1. Strong Point Disc Thickener is maninly used for the low consistency stock thickening. The water log installation height is not needed. It can replace traditional gravity cylinder thickener. In the same floor space, the throughout of the gravity disc thickener is serval times more than that of the gravity cylinder thickener, so a lot of space and power can be saved. 2. Performance and Working Principle The pulp at consistency of 0.8-1.2% enters the vat and attached the disc sector, filtrate is guided by hollow shaft and discharged out at two end. Stock attached on sector is knocked off by high-pressure shower. The thickened stock at consistency of 3-4% flow over the plate of adjusting valve and into discharge chamber where it is out feed. The rotation speed of main shaft can be adjusted for required outlet consistency and capacity. 3. Strong Point Thickening of broke or washing of low consistency pulp systems; Compact design; Variable speed drive, very low power consumption
It produces one-side film-coated paper cup through the procedure of automatic paper feeding, sealing, oil silicon lubrication, bottom punching, heating, knurling, curling and cup discharge. This kind of cup can be for tea, coffee, milk , ice-cream etc. Jbz-b type single pe coated paper cup machine is the automatic environmental machine with multi-running positions. This machine runs a whole procedure of paper-feeding, cup-fan-wall sealing, oiling, bottom-punching, heating, rolling, rimming, rounding and tripping. It is an idea equipment of producing drinking cup, ice-cream cup and other food cone-shaping containers. This type paper cup machine mainly used to making one side pe coated paper cups from 3 oz to 12 oz or above 12oz. Technical date: Suitable size:3ozf+12oz and other special size Raw material:single side(one side) pe(polyethylene) film coated paper Suitable paper weight150--400 gsm (recommend 180--300 gsm) Ration productivity:45--55/min Total power :5kw Net weight:1500kg Gross weight:2000kg Power:220v 380v Overall dimensions :2580l*1200w*1600h(mm) H.S. Code844130900.
Jbzs-b double-coated paper cup forming machine is development equipment on jbz-b single side pe coated paper cup machine. In this type paper cup machine, we add a ultrasonic system to sealing the paper cup body, the ultrasonic system resolve the problem that double sides pe coated paper can not be sealing by heater, the reason is that when a heater is adopted on the outside surface the pe film will be burnt and become yellow or blackish and make the cups shape in ugly. Then in this type machine you can produce both double sides pe coated paper cups and single side pe coated paper cups only exchanging the raw material. Main technical parameters: Suitable size:12ounce---32ounce and other special size Stuff: double pe coated paper or single pe coated paper Ration productivity:45--55/min Total power :5kw Net weight:1500kg Gross weight:2000kg Power:220v 380v Overall dimensions :2700l*1200w*1600h(mm). Dimension: 2580*1200*1600 Weight: 2000kg.
Introduction The Paper Cup Forming Machine is an automatic machine with multi-working station, which has the function of photocell detection, failure alarm, counter and the advantages of humanism design, safer operation and easier maintance.It produces one-side-PE-film-coated paper cups after running a whole procedure of automatic pre-printed fan-shape-paper feeding, cup-side-body sealing(heater), silicone-oil lubricating(for top curling), bottom punching, bottom pre-heating and pre-folding, main heating, bottom knurling, top curling and cup discharging. It is an ideal equipment of making hot drinks (tea, coffee, milk) disposable paper cups and ice-cream paper cups etc. Technical Parameter Cup Size 3.5-12 Oz (Adjustable Mould) Paper 140-320g/¬O Special for one-side laminated Speed 40-50 pcs/min Supply 220V 50Hz 380V 50 Hz Total Power 5 kw Weight 1300 kg Overall Dimension(Lí-Wí-H) 2500í-1200í-1400 mm.
1500 x 200 mm work bed.
It is long life product made from imported brass sheet. Per hundred piece in one small box.
Used paper rulling industries.
