Rotary Lube Blower / Vacuum compressor KAESER EB 420 C û 38 m3/min, 53 kPa There are two identical sets of oil-free, 2 lobe rotary blowers, made by Germand Kaeser Kompressoren GmbH in year 2005 with accessories. Manufactures type is Kaeser ED 420 Compact Omega Pluss 53 and accessories include a control cabinet with two inverters and programmable Kaeser Start Control STC 30 unit, totally 6 preliminary intake air filters and 3 final air intake filters with their steel supports. The rotary blower units have removable sound enclose for noise insulation. Operation of the equipment was stopped in year 2007, total running hours approx 7000 and therefore they are in excellent operational condition. In addition, we can offer you service maintenance by the manufacturer at separate cost. This equipment is suitable for demanding dust collection and pneumatic transportation of various products due to oil free operation. For pneumatic transport application some changes in filters and other parts are needed. The rotary lobe has two blower shafts with high efficiency Omega profile in a blower block. The rotary lobe and the block have a very small distance and they are not touching each other's and therefore there is no need for lubrication oil. The rotors are driven by high efficiency electric motor via belt connection and they both are installed on the same base frame. . The inlet and discharge silencers are designed to be effective at all frequencies and are eminently suited to variable speed . Higher rotational blower speeds produce high volumetric efficiencies, which in turn lower discharge temperatures and power consumption. The Compact Range ensures that all serviceable items are accessed from the front panels of enclosures. The preliminary intake air filters are combination of cyclone and bag filter and it removes most of the dust from inlet air. Fine filter is a combination of cyclone and 138 ceramic fine filters which removes fine dust very effectively. Technical Data Manufacture's type: EB 420 Compact Omega plus 53 Manufactured in year: 2005 Suction capacity with max vacuum:38,0 m3/min Power demand max: 40,3 kW Rotor's rotation speed 4120 rpm Max suction vacuum: 0,53 bar (abs.) Discharge pressure: 1,0 bar (abs.) Max pressure increase: 470 mbar Temperature rise max -t: 82 K Electric motor: 45 kW û 50 Hz / 400/690V û 83/48 A Electric motor nominal speed:2965 rpm Protection class: IP 55 Inverters: Mitsubishi FR-F740-01160-EC Case ventilation fan: 370 W û 50 Hz / 230 / 400V Weight blower with the case:1120 kg Blower case main dimensions:1.8 x 1.7 x 1.8 m (K x L x S) Noise level: 99 dB (A) Noise level with the case: 84 dB (A).
4 MW hfo power plant in running condtion for 1 million dollar.
Power plant of various sizes are available. We cater to Small Scale Power Plants to Large Scale Scale power Plants, and have a vast experience in handling varied fuels. presently, we are executing orders worth 450 MW, with 450 MW already commissioned.
For EPC Projects ranging from 1 to 12 MW, Thermax has a deidicated group which caters to the requirements of the customers. A dedicated Engineering team, which is positioned in Chennai,TN and a project management team ensure that the project is on time, within a fixed budget and quality uncompromised. List of references include:- Hare Krishna metallics Bombay Rayon JK White
This group of deals with plants ranging from 12 to 75 MW. We have delivered over 30 plants in this range and have won recognition throughout India in handling various types of fossil fuels and have also delivered gas based Power Plants. The list of reference include:- Arvind Mills CCPP Grasim& Ultratech Cement Plant CPP Crescent Power IPP Madras Cements, Jayanthipuram & Alathiyur CPP
With the advent of Independent Power Producers and the need for higher efficiencies, Thermax has ventured into the Large power Segment which is anything above 75 MW. We currently have a ceiling of 300 MW. This new EPC route is further encouraged by the Technology tie-up with Babcock & Wilcox USA, for the manufacturing of radiant boilers upto 800 MW in the sub-critical range. We are proud to let the customer know that this new addition has been received with encouragement from the industry fraternity.
Since last two years, Thermax has seen a growing no. of opportunities in the International Market for various fuels, mainly Biomass based. Therefore, the Power Zdivision of thermax has made a foray into the market and hence a total separate dedicated team has been put into place to look after EPC Supply & Supervision. Currently we are executing a project at Philippines for a captive cogeneration unit.
We are undertaking EPC contract for steam turbine power plants and bio mass power plantsbesides our activities. We have offered for new coal fired power plantson turn key basis
Power plants.
Power plants.
The Power plant of 2-6 MW . As per the standards.
Hydro power plant..
