR/BM2
MR HR MLHRW,RW
S,T SERIES W SERIES
OMR DS OMEW
MB
WR RE
TF
BR
MGR GMR
BMH/BM4
MH MLHH HW HWF
OMH
ME
RE
TG
BMS/BM5
MS MSY MLHS
2000 SERIES
OMS
ME
RE
TG
HPR
MGS GMS
BMM series motor are small volume,economical type,which is designed with shaft distribution flow, which adapt
the Gerotor gear set design and provide compact volume,high power and low weigth.
Characteristic features:
* Advanced manufacturing devices for the Gerotor gear set, which provide small volume, high efficiency and long life.
* Shaft seal can bear high pressure of motor of which can be used in parallel or in series.
* Advanced construction design, high power and low weight.
Main specification
type
BMM8
BMM12
BMM20
BMM32
BMM40
BMM50
displacement
8.2
12.9
19.9
31.6
39.8
50.3
Max speed(rpm)
rated
1537
1256
814
513
452
358
Cont.
1950
1550
1000
630
500
400
int.
2450
1940
1250
800
630
500
Max Torque
(N*M)
rated
8
13
19
31
37
33
Cont.
11
16
25
40
45
46
int.
15
23
35
57
70
88
peak
21
33
51
64
82
100
Max speed
(kw)
rated
1.3
1.7
1.7
1.7
1.7
1.2
Cont.
1.8
2.4
2.4
2.4
2.2
1.8
int.
2.6
3.2
3.2
3.2
3.2
3.2
Max pressure
drop(MPa)
rated
9
9
9
9
8.5
6
Cont.
10
10
10
10
9
7
int.
14
14
14
14
14
14
peak
20
20
20
16
16
16
Max flow(L/min)
rated
14
18
18
18
20
20
Cont.
18
20
20
20
20
20
int.
20
25
25
25
25
25
Weight(kg)
1.9
2
2.1
2.2
2.3
2.4
Type
Max.inlet pressure
BMM8-50 Cont. 17.5
(Mpa) Int. 22.5
* Continuous pressure:Max. value of operating motor continuously.
* Intermittent pressure :Max. value of operating motor in 6 seconds per minute.
* Peak pressure:Max. value of operating motor in 0.6 second per minute.
Basic Info.
Attribute Attribute value
Model NO BMM
Power Hydraulic
Export Markets Global
Structure Hydraulic motor,orbital hydraulic motor
Material Cast iron
OEM Accept
Substitute Reference substance
MOTOR CROSS REFERENCE TABLE
HANJIU
HYDRAULIC M+S
HYDRAULIC EATON
CHAR LYNN DANFOSS ROSS
TRW WHITE
CROSS PARKER SAM
BREVINI BOSCH
RECROTH
BMM MM MLHK J SERIES OMM
BGM MGX
BMP/BM1 MP HP H SERIES OMP DH MF MG WP RS TC TE TB BG MGP GXP
BMR/BM2 MR HR MLHRW,RW S,T SERIES W SERIES OMR DS OMEW MB WR RE TF BR MGR GMR
BMH/BM4 MH MLHH HW HWF
OMH ME RE TG
BMS/BM5 MS MSY MLHS 2000 SERIES OMS ME RE TG HPR MGS GMS
BMT/BM6 MT MLHT MTM 6000 SERIES OMT TMT MJ
The advantages of the hydraulic steering control units:
1,Low cost, reliable.
2,No load reaction on the steering wheel comfortable.
3,Manual operation available when the pump does not work.
4,Low control torque, continuous operation.
5,According to the system, different function and pressure level valves available.
BZZ Series Hydraulic Steering Control Units
As for load sensing steering system, the steering system and the operational system may use the same pump through the priority valve or the load sensing system can distribute the surplus oil of the steering system into the operational system. Meanwhile, if the pump with load sensing is used ,the load sensing will have obviously productive results.
