SILICON WAFERS are the building blocks of modern technology, they provide the substrate onto which circuits are constructed. We offer Prime, Test, Monitor, SEMI standard, and customized silicon wafers in all diameters from 2�¢?�³ to 300mm. Our Wafers meet the SEMI standards, along with customized options.
Silicon On Insulator (SOI) Wafers: Chips fabricated on SOI wafers achieve 30% faster speeds and 80% lower power demands compared to CMOS devices. The SOI structure consists of three layers: a top active device layer for transistor fabrication, a buried oxide (BOX) insulator layer, and a bottom handle wafer layer.
Silicon Float Zone Wafers: is a crystal growth technique that produces highly pure silicon wafers with fewer impurities than traditional methods.
Silicon Thermal Oxide Wafers: Has high quality silicon thermal oxide wafers in all diameters from 2�¢?�³ to 300mm.
Silicon Nitride Wafers: Has different option of film processing for your silicon needs, including LPCVD nitride.
On Insulator (SOI): Has high quality silicon thermal oxide wafers in all diameters from 2�¢?�³ to 300mm.
Fused Silica Wafers: is the amorphous phase of quartz (SiO2).
Borofloat 33 Glass Wafers: is used in a wide range of applications like micro-optics, sensors, microlithography, semiconductor engineering, lighting, medical technology.
Product Description
Major technical data:
Accuracy class: 1.0
Power consumption: <9.0
Rated voltage: 220v
Basic current: 2.5(10) a 5(30) a 10(50) a
Precision: 1.0
Operating life: >20 years.
Main functions:
1) Measurement of 50hz for 3-phase active power
2) 4 tariffs and 8 time periods for user's option
3) RS 485 communication functions
4) Manual and remote control program, and remote-metering functions
5) To record the parameters automatically through CMRI.
Features:
1) High accuracy, reliability, overload capability
2) Low power consumption
3) Smt technology and re-flow soldering technology
4) Light weight, small size, easy to install.
1. Basalt short fiber - a new material to replace steel fiber. Basalt short fiber is an inorganic mineral fiber with a length of less than 50mm, which can be evenly dispersed in cement concrete.
2. Characteristics of basalt short fiber (1) the specific gravity of steel fiber is 7.8 and that of cement concrete is 2.5. After mixing, the specific gravity of steel fiber is higher than that of cement, and the cement will sink and have poor dispersion.
The specific gravity of basalt short fiber is 2.6, which is basically equivalent to that of cement concrete. After mixing, it does not sink, has good dispersion, is degradable, and is green. The road surface will not be as hard as steel fiber, resulting in car driving noise..
(2) Basalt staple fiber is a real "multifunctional" fiber. Acid and alkali resistance (especially alkali resistance, fully applicable to cement concrete), low and high temperature resistance, insulation and sound insulation. The tensile strength is three times that of steel fiber. The corrosion resistance of basalt fiber is better than that of steel fiber. The compressive strength is 20% higher than that of steel fiber, which is suitable for harsh environment. It has excellent comprehensive performance.
(3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of 50% steel fiber.
(4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with cement concrete and mortar. Fresh basalt fiber concrete has stable volume, good workability and durability, and has excellent high temperature resistance, impermeability, crack resistance and impact resistance.
Product Name : Dehydrated White Onion Chopped
HS Code : 07122000
Category : White, Pink, Red
Packaging Options : 20/25 Kgs PP Bag/Cartoon Box or Customized
Loading Option : 14 MTS (20 FT), 24 MTS (40FT)
Aroma : sweet and spicy
Size : 3 to 5 mm / 5 to 7 mm
Product Expiry : 2 Years in 5 C - 12 C Storage at Dry Place
Source / Origin : India
The Dehydrated onion chopped is manufactured from the onion flakes, which are mainly used as ingredients in ready-to-eat products to add the caramelized sweetish onion flavor. The onion chopped is also used in vegetable curries or non-veg gravy and fried dishes. It is also utilized in burgers, sandwiches, hot dogs, and pizza for a pungent aromatic flavor of onion.
