Diesel exhaust fluid (DEF) is an aqueous urea solution made with 32.5 percent high-purity urea (AUS 32) and 67.5 percent deionized water. DEF is used as a consumable in Selective Catalytic Reduction (SCR) in order to lower NOx concentration in the diesel exhaust emissions from diesel engines. PRODUCT SPECIFICATION SHEET Urea Liquor 50% â?? DEF Grade Typical Chemical Analysis Parameter Specification Urea Concentration, wt.% 50.0 +- 1.0 Free Ammonia (alkalinity), wt.% 0.31 max Biuret, wt.% 0.46 max Parameter Typical Urea Concentration 32.5 +- 0.7 % Density at 20 oC 1087.0 â?? 1093.0 kg/m3 Refractive Index at 20 oC 1.3814 â?? 1.3843 Free Ammonia (alkalinity) 0.2% max Biuret 0.3% max Aldehydes 5 ppm max Insoluble Matter 20 ppm max Phosphates 0.5 ppm max Calcium 0.5 ppm max Iron 0.5 ppm max Copper 0.2 ppm max Zinc 0.2 ppm max Chromium 0.2 ppm max Nickel 0.2 ppm max Aluminum 0.5 ppm max Magnesium 0.5 ppm max Sodium 0.5 ppm max Potassium 0.5 ppm max Water Quality DEMIN â?? ISO 3696 Applicable
Naphtha is a flammable liquid made from distilling petroleum. It looks like gasoline. Naphtha is used to dilute heavy oil to help move it through pipelines, to make high-octane gas, to make lighter fluid, and even to clean metal. It is a liquid petroleum product that boils from about 30�°C (86�°F) to approximately 200�°C (392�°F), although there are different grades of naphtha within this extensive boiling range that have different boiling ranges. The term petroleum solvent is often used synonymously with naphtha. On a chemical basis, naphtha is difficult to define precisely because it can contain varying amounts of its constituents (paraffins, naphthenes, aromatics, and olefins) in different proportions, in addition to the potential isomers of the paraffins that exist in the naphtha boiling range. Naphtha is also represented as having a boiling range and carbon number similar to those of gasoline a precursor to gasoline.
MARINE GAS OIL (MGO) describes marine fuels that consist exclusively of distillates. Distillates are all those components of crude oil that evaporate in fractional distillation and are then condensed from the gas phase into liquid fractions. Marine gasoil usually consists of a blend of various distillates.
Heavy Fuel Oil (HFO) is a residual fuel incurred during the distillation of crude oil. It is primarily used to generate motion and/or heat that have a particularly high viscosity and density. Mainly used in industrial boilers and other direct source heating applications. It is also used as a principal fuel in marine applications and large diesel engines. Generally HFO typically includes bitumen, asphaltenes and long chain polycyclic aromatic hydrocarbons.
Mazut-100 is a fuel oil that is manufactured to GOST specifications, for example GOST 10585-99. Mazut is almost exclusively manufactured in the Russian Federation, Kazakhstan, Azerbaijan, and Turkmenistan. The most important thing when grading this fuel is the sulphur content.
Aviation Kerosene Colonial Grade 54 Jet Fuel JP 54: Jet fuel A-1. Jet fuel designed for use in aircraft powered by gas-turbine engines. It is clear to straw-colored in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A-1 are produced to a standardized international specification.
Petroleum jelly� Vaseline Petroleum jelly is a kind of petroleum grease, which is refined by blending residual oil wax paste with lubricating oil, and is an important lubricant for medicine, daily chemical industry, fine chemical raw materials and precision instruments. The Vaseline products in our country are mainly concentrated on the pharmaceutical Chemicalbook Vaseline, divided into pharmaceutical white Vaseline and pharmaceutical yellow Vaseline two kinds. Pharmaceutical Vaseline is mainly used to prepare ointment, skin protection ointment and cosmetic raw materials, and can also be used as anti-rust lubrication materials for medical instruments and precision instruments.
Low Aromatic White Spirit Mineral Spirit Naptha TURPENTINE OIL� ODORLESS MINERAL OIL SPIRIT PETROLEUM TYPE WHITE SPIRIT These are most common trade names associated with LAWS Low Aromatic White Spirit
Specification item value Place of Origin China Application Candle Making Melting Point 56-58 Forms Solid Oil Content (%) 0.5 Refinement Fully Refined Product name Kunlun Fully Refined/semi-refining Paraffin Wax Color White Color Keywords paraffin wax Shape Block/grainy Package 25kg/bag
Speciality The products offered by Matr Consulting are 3 wide range of Industrial Lubricants, Automotive Lubricants & petroleum. Products with standard specifications are made by reputable companies and delivered to us. These products are prepared and delivered to the customer based on the type of customer request. All financial payments are in cash Petroleum products are materials derived from crude oil (petroleum) as it is processed in oil refineries. Unlike petrochemicals, which are a collection of well-defined usually pure organic compounds, petroleum products are complex mixtures. The majority of petroleum is converted to petroleum products, which includes several classes of fuels Lubricants (produces light machine oils, motor oils, and greases, adding viscosity stabilizers as required), usually shipped in bulk to an offsite packaging plant
Jet Fuel A1 and Jet Fuel A FOB Basis for Rotterdam and Houston but mostly Rotterdam. Requirements from buyer - ICPO - Company Profile - Verfiable TSA
Waste Used Cooking Oil UCO Raw material Vegetable Oil Types Soybean Oil, Canola oil, Vegetable Oils Usage For Biodiesel Free Fatty acid
Moisturizing skin: white Vasoline applied on the skin can provide a good protective barrier for the skin, bring good moisturizing effect to the skin and safe without irritation, very suitable for dry and dehydrated skin. Main Ingredient PETROLATUM Function Emollient Volume 170 kg per drum
Paraffin wax, colorless to white translucent block, tasteless and odorless, with a greasy feeling. Soluble in ether, chloroform, benzene, petroleum ether, volatile oil or various fatty oils, slightly soluble in ethanol. It is chemically stable and does not react with acids, alkalis, oxidants, and reducing agents. It will turn yellow in color under ultraviolet radiation and can be burned and decomposed. 1. This product is a colorless or white translucent block, often showing a crystalline structure; odorless, tasteless; Feels sticky to touch with fingers. 2. This product is soluble in chloroform or ether, almost insoluble in water or ethano
Paraffin waxes in a solid state are usually white, translucent, tasteless and odorless. They are hard, relatively brittle and have a slightly dry feel. In a molten state, paraffin waxes are clear, colorless liquids of low viscosity. When melted, these waxes increase in volume by about 5-8%, resulting in a decrease in density. Paraffin will react at high temperatures with either oxidizing or halogenating agents. This reaction produces either fatty acids and hydroxy acids or halogen substitution products respectively. Although paraffin has many useful characteristics, most commercial applications are based on its resistance to water and vapor and its glossy appearance when polished.
