Type:strongly acidic
Matrix:polystyrene
Function group:-so3-
Ionic form:na+
Moisture content(%):38~45
Total exchange capacity(mmol/ml):>=2.1
Wet density(g/ml):1.28~1.34
Physical strength(%):(for gel)>=90
5l/pkg
SCG08 is a premium grade Gel type strong acid cation exchange resin, sodium form, with crosslinking8% DVB , which is produced by sulfonated styrene-DVB copolymer The particle size is in standard gaussian distribution with 0.315-1.25mm >95%. SCG08 shows excellent mechanical strength and good ion exchange kinetics, SCG08 in hydrogen form is widely used for water deminerazation to reduce the ions. SCG08 in sodium form is fit for common mixed bed system, which is one of the most cost-efficient system to remove anion & cation from water. equal to purolite C100, Amberlite IR 120
BC120FD Domestic/Industrial/Food grade softening - Potable Use PHYSICAL PROPERTIES Polymer Structure Styrene Crosslinked with DVB Ionic Form, as shipped Sodium Screen Size Distribution 16 to 50 +16 mesh (U.S. Std) < 5% -50 mesh (U.S. Std) < 1% Uniformity Coefficient (max.) 1.6 Water Retention 46 ¡§C 50% Swelling Ca2+ to Na+ or Na+ to H+ approx. 10% Total Capacity 1.9 meq/ml min Shipping Weight(approx.) 0.78-0.84 g/l Temperature Limit 120¡æ Export: 25L PE bags or 1000L big bags,or as client's request.
SCG08 ion exchange resin Gel type strong acid cation exchange resin is used in water demineralization SCG08 is a premium grade Gel type strong acid cation exchange resin, with crosslinking 8% DVB , which is produced by sulfonated styrene-DVB copolymer. The particle size is in standard gaussian distribution with 0.315-1.25mm >95%. SCG08 shows a better oxidative stability and a better regeneration efficiency than SCG07, so SCG08 in hydrogen form is intended for demineralization use in mixed beds visit iex-resin.com for details. Equal to Amberlite IR120h, Purolite C100 Basic feature Application:Mixed bed system for water demineralization Matrix:ST-DVB Type: Gel Functional group:sulphonic acid Ionic form: hydrogen & sodium form Appearance:amber Spherical beads Physical and Chemical Characteristics 1 Total exchange capacity (eq/L) Na+ form â?¥1.9 2 Moisture retention (%) Na+ form 47-56 3 Particle size range (%) 0.315-1.25 mm 95 4 Whole beads count (%) 95 5 Shipping weight (g/ml) Na+ form 0.75-0.85 6 Specific gravity (g/ml) Na+ form 1.15-1.24 7 Uniformity coefficient
C5 Petroleum Resin with Grade SENO-PC5100 is a high class refined C5 Aliphatic Hydrocarbon Resins designed specially as a Binder to meet the technical requirements for hot melt road marking paint in Asian and American Markets.Our C5 petroleum resins offer good dispersion of fillers and pigments and also show excellent flow properties in Hot Melt Road Marking Paint Systems. Our C5 Hydrocarbon Resins are mainly recommended to the Thermoplastic Road Marking Paint and Hot Melt Road Marking Paint industry. Product Parameters Items SENO-PC5100 Appearance (eyeballing) yellowish granule Softening Point (R&B)�ºC 95-105 Color No. (50% Toluene)Ga. 5.0 Max Acid Value(mgKOH/g) 1.5 Max Ash Content(wt%) 0.10 Max Melt Viscosity(200�ºC)Cps 250 Max Application : SENO-PC5100 mainly use for Hot Melt Road Marking Paint,Thermoplastic Road Marking Paint and Pressure Sensitive Adhesives Packaging & Shipping :25kg/bag Store closed containers in a cool, dry, well-ventilated area. Avoid exposure to direct sunlight.
METHOD OF APPICATION: * Mastic compound application consist of two coats of. Primer ,Primer and followed by Mastic compound in recommended thickness, ranging from min. 12mm to 25mm in one or two layers to achieve desired thickness without any pin hole and crack. 1). Surface preparation and application of Primer: Refer application method of Primer. 2). After doing necessary surface preparation and application of primer coating, area to be installed with Mastic compound should be divided in to equal no. bays. To maintain even thickness required, place wooden or aluminum batten. Mastic compound is then broken in small pieces and put it in heating pan. While heating, keep material moving to avoid burning. It is heated until it comes in a uniform consistency and then applied on the surface and works it with wooden float, to achieve uniform thickness and smooth surface free from any pinholes. CHEMICAL RESISTANCE PROPERTIES: * Mastic compound has good resistance to weak, diluted acids, alkalis salts etc. It is not recommended to use against strong acids, oxidizing acid solvents, oil and fats STORAGE & PACKING: * Keep Mastic compound away from direct sunlight, heat solvents etc. Under this condition, its shelf life is unlimited. It is supplied in cake form and approx. wt. is 10 kgs. HEALTH & SAFETY: * Handle melted Mastic compound compound very carefully . Avoid contact with skin. It is advisable to wear protective wears at the time of use of Mastic compound and all other our products. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
SOLID THERMOPLASTIC ACRYLIC RESIN TKA66 Properties Appearance White granular Solid Content 100 Softening Point 141145 Acid Value mgKOHg 405 Tg 50 mpas 25Viscosity 20004300 51 in toluene Solubility It is soluble in esterketone and aromatics It is insoluble in 200 gasoline and alcohol Characters 1Good gloss and hardness 2Good compatibility with CAB 3Good resistance to weather or chemicals 4Good leveling and no after tack 5Good pigment dispersion
PC801 Acid adsorber. PHYSICAL PROPERTIES Polymer Structure Styrene Crosslinked with DVB Ionic Form, as shipped Free Base Screen Size Distribution 16 to 50 +16 mesh (U.S. Std) < 5% -50 mesh (U.S. Std) < 1% Uniformity Coefficient (max.) 1.6 Water Retention 52 ¡§C 60% Swelling Cl- to OH-(max.) 20% Total Capacity 1.3 meq/ml min Shipping Weight(approx.) 0.65-0.72 g/l Temperature Limit 60¡æ Export:25L PE bags or 1000L big bags,or as client's request.
BC121B commercial/industrial grade high capacity softening and demineralization PHYSICAL PROPERTIES Polymer Structure Styrene Crosslinked with DVB Ionic Form, as shipped Sodium Screen Size Distribution 16 to 50 +16 mesh (U.S. Std) < 5% -50 mesh (U.S. Std) < 1% Uniformity Coefficient (max.) 1.6 Water Retention 42 ¡§C 48% Swelling Ca2+ to Na+ or Na+ to H+ approx. 8% Total Capacity 2.0 meq/ml min Shipping Weight(approx.) 0.79-0.85 g/l Temperature Limit 120¡æ Export:25L PE bags or 1000L big bags,or as client's request.