Due to some specific usage, the dehydrated onion flakes having large dimensions are not suitable for several food items such as grilled or steamed ones. Hence, some finer substitutes of the dry onion flakes, viz., minced, chopped, granular, and powdered are also proposed. From all these varieties, the dehydrated onion chopped is manufactured from the dry onion flakes. In the starting phase, the unwanted impurities in the form of the outer skin and plant roots are removed by the sorting process. It is then passed through the cutting machine to obtain a finer sized product of the dried onions. At the last stage, chopped onions are processed via the Vibro table having 3 to 5 mm dimensions. This final 3 to 5 mm dried chopped onions are also known as Dehydrated Onion Chopped. There are mainly three different varieties of chopped onions produced by SKY Agri Export. These are commonly categorized based on the color of the onion flakes used as the raw material, such as the White Onion Chopped, Red Onion Chopped, and Pink Onion Chopped. Out of these three types, the dehydrated white chopped onions are in high demand from North America, European countries, and Russia. The other two types of chopped dried onions, i.e., pink and red ones, are also supplied as cheaper options.
7047 Network Multifunction Panel Meter Three Phase Wi Suppliers
Short on time? Let Network Multifunction Panel Meter Three Phase Wi sellers contact you.
DTSY1088 single phase integrated type keypad meter measures total active energy. It is STS certified and complies with the standards of IEC62052, IEC62053, IEC62055, IEC62056 etc . The Measurement and Control Unit (MCU) is BS standard complied and can be installed into meter box to prevent unauthorized operation.
FEATURES
1.Easily configurable Prepaid & Postpaid mode .
2.Reverse energy measured in forward.
3.Easily configurable user friendly kWh.
4.Configurable LCD displaying items
5.Programming reading by optical
6.Communications between MCU and MSDS is 4G/3G/GPRS (MCU to DCU is RF/PLC )
7.Real time measures voltage, current, frequency, active power, etc.
8.Events record with time stamp.
9.Open Protocol: DLMS/COSEM
10.Plug&Play Communication modules(RF/PLC/4G/3G/GPRS optional )
DESCRIPTION
Adopting large scale IC and SMT processes,the DTSD1088 DLMS meter is made to accurately total active/reactive energy,forward and reverse active/reative energy and maximum demand.And in real-time it also measures and takes in process parameters like active/reactive power,apparent power,Voltage,current,power factor,frequency and so on,and implements time-of-use control,automatic stroge of reading-day demand,and records load profile and events.And with infrared,RS485,PLC communications equipped,the DTSD1088 DLMS meter is an ideal device to realize time-of use energy measurement and efficient processing in ease.It complies with applicable standards of IEC62052-11,IEC62053-21,IEC62053-61,IEC62054-21,IEC62056-61,IEC62059-11,IEC62059-21.
FEATURES
1. Energy measurement (separate and total):Forward and reverse,active,four-quadrant,time-of use,sub-phase.
2. Demand record
3. Real-time parameters
4. Data archive
5. Data freezing
6. Events record
7. Optional infrared,PLC,M-BUS,Ethernet,GPRS communication
DTSD1088 three phase multifunctional meter is made to accurately measures total active/reactive energy, forward and reverse active/reactive energy and maximum demand. And in real-time it also measures and takes in process parameters like active/reactive power, apparent power, voltage, current, power factor, frequency and so on, and implements time-of-use control, automatic storage of reading-day demand, and records of load profile and events. DTSD1088 meter realizes time of use energy measurement and efficient processing in ease. It complies with applicable standards of IEC62052-11, IEC62053-21, IEC62053-23, IEC62053-661, IEC62054-21, IEC62056-61, IEC62059-11 and IEC62059-21.
FEATURES
1.Customized meter design for Finland Utility.
2.Special terminal block connection for easy wiring.
3.Terminal cover &front cover with detecting features.
4.With backup battery for RTC.
