Double sides Short Cycle laminating hot press is mainly used to produce two sides decorated board. suitable for laminating melamine paper,wearable paper and balance paper in both sides of HDF board to produce laminate flooring.
1. Aging treatment: The steel used in our lamination machine was after aging treatment, that's make our material more uniform stress.
2. Frame mechanism: The closed frame is strengthened, which will ensure its working accuracy by appropriate design, reinforced mechanical properties and machining each surface.
3. Oil cylinder adopts the advanced sealing technology, cast-steel cylinder body, chill-iron plunger and good machining accuracy, all of which will extend the working life of cylinder.
4. Adopt PLC control and touch screen. easily set the time and pressure.
Neem Cake / Powder
Neem cake is a versatile and valuable organic input that offers multiple benefits for soil health, plant nutrition, and pest management in agriculture and gardening.
Categories: Agro Products, Organic Manure Tags: micronutrients, Neem Cake, Neem Powder, NPK, organic fertilizer, Organic Pest Control, Soil Amendment, Soil pH Adjustment
Description
Neem cake is a byproduct obtained from the cold-pressing of neem tree fruits and kernels for extracting neem oil. It is a brownish-yellow residue left after the oil extraction process. Neem cake is rich in organic matter and contains several beneficial compounds, making it a valuable organic fertilizer and soil amendment.
Organic Fertilizer: Neem cake is a natural source of nutrients like nitrogen, phosphorus, potassium, and micronutrients. It provides slow-release nutrients to plants, promoting healthy growth and development.
Soil Amendment: Neem cake improves soil structure and fertility by enhancing water retention, aeration, and microbial activity. It helps to replenish organic matter in the soil, making it more fertile and productive.
Pest and Disease Control: Neem cake contains compounds such as azadirachtin, which have natural pesticidal properties. When incorporated into the soil or used as a foliar spray, neem cake helps to repel or suppress pests like nematodes, aphids, whiteflies, and mites, as well as fungal and bacterial pathogens.
Nematode Management: Neem cake is particularly effective against soil-borne nematodes, which can damage plant roots and reduce yields. The compounds in neem cake disrupt the life cycle of nematodes, inhibiting their reproduction and reducing their populations in the soil.
Organic Pest Control: Neem cake can be used as a component of organic pest control formulations and biopesticides. When mixed with water and applied as a spray, it acts as a natural insecticide, repelling or killing pests while minimizing harm to beneficial insects and non-target organisms.
Soil pH Adjustment: Neem cake has a slightly acidic pH, which can help to lower soil pH in alkaline soils. It makes the soil more suitable for acid-loving plants and improves nutrient availability to crops.
Sustainable Agriculture: Neem cake is an eco-friendly alternative to synthetic fertilizers and chemical pesticides. Its use in agriculture promotes sustainable farming practices, reduces chemical inputs, and minimizes environmental pollution.
We deals in Cake and Powder.
Packaging Size: As per user requirement
Packaging type: As per user requirement
We are manufacturers and supply all styles of Abaya, Sheila, Inners Jabalia.
Type: Sleeveless Inner, Full Sleeve Inner
Fit Type: Regular, Custom
Length: Floor Length
MOQ: 500~1000 Inner
Item fabric: Neda, Silk, Chiffon, Dantel
Sheila Included : No
Garment Care: Dry clean or Hand wash only, Low heat, Short cycle, Low steam, Iron carefully, do not Machine wash, do not Tumble dry
Size Chart:
US SIZE UK SIZE AUSTRALIAN SIZE
XS 2 6-8 6
S 4-6 10-12 8-10
M 8-10 14-16 12-14
L 12-14 18-20 16-18
XL 16-18 22 20
2XL 20 24-26 22
3XL 22-24 28 24-26
Payment Accepted:
TT, Bank Transfer, Western Union, PayPal, MoneyGram
Shipping:
Short time Delivery by Dhl, FedEx, UPS, EMS, SEA, AIR
Contact us:
The vacuum laminating press is widely used in the production and manufacture of PCB, FPCB, CCL, etc.  We can supply all kinds of vacuum laminating presses to you.
We mainly produce "WEIDI brand and opened-type and closed-type medium - large size laminating presses of nominal pressures from 6000KN to 30000KN. The products are high in strength,high precision, good thermal stability, stable and durable hydraulic system, etc.  Our products have been exported to Europe and the United States and many countries around the world.
    If you are interested, please do not hesitate to contact us.
2423 Scp Short Cycle Laminating Press Suppliers
Short on time? Let Scp Short Cycle Laminating Press sellers contact you.