Power generation by using biomass gas from rice husk, wood chips, saw dust, coconut husk, bagasse, straw and crop stalks can not only save electricity expenses in the production cost for rice mills and timber processing mills, but can also get benefits from the selling of surplus electric power to the power grid. Our biomass gasification equipment enjoys high conversion efficiency, by taking rice husk as an example, each kwh power generation consumes only 1.6~1.8kg rice husk, and the unit fuel consumption will be lower if wood chips or crop stalks are used. Water used for gas cleaning and cooling can be reused in a circulating way after being treated through water treatment facilities such as sediment ponds. It creates no environmental pollution and little make-up water will be needed. The water pond for each unit of 200kw plant only covers about 50m2 .The engines group and electrical equipments should be put indoors, and the other equipments could be put outdoors. The construction area for each 200kw generator set is approximately 40~50m2. The full set of equipment consumes only 5~8% of the generated power. Therefore, such a project is an ideal one with significant benefits for the area where there is a lot of discarded biomass resources but lack in electric power supply or with higher electricity expense. In general, the investment in the major equipment can be recovered from power generation benefits within the first two years. The equipment can be safely and reliably operated with operational technology. Its easy to be mastered by workers. The maintenance and repair work is similar to ordinary diesel generators.
Power generation by using biomass gas from rice husk, wood chips, saw dust, coconut husk, bagasse, straw and crop stalks can not only save electricity expenses in the production cost for rice mills and timber processing mills, but can also get benefits from the selling of surplus electric power to the power grid. Our biomass gasification equipment enjoys high conversion efficiency, by taking rice husk as an example, each kwh power generation consumes only 1.6~1.8kg rice husk, and the unit fuel consumption will be lower if wood chips or crop stalks are used. Water used for gas cleaning and cooling can be reused in a circulating way after being treated through water treatment facilities such as sediment ponds. It creates no environmental pollution and little make-up water will be needed. The water pond for each unit of 200kw plant only covers about 50m2 .The engines group and electrical equipments should be put indoors, and the other equipments could be put outdoors. The construction area for each 200kw generator set is approximately 40~50m2. The full set of equipment consumes only 5~8% of the generated power. Therefore, such a project is an ideal one with significant benefits for the area where there is a lot of discarded biomass resources but lack in electric power supply or with higher electricity expense. In general, the investment in the major equipment can be recovered from power generation benefits within the first two years. The equipment can be safely and reliably operated with operational technology. Its easy to be mastered by workers. The maintenance and repair work is similar to ordinary diesel generators.
Power generation by using biomass gas from rice husk, wood chips, saw dust, coconut husk, bagasse, straw and crop stalks can not only save electricity expenses in the production cost for rice mills and timber processing mills, but can also get benefits from the selling of surplus electric power to the power grid. Our biomass gasification equipment enjoys high conversion efficiency, by taking rice husk as an example, each kwh power generation consumes only 1.6~1.8kg rice husk, and the unit fuel consumption will be lower if wood chips or crop stalks are used. Water used for gas cleaning and cooling can be reused in a circulating way after being treated through water treatment facilities such as sediment ponds. It creates no environmental pollution and little make-up water will be needed. The water pond for each unit of 200kw plant only covers about 50m2 .The engines group and electrical equipments should be put indoors, and the other equipments could be put outdoors. The construction area for each 200kw generator set is approximately 40~50m2. The full set of equipment consumes only 5~8% of the generated power. Therefore, such a project is an ideal one with significant benefits for the area where there is a lot of discarded biomass resources but lack in electric power supply or with higher electricity expense. In general, the investment in the major equipment can be recovered from power generation benefits within the first two years. The equipment can be safely and reliably operated with operational technology. Its easy to be mastered by workers. The maintenance and repair work is similar to ordinary diesel generators.
China is the most successful country in the world for developing small hydraulic power stations. Our manufacturer is the manufacturing base of the United Nations Small Hydro Power Center (UNISHPC). The first Double- Directional Tubular Bulb Tide Turbine Generating Unit in China was made in our manufacturer. 4 types of hydraulic turbines are available, such as Kaplan, Tubular, Francis and Pelton in more than 200 categories and sizes. Head: 1. 5 - 1000 m Discharge: 0.07 -1 50 cumecs Power: 0. 05 - 100 mw Credential: ISO9001: 2000 Export: More than 30 countries and regions in the world including U. S. A, Canada, Japan, Iran, Turkey, India, etc.
Power plant
Nano silicon nitride power
This product possesses high purity , small and uniform particle diameters , large specific surface area , high surface activity , low loose loading density .
IVC-48VDD is a 1220x1500mm diameter chamber for Aluminum coatings on your product.The Plant is Vertical Double Door for faster loading-unloading and holding large size objects like Reflectors/Wall clock frames etc. This comes with a single Roots (13300LPM) and Rotary (3000LPM) pump and 650 mm dia diffusion pump. The plant is electro-pneumatically operated through a Control Panel and and all parts coming in contact with high vacuum are made of Stainless Steel. 1.5 Tonn