5.Load Profile(Optional)
6.MD measurement
7.Over-load protection: Automatic power-off as load exceeds the specified value(optional)
DTSD1088 three phase multifunctional meter is made to accurately measures total active/reactive energy, forward and reverse active/reactive energy and maximum demand. And in real-time it also measures and takes in process parameters like active/reactive power, apparent power, voltage, current, power factor, frequency and so on, and implements time-of-use control, automatic storage of reading-day demand, and records of load profile and events. With infrared, RS485, PLC and GPRS communication equipped, DTSD1088 meter realizes time of use energy measurement and efficient processing in ease. It complies with applicable standards of IEC62052-11, IEC62053-21, IEC62053-23, IEC62053-661, IEC62054-21, IEC62056-61, IEC62059-11 and IEC62059-21.
FEATURES
1.Functional LCD displays(menu driven, scrolling function, IR remote control mode)
2.Events record: Power-on/power-off (latest ten time), power quality monitoring(10 times), meter cover open(10 times recorded and can be read by MDM software).
3.Load curve recording: Active/reactive energy, voltage(3 phases), current(3 phases), power factor(3 phases) and time stamp(DD/MM/HH/YY)
4.External relay
5.Over-load protection: Automatic power-off as load exceeds the specified value(optional)
6.RTC, broadcast time synchronization via communication interface(could be set by GPS time via the MDM)
7.Optional multi-communication: PLC based on OFDM according to CENELEC standards(A-band), GPRS(SIMCOM-chip), RS485, integrated M-Bus(extended connection to gas and water meters) according to OMS standard.
2.Measuring the different constant meters synchronously.
3.With the protect function of overload, short voltage circuit and open current circuit.
4.The testing software with friendly windows 2000 and xp interface, include functional module of all kinds of modern energy meter needed, to reality error test, harmonic test, demand test, influence test.
5.The stored testing data can be transferred to multi-format for other program using
1. Check the error of active and reactive of watt-hour meter at the same time, and meanwhile check the error of main and secondary meter in the same circuit.
2. Display the electrical constants such as: voltage, current, power, power factor, phase and frequency and etc.
3. Measure ct ratio, wave form display.
4. Measure 2-51 voltage and current harmonics.
5. Judge wrong wiring.
6. Measure the baud rate for multi-function energy meter and meter number reading.
.1 Description
DEM8900-1/DEM8900-2/DEM8900-3 (short form for DEM8900) is designed by adopting the updated microprocessor and digital signal processing technology, which can be applied for monitoring the electrical system. DEM8900 can measure and analyze the real time electrical parameters, such as I,kWh,kvarh., Meanwhile, DEM8900 has functions of multi-tariff,RS485 communication ( MODBUS protocol),analog output, remote input and electrical pulse output.
All our instruments fulfill all important requirements and regulations concerning electromagnetic compatibility and safety isolation (IEC61000, IEC1010 standard and EN61010 standard). The devices have been developed, manufactured, and tested in accordance with Quality Assurance System ISO 9001.
1.2 Measured parameters
Note 1. DEM8900-1 measure current, active energy, active power (optional, with analog output)
2. DEM8900-2 measure current, reactive energy, reactive power (optional, with analog output)
3. DEM8900-3 measure Current, active energy, reactive energy, active/reactive power (optional, with analog output)
1.3 EMC and Safety standard
IEC61000-4-2 (GB/T17626.2)
IEC61000-4-8 (GB/T17626.8)
IEC61000-4-4 (GB/T17626.4)
IEC61010-1 (GB/T4793.1).
The RT6303-S Three Phase Energy Meter Test Instrument(Split Type) adopts internationally advanced new-generation digital power source technologt,integrates all the technological advantages of both domestic and foreign watt-hour meter calibration software, and is introduced to global market by Rowwin Test in a powerful and sensational way.The Three phase energy meter test instrument¡¯s power source uses MCU single chip microprocessor as its core technology and adopts various techniques as digital synthesis,digital frequency modulation,digital amplitude modulation,digital phase-shifting,pulse width modulation and so on to bring you such important features as high reliability and good load characteristics.Its more humane and intelligent meter calibration software makes it possible for an ordinary,heavy and boring calibration to be carried out more easily and efficiently.