The LS port of the load sensing steering unit has to connect with priority valve or LS port of load sensing pump, so that the signal of the steering load pressure of the steering unit can be transferred to priority valve or load sensing pump through oil hose, to controlthe oil volume supplied to steering unit by the control system.
Hydraulic Steering Control Units widely apply in construction machinery, forklift, tractor, combine harvester and so on.
Meets the requirements of:
Dexron III H
Ford Mercon
MB 236.20
Ford ESP M2C 166-H
Ford ESP M2C 138-CJ
CAT TO-2
Allison C4
Packaging:
1 L metal container 12 units / case
4 L metal container 4 units / case
20 L plastic container 1 unit / case
TECHNOL ATF III H is a high quality automatic transmission fluid formulated for automatic, semi-automatic transmissions, and torque converters of passenger, light commercial and industrial vehicles that require GM DEXRON III H or Mercon. This fluid can also be used for hydrostatic transmissions, power steering and hydraulic systems. Having a high viscosity index, this fluid provides excellent resistance to corrosion and foam formation. It also has outstanding thermal stability, antioxidant, antirust, antiwear properties and offers high-level protection under all conditions. Its excellent friction properties meeting the requirements of GENERAL MOTORS Hydramatic ensure smooth gear shifting.
208 L drum -
BMP series motor are small volume, economical type, which is designed with shaft distribution flow, which adapt the Gerotor gear set design and provide compact volume, high power and low weigth.
Characteristic Features:
* Advanced manufacturing devices for the Gerotor gear set, which provide small volume, high efficiency and long life.
* Shaft seal can bear high pressure of motor of which can be used in parallel or series.
* Advanced construction design, high power and low weight.
BMT series motor adapt the advanced Gerotor gear set design with disc distribution flow and high pressure. The unit can be supplied the individual variant in operating multifunction in accordance with requirement of applications.
Characteristic Features:
*Advanced manufacturing devices for the Gerotor gear set, which use low pressure of start-up, provide smooth and reliable
operation and high efficiency.
*The output shaft adapts in tapered roller bearings that permit high axial and radial forces. Can offer capacities of high pressure and high torque in the wide of applications.
*Advanced design in disc distribution flow, which can automatically compensate in operating with high volume efficiency and long life, provide smooth and reliable operation.
Order Code:
z
Code Remarks
BMT
BMTS?
Displacement
160
200
250
315
400
500
630
800?
Flange
4 4-14 Square-flange160,pilot1259 BMT
K6 4-14.5Square-flange162,pilot1279
W 4-18 Wheel-flange200,pilot1607
D 4-14 Circle-flange 160,pilot 1258 BMTS
E 4-14.5 Square-flange 162, pilot 12710
Output Shaft
M Shaft 40,parallel key 12870 BMT
G Shaft 38.1,parallel key 9.529.5257.15
F Shaft 38.1,splined tooth 17-DP12/24
FD Shaft 38.1,splined tooth 17-DP12/24
T Cone-shaft 1:10 45,parallel key B12828
T1 Cone-shaft 1:8 45,parallel key 11.1311.1331.75
SL shaft 34.85,Splined key,Splined key 6-34.8528.148.64
G1 shaft31.75,parallel key 7.967.9640
F1 Shaft 31.75,splined tooth 14-DP12/24
Omit Short shaft 16-DP12/24 BMTS
Port and Drain Port
D G3/4 Manifold Mount,4-M10 , G1/4
M M272 Manifold Mount,4-M10, M141.5
S 1-1/16-12UN O-ring, 9/16-18UNF
S1 1-1/16-12UN O-ring, 7/16-20UNF
G G3/4,G1/4
M3 M272,M141.5
Rotation Direction
Omit Standard
R Opposite
Paint
00 No paint
Omit Blue
B Black
S Silver grey
Unusually Function
Omit Standard
LL Low Leakage
F Free Running
LS Low Speed
The device is to service at such industries as china traditional drug, foodstuff and chemistry for the technologies such as normal pressureíómini pressure, water decocting, warm immersion, thermal circumfl uence, compelled recycle and leakage, extraction of aroma oil and reclamation of organic solvent with the features of high efficiency and convenient operation. The cip cleaning system inside the tank meets with the gmp standard.