Monoblock pumps -
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
salient features
- High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP
- Specially designed for wide voltage operation
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life
- Back pull-out design for easy servicing and repair
- Double shielded ball bearings, so no need of external lubrication
- All Model fitted to Mechanical seal.
specification
- Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 32 Mtr.
- Maximum Flow Rate : 940 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Method of Starting : Permanent Split Capacitor (PSC)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40,
50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm)
characteristics of clear cold water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : EN-8
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Plastic
Monoblock Pumps
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
salient features
High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
- Mechanical seal is provided as per customers requirement
Specification
- Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP)
- Version : Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 65 Mtr.
- Maximum Flow Rate : 1450 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Stuffing Box
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80
100 X 80 and 100 X 100 (All size in mm)
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 mÃ?/sec (max.)
- Ph Value : 6.5 to 8.5
Material of construction - motor
Part Name Material
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminium
Falcon regenerative monoset pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
Salient Features
High operating efficiency resulting in lower power consumption.
- Good suction lift characteristics.
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
- All Model fitted to Mechanical seal.
specification
Power Range : 0.37 Kw - 0.75 Kw (0.5 HP - 1.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
- Speed : 1440 RPM
- Maximum Total Head : 18 Mtr.
- Maximum Flow Rate : 4200 LPH
- Maximum Suction Lift : 8 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Single Phase, Clockwise from driving end
- Nominal Pumpset Size (Suction X Delivery) : 25mm X 25mm
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
material Of construction - Motor
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : SS-410
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : Brass
Cooling Fan : Plastic
Monoblock pumps
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.
Salient Features
High operating efficiency resulting in lower power consumption.
- Good suction lift characteristics.
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
specification
- Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP)
- Version : Three Phase, 380-415V, 50Hz AC Supply
- Speed : 1440 RPM
- Maximum Total Head : 12 Mtr.
- Maximum Flow Rate : 3160 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Stuffing Box
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Three Phase - Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150
(All size in mm)
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminum
CYCLING GLOVES
Cycling gloves are gloves designed for cycling. They may provide warmth, comfort and protection. Gloves are frequently used to keep the hands warm, a function that is particularly necessary when cycling in cold weather. The design of most modern bicycles is such that the rider's hands remain on the handlebars while cycling, a position that leaves them exposed to weather. The hands are also relatively inactive, and do not have a great deal of muscle mass, which also contributes to the possibility of chill. Gloves are therefore vital for insulating the hands from cold, wind, and evaporative cooling while riding a bicycle.
SIZING CHART for Cycling Gloves.
CM'S XS S M L
1) Palm Circumference 17-19 19 - 21 21 - 23 23 - 25
above Thumb
VICKY GROUP OF INDUSTRY - PRICE Detail's.
ITEM CODE DECRIPTION [FOB] - PRICE (USD)
VGI-04-01 Front Amara with palm Grippy Back Neopren and Softshell $7.00
VGI-04-02 Front & Back Amara with Rubber Padding $6.00
VGI-04-03 Half Finger Front Amara with Padding Back Amara & Forway $5.00
VGI-04-04 Half Finger Front Amara with Padding Back Lycra $5.00
VGI-04-05 Front Amara with Padding Back Forway with Amara $8.00
VGI-04-06 Half Finger Front Amara with Padding Back Amara & Forway & knuckle $5.00
VGI-04-07 Half Finger Front Amara with Padding Back Amara & Forway & knuckle $9.00
VGI-04-08 Front Amara Double Layer Back Forway $9.00
VGI-04-09 Front Amara Double Layer Back Amara Forway $9.00
VGI-04-10 Front Amara Double Layer Back Amara Forway $9.00
VGI-04-11 Front Amara Double Layer Back Amara Forway $9.00
Important Note:
All The Items, & Fabrics are Customizable on Demand.
Shipping will be added according to your quantity.
1.Fast speed:
The working period of both ordinary work-piece and highlight work-piece is less than 2 minutes after it enters the main machine, which is 2-4 times of the efficiency of common positive and negative pressure membrane pressure equipment.
2.Good effect:
The product processed by common film has clear groove, no open side, bubbling, no color difference, and high light working surface has strong adhesion, and the effect reaches the international leading level.
3.Low energy consumption:
The total power of the machine is 35KW, which is one half of that of the peer equipment;The main heating starting power is 21KW, and the average power consumption is 12KW/h.
4.High configuration:
The key part of the machine adopts original parts from Germany, Japan and Taiwan, which is high configuration and stable performance.