Technical Parameters:
1. Accuracy class: 0.1/0.05
2. Reference standard energy meter: Three phase wide-measurement range standard energy meter,Accuracy class:0.1/0.05
3. Output voltage: 3* 57.7/100/220/380V Y/¡÷,0~120%Adjustment fineness:0.01% full range,adjustable phase by phase
4. Output current: 3* 0.1~100A(200A also available),0~120%Adjustment fineness:0.0001A(minimum),adjustable phase by phase
5. Phase shift:0~360¡ãAdjustment fineness:0.01¡ã,adjustable phase by phase
6. Frequency:45Hz~65Hz,Adjustment fineness:0.01Hz
7. Output waveform distortion:Both voltage and current<0.5%
8. Output voltage,current and power stability:<0.05%(180s)
9. Output capacity(per phase): Current:650VA(120A); Voltage:300VA(16 meter testing positions). If necessary,the maximum load can be extended to Current:1,200VA and Voltage:800VA
10. Load characteristics:Resistive,inductive and capacitive(less than 4uF)
11. Harmonic wave output:2-21st sub-harmonic wave,content<40%; 3rd,5th and 7th sub-harmonic waves are superposed,content<10% each;Control of wave group(sub-harmonic wave)
12. Energy meter testing positions:16/32(standard);3~40 meter testing positions also available
13. Testing functions:Accuracy testing,Creep testing(no load testing),Starting up testing,Harmonic testing,Repeatability testing, Influencing testing,Dial testing and etc.
14. Power supply: AC 3*220/380V¡À10%,50Hz(customer define);Max. power consumption:2000VA(16 meter test positions).
Dimension:
16 meter testing positions(1 rack): 2200*700*1920mm
32 meter testing positions(2 racks): 2200*700*1920mm each
Cabinet: 600*800*1920mm.
The RT6303B Multi-function Three Phase Energy Meter Test Instrument adopts internationally advanced new-generation digital power source technology, integrates all the technological advantages of both domestic and foreign watt-hour meter calibration software, and is introduced to global market by Rowwin Test in a powerful and sensational way. The Multi-function three phase energy meter test instrument¡¯s power source uses MCU single chip microprocessor as its core technology and adopts various techniques as digital synthesis, digital frequency modulation, digital amplitude modulation, digital phase-shifting, pulse width modulation and so on to bring you such important features as high reliability and good load characteristics. Its more humane and intelligent meter calibration software makes it possible for an ordinary, heavy and boring calibration to be carried out more easily and efficiently.
Technical Parameters:
1. Accuracy class: 0.1/0.05
2. Reference standard energy meter: Three phase wide-measurement range standard energy meter, Accuracy class:0.1/0.05
3. Output voltage: 3* 57.7/100/220/380V Y/¡÷,0~120%Adjustment fineness:0.01% full range, adjustable phase by phase
4. Output current: 3* 0.1~100A(200A also available),0~120%Adjustment fineness:0.0001A(minimum),adjustable phase by phase
5. Phase shift:0~360¡ãAdjustment fineness:0.01¡ã,adjustable phase by phase
6. Frequency:45Hz~65Hz,Adjustment fineness:0.01Hz
7. Output waveform distortion: Both voltage and current<0.5%
8. Output voltage, current and power stability:<0.05%(180s)
9. Output capacity(per phase): Current:650VA(120A); Voltage:300VA(16 meter testing positions)If necessary, the maximum load can be extended to Current:1,500VA and Voltage:800VA
10. Load characteristics: Resistive, inductive and capacitive(less than 4uF)
11. Harmonic wave output:2-21st sub-harmonic wave, content<40%;3rd,5th and 7th sub-harmonic waves are superposed, content<10% each;Control of conduction angle(odd sub-harmonic wave);Control of wave group(sub-harmonic wave)
12. Starting up current: Minimum 0.3 mA, Accuracy:5%,Starting power: Accuracy:5%
13. Tests: Demand test; Frequency impact test; Voltage impact test; Second pulse clock precision test; GPS clock synchronization; Constant calibration; Combined error test; Various register checking;RS485 communication interface test
14. Energy meter testing positions:16/32(standard);3 to 40 meter testing positions also available
15. Testing functions: Accuracy testing, Creep testing(no load testing),Starting up testing, Harmonic testing, Repeatability testing, Influencing testing, Dial testing and etc
16. Power supply: AC 3*220/380V¡À10%,50Hz(customer define);Max. power consumption:2000VA(16 meter test positions).
Dimension:
16 Meter testing positions(1 rack): 2200*700*1920mm
32 Meter testing positions(2racks): 2200*700*1920mm
Cabinet: 600*800*1920mm.