With single gas cylinder and lock with dual-gas cylinder accompanied with a secure gas-lock cylinder. The complete device is easy to start and has a reliable self-lock performance. The programmed control eliminates the leakage or detachment caused from the unstable gas pressure for traditional structure with omplete security.
A. Introduction of GFHY series photovoltaic hydraulic pile driver
GFHY series photovoltaic hydraulic pile driver is an important equipment for the construction of photovoltaic power stations. It is mainly used for pile driving and hole drawing work of pile foundation, providing a solid foundation for the installation of photovoltaic brackets. Photovoltaic hydraulic pile driver can adapt to different geological conditions such as mountains, hills, deserts, etc., and can choose spiral drilling, down-the-hole impact and other piling methods for construction operations, providing a more efficient, environmentally friendly and reliable solution for the construction of photovoltaic power stations.
B. Features of GFHY series photovoltaic hydraulic pile driver
a. It adopts advanced hydraulic system, with large torque of power head, high piling efficiency and low energy consumption.
b. The chassis adopts engineering-specific crawler, with wide and stable crawler plate, good off-road performance, and can adapt to various complex and changeable terrains.
c. The chassis can be equipped with 360 rotation function to realize all-round drilling construction.
d. It is centrally controlled through the operating table, simple to operate, safe and reliable.
e. It is equipped with front and rear positioning cylinders, left and right swing cylinders and upper and lower telescopic compensation cylinders, which can accurately locate the pile hole position in three aspects.
f. The overall welding of the equipment is rigorous, and the wear-resistant parts adopt heat treatment process to avoid structural deformation, with a long service life and low failure rate.
TOP QUALITY CONSTRUCTION: Our 1500 Series Pillowcases are 100% High Quality Microfiber , Double Brushed on both sides and are softer and more breathable then Egyptian Cotton. *Inside stitching features open pocket creating an envelope enclosure to optimally hide the pillow
PERFECT FIT AND EASY TO CARE FOR: Queen Size STANDARD Pillowcase 20" x 30" (51cm x 76cm)Wrinkle free, No ironing necessary, Machine Washable, Do not bleach, Colors made to match all other HC Collection Products
DON'T SETTLE FOR CHEAP IMITATION: There may be cheaper alternatives offered online but our Top selling Quality Bedding Products are made with the HIGHEST QUALITY FABRIC so you know it lasts! Made from 100% Double Brushed Microfiber fabric for OPTIMAL SOFTNESS YOU CAN SEE AND FEEL! Hypoallergenic & Resistant to dust mites
As a manufacturer of home textiles, enright offers a variety of high quality sheets at an unbeatable price for all your bedding needs.We are committed to providing you with the best customer service, and work hard to provide you with the best quality products at an unmatched affordable price.Out 1500 Thread Count Egyptian Quality 2pc Set of Pillow Cases, Silky Soft & Wrinkle Free SIZES (Standard), Burgundy anti-wrinkle and anti-fading.Machine wash the same color cold.Don't iron, dry clean or bleach. Here is the experience price of US2.05
1. Inner check valve: the check valve inside the valve body is to insure the hydraulic oil will not be returned.
2. Inner relief valve: the relief valve inside the valve body is able to adjust the hydraulic system working pressure.
3. Oil way: parallel circuit, with power beyond.
4. Control way: manual, air, air&electric, micro-switch, electric&hydraulic control.
5.Valve construction: monoblock construction, 1-8 levers are available to assembled as you requests.
6.Spool function: o, a, y , p etc.
7. Flow 40 l/min with pressure 160bar, 200bar, 315bar
8.Spool returning type with t (spring return) and w (ball locking)
9. Joining port: l (screw connection)
10 .Nominal diameter: g1/2; g3/8; m18*1.5
3609 Tq Series Hydraulic Casing Tong Suppliers
Short on time? Let Tq Series Hydraulic Casing Tong sellers contact you.
