Moldix® c51 series are pourable two-component silicone condensation rubbers soft to mid-range hardness, self-releasing, room temperature curing (rtv) silicone reproducing the finest detail and durable molds to be made from relatively simple to the most highly detailed. These high performance rubber offering excellent low viscosity and flexibility, so there is no vacuum required! in condensation, moldix® c51 series silicone is tin catalyzed and not sensitive to inhibition, meaning it will cure at room temperature over virtually any surface. They are suitable for casting plaster ornamentation, architectural restoration, soaps & candle, sculpting & statue and many resins such as
5kg/drum, 25kg/drum, 200kg/drum
we are the most effective and efficient supplier of silicon rubber scrap across the world and very reliable to the extent that we make sure our products get to the buyers. silicone rubber scraps and other rubber scrap we do supplies also so if there is need you can contact us for other products.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
Low shrinkage and non-deformation Resistance to acid-alkali and expansion Liquid silicone rubber for gypsum operation instructions Step one: take 100g of part a and add 2g of part b then mix them evenly. Step two: vacuum pumping The time for vacuum-pumping should be 3a5 minutes , otherwise once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step three: pouring the mixture into the frame with original gypsum mold slowly . Shelf life for liquid silicone rubber 10~12months, when stored it in a dry & cool place under the room temperature 25. Packing for liquid silicone rubber 1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing, 200 kg/drum - 1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing, 200 kg/drum
Liquid silicone rubber for gypsum features Liquid silicone rubber is two part silicone with general hardness of 22-50a¡ãafter curing with features ------ High tensile & tear strength High duplication times Low linear shrinkage Resistance to high-temperature Low shrinkage and non-deformation Resistance to acid-alkali and expansion Liquid silicone rubber for gypsum operation instructions Step one: take 100g of part a and add 2g of part b and mix the silicone rubber and curing agent evenly. Step two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: the time for vacuum-pumping should be less than 3¡ª5 minutes , otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step three: pouring the mixture into the frame with original gypsum mold slowly . Shelf life for liquid silicone rubber 10~12months, when stored in a dry & cool place under the room temperature 25. Packing for liquid silicone rubber 1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing, 200 kg/drum 25kg /drum or 200kg /drum
(3) low linear shrinkage (4) resistance to high-temperature (5) low shrinkage and non-deformation (6)resistance to acid-alkali and expansion Liquid silicone rubber for gypsum operation instructions Step one: take 100g of part a and add 2g of part b and mix the silicone rubber and curing agent evenly. Step two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: the time for vacuum-pumping should be less than 3¡a5 minutes , otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step three: pouring the mixture into the frame with original gypsum mold slowly . Shelf life for liquid silicone rubber 10~12months, when stored in a dry & cool place under the room temperature 25. Packing for liquid silicone rubber 1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing, 200 kg/drum 25kg/drum and 200kg/drum
Liquid silicone rubber for gypsum applications 1. Liquid silicone rubber can used for gypsum crafts, gypsum statues , gypsum ceiling rose , gypsum columns , gypsum line , gypsum ceiling board , and all kinds of gypsum decorations . Liquid silicone rubber for gypsum features Liquid silicone rubber is two part silicone with general hardness of 22-50a¡ãafter curing with features ------ (1) high tensile & tear strength (2) high duplication times (3) low linear shrinkage (4) resistance to high-temperature (5) low shrinkage and non-deformation (6)resistance to acid-alkali and expansion Liquid silicone rubber for gypsum operation instructions Step one: take 100g of part a and add 2g of part b and mix the silicone rubber and curing agent evenly. Step two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: the time for vacuum-pumping should be less than 3¡ª5 minutes , otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step three: pouring the mixture into the frame with original gypsum mold slowly . Shelf life for liquid silicone rubber 10~12months, when stored in a dry & cool place under the room temperature 25. Packing for liquid silicone rubber 1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing, 200 kg/drum 25kg/drum
Yijiasan rtv liquid silicone rubber can be used for the molds making of plaster, concrete, pu, gypsum , artificial stone , grc , resin, plastic toys, lost wax, soap, candle, architectual decoration etc. Rtv-2 silicone rubber component a is white flowing liquid and component b is the curing agent. For example, take silicone rubber of 100g and add 2% curing agent for mixing evenly. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame. Characteristics of silicone liquide for mould making 1.) amazing fluidity and easy to operate 2.) delicate design available 3.) non oily 4.) non-toxic and odorless catalyst provided 5.) easy de-molding 6.) excellent tension and tear strength 7.) high performance in duplication 8.) almost nil shrinkage below0.1 9.) excellent resistance to weather, temperature, aging, acid & aging-proofing.
Introduction of rtv 2 molding silicone rubber: 1. Two-part of rtv 2 molding silicone rubber: flowable liquid silicon and catalyst. 2. Rtv 2 molding silicone rubber cures at room temperature within 4-6 hours. Features of rtv 2 molding silicone rubber: 1. Rtv 2 molding siliconerubber has an exceptional fluidity and good operability. 2. Rtv 2 molding silicone rubber hasgood temperature and deformation resistance as well as low shrinkage. 3. Rtv 2 molding siliconerubber has high duplication times. Operation step for rtv 2 molding silicone rubber: 1. Step one to use rtv 2molding silicone rubber: take 100g of part a and add 2g of part b and mix thesilicon rubber and the curing agent evenly. 2. Step two to use rtv 2molding silicone rubber: vacuum pumping 3. Without exception, thistakes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available. 4. Step three to use rtv 2molding silicone rubber: brushing cast & perfusion molding operation. 25kgs/drum vacuum package or 200kgs/drum
High Quality Transparent Molded Silicone Rubber for Kitchen Ware and all kinds of molded silicone products. Description GFD2071P series is fume type general purpose silicone rubber with shore A hardness 30,40,50,60,70,and 80.These products are suitable for compression molding and extruding. Features Excellent process ability Excellent mechanical and electrical properties High tensile strength FDA & FLGB grade Applications Kitchenware, bakeware Skin cover for mobile devices Tubes, sealing Product Data Item Standard (GB/T) 2031P 2041P 2051P 2061P 2071P 2075P 2081P Appearance Transparent Linear shrinkage (%) 130mm 130mm 3.6 3.6 3.5 3.5 3.4 3.3 3.3 Hardness (Shore A) 531.1-2008 31 42 51 62 71 75 81 Tensile strength (MPa) 528-2009 8.2 10.2 10.4 10.1 10.0 9.7 9.0 Elongation (%) 528-2009 759 652 570 462 369 310 205 Tensile set (%) 528-2009 6.0 3.6 4.0 5.6 5.2 3.6 2.8 Tear strength (KN/m) 529-2008 24 28 32 32 31 28 26 Curing agent: C-15, 2%; Curing condition: 170 ºC 10mins, Post cure: 200 ºC 4 hours Storage: Store in a cool and dry place, out of direct sunlight Package: 20Kg/carton or 600Kg/box