5.High working efficiency:
The whole machine adopts automatic top block. Compared with other domestic manufacturers, it saves the technological process of making the pad, saves the cost of process raw materials. The technology can be applied to different manufacturers and different positive and negative pressure devices, which saves the cost of replacing equipment. saves the scanning sequence of the pad of the equipment, saves the time of laminating process, greatly improves the working efficiency and reduces the labor cost.
Indonesia Film Faced Plywood Manufacturer and Exporter
2024 Marine Plywood water proof
* Usage : container flooring replacement or other out door purposes
* Face / Back using Red Meranti Veneer
* Mix hardwood Core , high density
* 2 times hot pressed
* WBP Water resistant Glue
* Common Size 28mm x 1220mm x 2440mm = 12 pcs / m3
* MOQ = Loading in 40 ft approx 576 pcs *** Proper use cycling usage time more than 10 times
* Payment term 30% Deposit and 70% balance against copy of B/L , no LC will be accepted to avoid high Banking cost
Film Faced Construction concrete form work / Marine Plywood
* Film Faced = Film 120gr/m2 Black or Brown
* Could be printed buyer's logo on Film
* Mix hardwood Core , 13 plies = high density
* Face / Back Meranti hardwood veneer
* WBP Water resistant Glue
* Common Size 18mm x 1220mm x 2440mm
* 4 sides seal by water proof acrylic paint
* 1 time or 2 times hot pressed by demand
* MOQ = Loading in 40 ft approx 896 pcs
* Proper use cycling usage time more than 10 times
* Payment term 30% Deposit and 70% balance against copy of B/L , no LC will be accepted to avoid high Banking cost
Indonesia Film Faced Plywood Manufacturer and Exporter
2024 Film Faced Construction concrete form work or Marine Plywood water proof
* Film Faced = Film 120gr/m2 Black or Brown
* Mix hardwood Core , high density
* 1 time or 2 times hot pressed
* WBP Water resistant Glue
* Common Size 18mm x 1220mm x 2440mm = 18.66 pcs / m3
* 13 plies or any sizes by demand
* 4 sides sealed by water proof acrylic paint
* MOQ = Loading in 40 ft approx 896 pcs *** Proper use cycling usage time more than 10 times
* Payment term 30% Deposit and 70% balance against copy of B/L , no LC will be accepted to avoid high Banking cost
Indonesia Film Faced Plywood Manufacturer and Exporter
2024 Film Faced Construction concrete form work or Marine Plywood water proof
* Film Faced = Film 120gr/m2 Black or Brown
* Mix hardwood Core , high density
* 1 time or 2 times hot pressed
* WBP Water resistant Glue
* Common Size 18mm x 1220mm x 2440mm = 18.66 pcs / m3
* 13 plies or any sizes by demand
* 4 sides seaedl by water proof acrylic paint
* MOQ = Loading in 40 ft approx 896 pcs *** Proper use cycling usage time more than 10 times
* Payment term 30% Deposit and 70% balance against copy of B/L , no LC will be accepted to avoid high Banking cost
Hi-tech Filters is a proven leader in Filter Cloth for a host of mining, beneficiation & Palettization Process applications, including but not limited to processing of high-value metals such as:
Iron Ore
Zinc & Lead
Chromium & Nickel
Rare earths & Cobalt
Molybdenum
And more
Hi-tech Filters has a host of mining filter press cloth solutions and as the needs of the industry evolve, we will continue to innovate and provide engineered filtration solutions that address changing orebodies, locations, and increasingly demanding mining productivity requirements.
Polypropylene Mono x Multi Filter Cloth
Hi-tech Filters offering Polypropylene Monofilament x Multifilament Calendared Filter Press cloth to achieve over 2000 cycles in Iron Ore (Beneficiation and Palletization filtration)
Solutions for Abrasion and High-Velocity Slurries
Hi-tech Filters offers filter Cloth designed with welded High performance feed necks, which are:
Abrasion-resistant for longer cloth life
Designed to minimize product loss at the neck &
Excellent for extremely high velocity mining slurry.
Reduction in maintenance costs associated with the longer number of cycles between cloth changeouts
Better cake release
Significant increase in filter presses up-time
Lower documented cake moisture for lower hauling costs
Did you know that Hi-tech Filters custom-manufactures top-quality replacement cloth for all makes and models of mining filter press and we will custom-design fabrics to meet the specific production goals for your mine?
We are particularly expert at manufacturing Mining Filter Cloth for 2.0m x 2.0m filter presses and 2.5m x 2.5m filter presses!