Fuel oil is any of various fractions obtained from the distillation of petroleum (crude oil). Such oils include distillates (the lighter fractions) and residues (the heavier fractions). Fuel oils include heavy fuel oil (bunker fuel), marine fuel oil (MFO), furnace oil (FO), gas oil (gas oil), heating oils (such as home heating oil), diesel fuel and others. Fuel oil has many uses; it heats homes and businesses and fuels trucks, ships, and some cars. It is often used as a backup fuel for peaking power plants in case the supply of natural gas is interrupted or as the main fuel for small electrical generators.
Aqueous Urea Solution or diesel exhaust fluid (DEF) reduces harmful NOx emissions from diesel engines and enable diesel passenger cars to comply with the Euro 6 exhaust standard. AdBlue, DEF & ARLA 32 are the global alternative brands for Aqueous Urea Solution products (AUS). Our supply of Aqueous Urea Solution is mainly directed to our clients in Europe.
Jet Fuel A1 is a premium aviation fuel that is specially designed to meet the rigorous requirements of the aviation industry. It is the most widely used jet fuel globally, trusted by airlines, military aircraft, and private jets for its exceptional quality and performance. Jet Fuel A1 is a type of kerosene-based fuel that adheres to the strict specifications set by international aviation authorities, including the ASTM International (formerly known as the American Society for Testing and Materials) and the International Air Transport Association (IATA). It is specifically formulated to provide optimal performance and safety for turbine engine-powered aircraft.
Cif Contract Procedures a 1 the Buyer Issues the Purchase Order After Receiving the Soft Quotation From the Seller 2 the Seller Issues the Draft Sales Agreement and Contract 3 the Buyer Signs the Sales Agreement and Contract 4 the Seller Issues the Readiness to Inject and Udta With Atv Atsc to Buyer 5the Seller Shall Send the Legalized Contract and the Following Pop Documents to the Buyer as Follows 51 Certificate of Origin 52 Supply Commitment 53 Product Passport 54 Product Availability Statement 55 Export License 5 the Buyer Shall Deposit 1 of the Total Value of the Goods Into Seller Designated Fiduciary Bank Account as the Security Deposit The Buyer the Seller Shall Sign the Refund Agreement The Payment for Goods Will Be Deducted From the Total Product Value at the Discharge Port 6 the Seller Shall Commence Shipment of the Goods and Provide Complete Pop Documents to the Buyer via Email and Hard Copies Will Be Sent From Sellers Bank to Buyers Bank via Courier on the Sellers Expenses Ttm Will Be Held in Buyers Designated Safe Location Upon Buyers Request 81 product Distribution Export License 82 assign Ownership Certificate 83 transneft Contract for Transporting Products to the Loading Port 84port Storage Agreement 85charter Party Agreement for the Transportation of Products to the Port of Discharge Tank Receipt 87 Sgs Quality and Quantity Certificate 88 Landing Order 89 Prevalued Commercial Invoice 810 Noreta 810 Nor Eta Readiness Notice Shipping Date Notice 81 1 Dip Authorization Test Letter 812 The Power of Attorney Given by the Shipping Company to the Shipping Agency Company at the Port of Destination and the Ship Information Documents Necessary for Maritime Reporting Submitted by the Captain of the Ship at the Anchorage of the Port of Destination on Time 813 Ship Questionnaire 88 814power of Attorney Authorizing Sales and Collecting Payment for Goods 9 at the Beginning of Shipment When the Tanker Arrives at the Unloading Port the Buyer Shall Refer the Ship to the Chinese Customs for Approval Upon Successful Customs Approval The Seller Shall Unload the Oil Products Into China Bonded Warehouse the Buyer Shall Conduct Ciq Inspection and the Buyer Shall Pay All the Remaining Payment Through Tt Telegraphic Transfer or Mt103 Within 72120 Hours 10 After the Buyer Pays the Full Payment the Seller Shall Hand Over the Hard Copies of the Original Pop Document Cargo Right Document to the Buyer
Petroleum Jelly Standard: BP2011, CP2005, USP30 PARAMETER STANDARD TEST RESULT Appearance White / Yellow translucent soft unctuous Complies Drop Point C - 42-60 Cone Penetration (0.1mm) - 130-210 Polycyclic aromatic - Hydrocarbons (256-420nm) 1.08 max - 0.091 UV Absorbance (290nm) - 0.5 max - 0.2 Sulphated Ash % - 0.1 max - 0.03% Acidity/ Alkali - Neutral Complies - CONCLUSION PRODUCE ELIGIBILITY.