Introduction: The tester is applying to test the thickness of flat sheet specimens. It measures up to the standard of paper and cardboard thickness testing method---iso534, iso438, gb/t451.3 and gb/t1938. Technical characters: 1, measure range: 0-18mm 2, accuracy: 0.001mm 3, measuring area: 200mmª 4, pressure: 100 kpa, 5, value error: ª2.5um or ª0.5% 6, dimension: 80+120+120 (mm) 7, weight: 2.5kg Plywood carton
Introduction: The tester is designed according to iso 1974(paper--tearing strength test method), gb455.1, it is mainly used for paper tearing strength test as well as cardboard low-tearing strength test. It can test automatically, lcd displays data. The tester is incorporated with mechanize and electrization. Its micro-control system adapts to the high precision photoelectric axial coder and micro-control digital circuit which make the man-machine conversation come true. The advantages: advanced technology, complete functions, steady capability, simple operation, etc. Technical parameter: 1. Range: 10mn~1000mn 2. Tearing arm: 104fa1 (mm) 3. Beginning angle for tearing: 27.5ffa0.5f 4. Beginning cutting length of specimen: 20fa0.5 (mm) 5. Dimension: 450 (l)f¯310 (w)f¯465 (h) (mm) 6. Weight: about 15kg Plywood carton
Introduction: The meter is widely applied in papermaking, fabric, printing, plastic, ceramic and porcelain enamel, construction material, chemical industry, salt making and other testing department. It is used to test the whiteness, yellowness, color and chromatism of specimen·+as well as transparency, opacity, light scattering coefficient and light absorption coefficient of paper. Plywood carton
The chippers are used for cutting logs, branches, slab, waste veneer, bamboo, cotton stalks, and other non-wood fiber stems into dimensional chips which are the essential material for the production of flakeboard, fiberboard and paper pulp. The chipper is composed of machine base, rotor, upper and lower feed rollers, feeding belt conveyer, hydraulic system, etc.
The knife-roll straw cutters of this series are applicable to the pulp making company; they are used to chip the rice straw, wheat straw, kenaf whole stalk and some other raw materials. The feed part can drive separately, and can positive rotation and reverse in order to avoid chocking. The knife roll adopts rolling bearing, so is convenient in operation and maintenance. And the cutters can be divided into right hand machines and left hand machines according to the client's demand.
This series of machine are suitable for wood chips preparation in the paper pulp, and wood-based panel industries, as well as the chip production bases, by which logs and small wood are cut into high quality chips with even length, smooth chip cut and uniform chip thickness. It is also possible for the chipping of branches and twigs, as well as planks, etc. The chipper consists of frame, knife disc, feed and discharge spout, hood and electrical control system, etc.
The chippers are used for cutting logs, branches, slab, waste veneer, bamboo, cotton stalks, and other non-wood fiber stems into dimensional chips which are the essential material for the production of flakeboard, fiberboard and paper pulp. Many models of this machine, and every one has the different size, weight and dimensions.
The main disposition of sqzk-920 program control paper cutting machine The chrome-plating work table, brings the air cushion Electronic knife lock Ball bearing lead screw, straight line guide rail (match) Infrared electro-optic protective device The belt refuels the installment stroker Trades the knife organization conveniently safely Optics to knife line Has the time delay function and not redundant both hands carries the knife installment Wear-resisting self-locking worm gear case Shear bolt Main electrical machinery and work table electrical machinery's over-load protection Germany hydraulic system and italian oil pump (match) Import electric appliance part Monolithic integrated circuit control system.
