Tungsten Products Suppliers and Manufacturers

Tungsten W catalyst. Based on Assay - with 14-15% W and 3,5-4,5% Ni - in barrels about 18-20 tons - fine granules, about 2cm in length - notification can be done if needed. - Origin EU, loading port EU Port

Tungsten

1. Structure: there is a deposition of tungsten alloy layer on the inner and outer walls of general api standard pipes or special premium thread tubing. 2. Performance indicators Tungsten alloy layer and backing material binding force: according to gb/t5270-2005 testing, the tungsten alloy layer does not crack or peel off. Appearance: uniformly bright, showing silvery white Thickness of tungsten alloy layer: 40-60£gm Hardness of tungsten alloy layer: 560-640hv Special premium thread tubing: hydrostatic pressure: 95mpa, load maintaining for 30 minutes, without leakage. Gas seal: 70mpa, load maintaining for 15 minutes, without leakage. 3. Product classifications and standards Standards of tungsten alloy anti-corrosive tubing Standard shipping packaging as required

Performance Corrosion properties: resistance to corrosion of h2s and co2 with high temperature, salt water, alkali and weak acid corrosion, meeting the corrosion resistance requirements of standard nace 0177. Wear: good wear resistance, superior or equivalent to chrome. Coating adhesion: tested according to gb / t5270-2005, the tungsten alloy layers dont crack or peel off. Appearance: red and black uniform tungsten alloy. Thickness: the thickness of 0.15mm. Performance testing Wear and corrosion resistance test: passed a variety of the wear and corrosion resistance tests carried out by an cnpc tubular goods research institute, an maurer petroleum engineering laboratory, and quality supervision and inspection center of surface covering layer products of machinery industry. Standard shipping packaging, as required

1. Structure: there is a deposition of tungsten alloy layer on the inner and outer walls of general api standard pipes or special premium thread tubing. 2. Performance indicators Tungsten alloy layer and backing material binding force: according to gb/t5270-2005 testing, the tungsten alloy layer does not crack or peel off. Appearance: uniformly bright, showing silvery white Thickness of tungsten alloy layer: 40-60£gm Hardness of tungsten alloy layer: 560-640hv Special premium thread tubing: hydrostatic pressure: 95mpa, load maintaining for 30 minutes, without leakage. Gas seal: 70mpa, load maintaining for 15 minutes, without leakage. 3. Product classifications and standards Standards of tungsten alloy anti-corrosive tubing Standard shipping packaging as required

1. Structure: there is a deposition of tungsten alloy layer on the inner and outer walls of general api standard pipes or special premium thread tubing. 2. Performance indicators Tungsten alloy layer and backing material binding force: according to gb/t5270-2005 testing, the tungsten alloy layer does not crack or peel off. Appearance: uniformly bright, showing silvery white Thickness of tungsten alloy layer: 40-60£gm Hardness of tungsten alloy layer: 560-640hv Special premium thread tubing: hydrostatic pressure: 95mpa, load maintaining for 30 minutes, without leakage. Gas seal: 70mpa, load maintaining for 15 minutes, without leakage. 3. Product classifications and standards Standards of tungsten alloy anti-corrosive tubing Standard shipping packaging as required

1. The structure: Api standard inner tube and the outer surface of the threaded couplings deposited tungsten alloy layer. 2. The performance indicators: The basic properties: size, precision thread sealing meet api standards. Threaded connection: thread has good release buckle sex. Corrosion properties: anti h2s / co2 temperature corrosion resistance to salt water corrosion, alkali, corrosion resistance, weak acid corrosion, nace 0177 to meet the standard requirements for corrosion resistance. Tungsten alloy layer and the substrate binding: according to gb / t5270-2005 testing, coating does not crack, not falling. Appearance: uniformly bright, silvery white Tungsten alloy layer thickness:

Material Tungsten Carbide Width 6-40 mm Density 14.00 to 14.90 gm/cc Thickness 5- 15 mm Dimension Length 20-220 mm

We can supply more than 40000000 mt contacts us for details. thank you.

This tungsten carbide grit also called tungsten grits, carbide grits, it is used to welding or solder onto a steel body, to increase the wear resistance properties. For example, if a steel cutter can cut 24 hours without grits, it will cut 240 hours after with the tungsten carbide grits.

Tungsten carbide gripper jaws tips are tools used to clamp and hang the casing string during the drilling process. They are used to clamp or place between the casing of the drill pipe. They are used to tighten and hang the casing string and oil string in the well to prevent them from falling into the well. Note: Other specification can be made upon customer's requirements.

China Manufacturer with main products:tungsten crucible ,tungsten rod ,tungsten plate/sheet ,tungsten tube ,tungsten heating elements ,tungsten wire ,molybdenum crucible ,molybdenum rod ,molybdenum plate/sheet ,molybdenum tube ,molybdenum electrode ,alloy products. contact Tina

Tungsten carbide tubing can be used to 1. Manufacturing integral carbide cutting tools. 2. Processing general steel, cast iron, stainless steel, heat resistant steel, nickel base and titanium alloy and other materials. 3. Make twist drills, end mills, taps, gun drills and other general tool materials Note: Other specification can be made upon customer's requirements.

Tungsten carbide cobalt sintered and crushed powder is high hardness coating powder.The sintered and crushed morphology generally produces a higher coating density compared to agglomerated and sintered powders.It offers dense, excellent bonding and provides resistant to abrasion erosion and sliding wear . The coating also has high wear resistance but with low coefficient of friction.

This tungsten carbide grit also called tungsten grits, carbide grits, it is used to welding or solder onto a steel body, to increase the wear resistance properties. For example, if a steel cutter can cut 24 hours without grits, it will cut 240 hours after with the tungsten carbide grits.

Tungsten carbide gripper jaws are tools used to clamp and hang the casing string during the drilling process. They are used to clamp or place between the casing of the drill pipe. They are used to tighten and hang the casing string and oil string in the well to prevent them from falling into the well. Note: Other specification can be made upon customer's requirements.

Tungsten carbide roll ringsare rolls made of tungsten carbide and cobalt and other materials using powder metallurgy methods. There are two types of carbide rolls: integral and combined. Superior performance, stable quality, high precision product processing, good wear resistance and high impact resistance Other specification can be made upon customer' s requirements

Wire drawing is a metalworking process used to reduce the cross-section of a wire by pulling the wire through a single, or series of, drawing die(s). There are many applications for wire drawing, including electrical wiring, cables, tension-loaded structural components, springs, paper clips, spokes for wheels, and stringed musical instruments. Our drawing dies are made of high purity tungsten powder the size area are 20% longer than common mould,these factors make sure our wire drawing dies can work longer! we can also produce the following types:Z11,w.v.s13,S12,S10,S01,L,13,11 Note: Other specification can be made upon customer's requirements.