Mr-Jl269 With Led Indication

SUMMARY SNV308.1 series overhead type Fault Indicator system is based on the Sensor that through CT get the (6KV-50KV) lineâ??s current signal, through smart computer chip(IC) by program calculating, Analysis ,judge the short circuit or ground fault. When Sensor detect the fault happen, then the Fault indicator warn the manager through turn red flag, and shine 3 color ultra-led. It is good for power managing user to find the fault happen reason and place, then fast solve the problem and make the power restore. *SNV308.1 Fault Indicator with the aid of the remote control PDA(SNV306.1), User can read, reset the indicatorâ??s setting parameter, and can read the online real time current etc *SNV308.1 Fault Indicator with the aid of the professional control terminal equipment(SNV309.1) and Web server, it can achieve to remote read and manage the Fault indicator state on times. There are two channels for reading and managing the remote fault indicators. One is through GSM mobile phone SMS command control. Second is user computer software control. Power managing user, can get the fault indicator information on times

Pwm charging Direct, boost and float auto-charging modes. Optimized control for intelligent adjustment of control parameters based on actual charging / discharging rates. Led indication of system working status. Temperature compensation, high precision digital temperature transducer. Over-load and short circuit protections. Rated charging current: 20a, 30a, 40a System voltage: 12v, 12/24v, 48a As the same above

3 analog input, can be used for pressure, temperature and oil level measurement, and built a variety of sensor selection, can be custom parameters. More can define auxiliary control relay output. More can be defined isolation switch input. The controller panel button is used to select the control mode, start and stop running the program, data display and running protection parameter modification, led indicator for running state indicating the mode of the controller and the generator, lcd display of the measurement parameters and state. Flexible adaptation of rs485, rs232 or usb communication interface, remote monitoring, through communication with the pc, fully realize the remote communication, telemetry, remote control function, operation parameters and can be read out and set the controller. Unit type:piece package weight:1.500kg (3.31lb.) package size:20cm x 18cm x 17cm (7.87in x 7.09in x 6.69in)

Brief introduction T3x is the 2.4ghz rf wireless synchronization rgb controller which adopts ltech multiple global initiate technology. The control system consists of two parts, the rf remote control and receiver, realize the signal synchronization on unlimited receivers within effective distance. A very good solution for the led project needs sync control wirelessly. User-friendly full-color touch wheel for color selection, unique led state light for sync change indicated, user can simply know the led working state from distance by checking the remote control. Ramming function in the remote control, how easy to program is ! Built-in sync state light, can display the led color in static or changing state synchronously. Any operation on the remote control or any receiver can command all receivers to work wirelessly and synchronously, it's currently only ltech product has this capability. Color changing scene mode and preset storage function. Usb charging port. Carton package

"DTC" Digital Thermostat can be used for heating and cooling application with following technical feature. - High precision with 0.1C / 0.1F for better readability and market requirement. - Wide temperature measuring range from -40C to +150C. - High performance and durable thermoplastic materials housing. - Water and humidity proof on front panel. - High working temperature up to 70C ambient. - Heating / Cooling control possible. - Cooling control with auto or manual defrost cycling. - Internal buzzer or output relay for alarm application. - Configuration of parameter via smart card. General Specifications : Control temperature range : -40C ~ +150C / -40F ~ + 302F Maximum ambient temperature : 70C Input power : 12V~24Vac/dc, 120Vac, 220Vac, 50/60Hz Input Sensor : NTC Output Relay : 8A, 250Vac for heater / compressor Mounting : Panel mount with locking clip. Indication : 3 digits 7 segments Red LED with output function indication. Control Accuracy : +/- 0.5% of FS Indication resolution : 0.1C / 0.1F < 99.9C Alarm : Internal buzzer or output alarm relay Protection : IP65 Security : Password locking

B series temperature and humidity controller with completed FUZZY algorithm control fan or heater to maintain sensible & latent capacity follows temperature curve by automatically. And have an independent humidity input can monitor the environment RH and output control signal. User can adjust temperature value very easily to use dial and a LED indicator to show the relay. -. Electromechanical thermostat, max with 2 control port for fan & heater -. Dial pad setting temperature / humidity threshold -. Sensor length max 10meter (default 3meter) -. 48*48mm panel mounting size, optional Din-rail mounting rack

B series temperature and humidity controller with completed FUZZY algorithm control fan or heater to maintain sensible & latent capacity follows temperature curve by automatically. And have an independent humidity input can monitor the environment RH and output control signal. User can adjust temperature value very easily to use dial and a LED indicator to show the relay. FEATURES Electromechanical thermostat, max with 2 control port for fan & heater Dial pad setting temperature / humidity threshold Sensor length max 10meter (default 3meter) 48*48mm panel mounting size, optional Din-rail mounting rack

Temperature Logging System) is an advanced independent weather monitoring system. It supports Secure Digital card which is used to record the data for 10 years with 2GB SD card and with a LCD for on-line monitoring Change in temperature at every time second is recorded Auto sense with 10 years report Solar powered No external power supply required Supports secure Digital card Auto Data Save Algorithm used Lcd Display for upto date temperature Inbuilt RTC Report with Date/Month/Year/Hr/Min/Sec Suitable for any remote place Temperature is calibrated in celsius Led indication On -off switch for recording.

Specially design for solar-public electricity system, which is in exchange of the solar system, it has power switch where there is a shock by the battery or utility grid, and also the utility grid supply charging module. Its energy saving, and also ensures the power supply. It also has the same function of eprc. Specifications: 12v, 12/24v, 5a, 10a, 15a Use mcu and professional software as the control center to fulfill intelligent soc control, protection to overload, outside and insdie short circuit, reverse connection, thunder and lightining, pv panel reverse current, over charge and discharing etc, usd pwm high efficiency charging way and temperature compensation. Industry level production standard, led indication on system condition. The controller pcb is pained with england apl lacquer, its highly moisture-proof Packing:1pc/color box, 50pcs/carton, carton size:51&31&21cm.Gw:13.5kgs, nw:12.5kgs