1> Easily mixing with soil for applying.
2> It loosen the soil, and improve the permeability of air and water for the soil.
3> Improving the three phases of the soil. Enhancing the capacity of oxygen supplying to achieve the effect of improving the soil.
4> Fully fermented without odorous. It can be applied both indoors and outdoors.
5> Rich in varieties of organic matter, humus, silica acid, etc.
6> Rich in varieties of microorganisms, it helps to decompose the organic matter and change the nitrogen form which can promote the absorbed nutrient for plants.
7> All purposed type. Can be used as materials for culture soil, soil conditioner or ground mulch to prevent weeds and keep moisture and warm for the soil.
We manufacture, export and supply Rubber Bladders to our customers in the origin of Confucious Culture, Qufu, Shandong, China.
Packing: 46*35*48cm
Standard: size 5 4 3
Origin: China
HS Code: 95066290
Production Capacity: 10000PCS/Day
Butyl bladder and rubber bladder which used in hand stitched and machine stitched soccer balls ,volleyball,etc.
Kato specialized in sports balls include football,basketball,volleyball,rubber balls and so on. It covers 70, 000 square meters with 1, 000 skilled workers. It has three factories, rubber ball factory, PVC toy ball factory and hand sewing ball and synthetic leather factory. The annual capacity is 6 million pieces rubbers balls, 30 million pieces PVC toy balls and 2 million pieces hand sewing balls. All the products enjoy popular sales in Europe and America market.
Standard: size 5 4 3
Weighas per your requirements
Origin: China
HS Code: 95066290
Production Capacity: 10000PCS/Day
Product Description: Butyl inflatable bladder and rubber bladder which used in hand stiched and machine soccer balls,basketball,volleyballs.
We are one specialized in sports balls include PVC balls rubber balls,soccer balls and so on. It covers 70, 000 square meters with 1, 000 skilled workers. It has three factories, rubber ball factory, PVC toy ball factory and hand sewing ball and synthetic leather factory. The annual capacity is 6 million pieces rubbers balls, 30 million pieces PVC toy balls and 2 million pieces hand sewing balls. All the products enjoy popular sales in Europe and America market.
We are offering sports ball bladders to the world.
Following bladders are being produced on regular basis;
1 - Synthetic Rubber Bladders for Machine Stitched Soccer Balls. Available in given weights & sizes. Popular size: 3# 4# 5#
2 - Better Bounce Synthetic Rubber Bladders for Laminated Soccer Balls. Available in given weights & sizes.
3 -Synthetic Rubber Bladders for Volleyballs. Available in given weights & sizes.
4 - Synthetic Rubber Bladders for Basketballs, Available in given weights & sizes.
5 - Synthetic Rubber Carcass for Laminated Basketballs. Available in Size 7 ( Mens ) and Size 6 ( Ladies )
6 - Butyl bladders and PVC Bladders for sports balls, available in full range of regular size.
Kato specialized in sports balls include PVC balls rubber balls and so on. It covers 70, 000 square meters with 1, 000 skilled workers. It has three factories, rubber ball factory, PVC toy ball factory and hand sewing ball and synthetic leather factory. The annual capacity is 6 million pieces rubbers balls, 30 million pieces PVC toy balls and 2 million pieces hand sewing balls. All the products enjoy popular sales in Europe and America market.
1. Bargraph and/or digital displays
2. Single or dual channel
3. Transmitter power supply for 2-wire loop powered input
4. Variety of input types
5. Non-linear tank volume calculation, retransmission output and relay outputs available
6. Horizontal or vertical orientation
7047 Network Multifunction Panel Meter Three Phase Wi Suppliers
Short on time? Let Network Multifunction Panel Meter Three Phase Wi sellers contact you.