The main disposition sqsk-920 numerical control paper cutting machine main disposition The chrome-plating work table, brings the air cushion electronic knife lock Ball bearing lead screw, straight line guide rail (match) Infrared electro-optic protective device Refuels the installment stroker Trades the knife organization conveniently safely Optics to knife line Has the time delay function and not redundant both hands carries the knife installment Wear-resisting self-locking worm gear case Shear bolt Main electrical machinery and work table electrical machinery's over-load protection Germany hydraulic system and italian oil pump (match) Import electric appliance part Monolithic integrated circuit control system
The main disposition of sqzk-920tm program control paper cutting machine The chrome-plating work table, brings the air cushion Electronic knife lock Ball bearing lead screw, straight line guide rail Infrared electro-optic protective device Refuels the installment stroker Trades the knife organization conveniently safely Optics to knife line Has the time delay function and not redundant both hands carries the knife installment Wear-resisting self-locking worm gear case Shear bolt Main electrical machinery and work table electrical machinery's over-load protection Germany hydraulic system and Italian oil pump (match) Import electric appliance part Monolithic integrated circuit control system The Japanese Mitsubishi exchanges the digit servo-control technology Demonstration (label, equal parts, trimming, calculator, machine establishment, preservation) function
This series of machine is used to cut the paper roll into paper sheets. It adopts advanced technology of British and it is driven by AC servo motors, the high cutting speed reaches 300 cuts /min. And it can cut 8 paper rolls at one time. It is also equipped with automatic deflection rectify and antistatic device. The paper feeding and delivering units are automatic with the hydraulic system. The human and machine interface system could make operation become much easy and more convenient. Model: CHM-1400/1700/1900 Main specifications: weight of paper: 60-550gsm Cutting accuracy: 0. 5mm tolerance allowed Max. Cutting speed: 300sheets/min, operation speed depends on cut length, paper quality, paper grade&grammage. Max. Cutting meter speed: 300m/min Cutting length range: 450-1450mm Max. Diameter of reel: 1800mm Sheet stack height: 1300mm Max. Width of cutting paper: 1400mm/1700mm/1900mm Main work sections: Cutting section: 1. Computer operation interface, easy to operate. 2. High precision special alloy steel knife 3. Cutting accuracy is 0. 5mm tolerance Paper feeding section: 1. Double limbs oil pressure shaftless paper rack 2. Auto tension control system 3. Auto paper edge guiding system Electric control section: 1. PLC control system 2. AC servo driving motor 3. High precision encoder&cutting 4. Long endurance Slitting knife: 1. Three sets of slitting knives 2. Used for trimming and middle slitting Paper conveyer system 1. The number of overlapping sheets can be adjusted by this section. 2. The single sheet outlet can be adjusted. CHM-1400:12000kg CHM-1700: 13000kg CHM-11900: 14000kg.
This series of machine is used to cut the paper roll into A4 size paper and wrapping it. Model: CHM-A4-4 Main specifications: Paper Width: Gross width 900mm, net width 840mm Cutting numbers: 4 cutting-A4 210mm (width) Diameter of: Paper roll: Max. 1200mm. Min. 600mm Diameter of: Paper core: 3 or 6 inches or depend on the demand of clients Paper weight: 60-100gsm Sheet length: 297mm Ream amount: 500 sheets. Height: Max.62mm Max. Speed of production: 120m/min(depend on different paper) Max. Numbers of cutting: 404cutting/min Output of the ream: 3.2 times/min Load of cutting: 400gsm Cutting accuracy: about 0. 2mm Cutting requirement: constant speed, no break in reel, cutting all paper one time , eligible paper. Drive: AC frequency conversion and step-less Main power supply: 3*380V AC, 50HZ Voltage: 220V AC/ 24V DC Power: 32KW Compressing air consumption: 300NL/min Air pressure: 6 bar Edge cutting: 2*10mm Optional parts: Auto wrapping system CHM-A4-4: 17000kg.
This machine adopts the technology of europe and it has 10. 4" or 15" display screen designed novelly, the color of screen can be matched. Programming 10, 000 groups to assure the stability of performance. The paper delivering section is driven by AC servo motor so that, the noise can be reduced and the working speed can be increased highly. The paper feeding accuracy of paper location can reach 0. 001mm around. Hydraulic pressure section adopts the rapid pressure increasing system to finish the pressure regulation. The electric control system adopts Panosonic PLC, relilable characteristic, large capacity, it can store data for about 300, 000 hours and can upgrade to perform remote monitoring. The low pressure control section adopts OMRON, LG, TOSHIBA, SCHNEIDER, BDI to make the control stably and efficient. Model: CHM-92CD/115CD/137CD Main specification: Cutting width: 92cm/115cm/137cm Paper feeding depth: 92cm/115cm/137cm Master power: 3kw/4kw/4. 5kw Min. Paper-weight pressure: 150dan Max. Paper-weight pressure: 4000dan/4500dan/5500dan Cutting accurancy: 0. 2mm tolerance. Min. Cutting datumn 2. 5cm/2. 5cm/3. 0cm Cutting speed: 45cuts/min Voltage: 360-400V. Packing dimension: 92CD: 225*140*191cm 115CD: 275*140*200cm 137CD: 295*140*200cm.
