Diaphragm valve, which controls flow by a movement of a diaphragm. Upstream pressure, downstream pressure, or an external source (e.g., pneumatic, hydraulic, etc.) can be used to change the position of the diaphragm.
Staright through kb type rubber lined diaphragm valves/weir type diaphragm valves/ polypropleane/pvc/pp butterfly val/ball val/diaphragm val/ nrv val/ball check val/ nrv rubberlined flap check val/ss 304/ball & butterfly val/knief gate val/y Cartoon box & wooden box package By air & ship
Diaphragm valve The specification is from dn15-dn250
Diaphragm Valves for different applications such as slurries, Viscous and corrosive substances, suspended solids and other hard to handle medium. Diaphragm Valve having rugged design incorporating the best material available is proved by maintenance free operation. A Weir Type Diaphragm valve design is very simply construction. The valve assembly has only three major parts such as Body, Bonnet & Diaphragm. In the diaphragm valve, it's also very easy to replace the rubber diaphragm without dismantling body from the line. Extra heavy duty casting affords high resistance to atmospheric corrosion. diaphragm valve reduces diaphragm travel for extended service and fine control. A wide choice is available in body materials, body rubber lining, types of operation and body end connection to satisfy the need of most industrial application. High quality standards are strictly followed, 100% valve being checked for size, design pressure, operation, Material of Construction, final finish etc.
Suitable for Water , Paper , Automotive , Chemical , Power , Oil & Gas , Pharma industries Body : CI , SGI, Cast Steel , SS , Gun metal Diaphragm : EPDM , PTFE , Viton Lining : Unlined and lined with PTFE , Rubber , PVDF , PFA , Plastic and Glass lining Body type : Weir A type and KB type Size Range : DN 15 DN 350 Temperature Range : -50 degrees to 175 degrees
Cast iron hard rubber lined/butyl lined/epdm lined/ptfe lined diaphragm valve 'a" weir & 'kb' Straight full flow type std design to bs/5156 flange end from size: 25mm to 300 mm available urgently Suitable to copper/aluminum/coal/sugar/steel co for smelter plants application to: water resources, slurry/acid/alkali/high temp line. Table to : bs 10 'd' / asa-150 # class/ din -3220 Wooden box, carton, container etc in lot of 300 maximum. Or less. Weight: 10 tons in 2 to 3 lots Size: 5 ft x 5 ft ach for 20 x 20 container wooden box 10, 000 kg weight
Cast iron hard rubber lined/butyl lined/epdm lined/ptfe lined diaphragm valve 'a" weir & 'kb' Straight full flow type std design to bs/5156 flange end from size: 25mm to 300 mm available urgently Suitable to copper/aluminum/coal/sugar/steel co for smelter plants application to: water resources , slurry/acid/alkali/high temp line. Table to : bs 10 'd' / asa-150 # class/ din -3220 Wooden box, carton, container etc in lot of 300 maximum. Or less. Weight: 10 tons in 2 to 3 lots Size: 5 ft x 5 ft ach for 20 x 20 container wooden box 10, 000 kg weight
Specification: Part No.: FU-200CAM Valve Type: Diaphragm Valve Material: Teflon, Delrin Dimension: 159mmX44.45 Diameter(6.258 X 1.75 Diameter) Weight: 4.8 oz (136g) Viscosity Range: 1-5,000 cPs Max. Fluid Pressure: 60 Psi (4.13 bar)
V62 quick drying dispensing valve is an anaerobic single acting dispensing valve with one-way drive and thimble structure. It is suitable for the production of speakers and loudspeaker boxes, mechanical hole seam sealing, capacitor and module filling, dispensing of circuit board, canned beverage and liquid medicine, drip and coating with anaerobic adhesive, etc. Rapid and accurate action, maintain superior fluid glue breaking function, and simply control the precise flow of liquid. Feature: 1.Common barrier planning is selected to effectively isolate the fluid tank and rubber valve starting parts, so as to finely control the medium and low density fluid flow. 2.The echo time of the barrier valve can reach 15ms, and the glue breaking is clean and agile without dripping and leakage. 3.The fluid tank and diaphragm are made of polymer plastic materials. The polymer fluid tank can be used for various commonly used fluids such as solvent, instant drying glue, anaerobic glue and flux. 4.The black fluid tank can completely shield the light, making the UV dispensing operation safer. 5.The glue quantity is continuously adjustable, easy to clean and low protection. Parameters: Model V62 Flow groove Yellow UHMW Needle adapter Clear PP Cylinder body SUS 303 Stainless Dimension 26.9*79.0mm Weight 154g Diaphragm Yellow UHMW Mounting port M5 Driving pressure 0.4-0.62 MPa Max fluid pressure 0.48 MPa 1.Suitable for: low viscosity liquid,such as anaerobic adhesive,Quick-drying glue, solvent,adhesive,UV glue, epoxy resin,etc. 2.It can be connected with various needle nozzles, and can be connected with feed pump or storage pressure barrel. 3.Small size and light weight.
Cast iron hard rubber lined/butyl lined/epdm lined/ptfe lined diaphragm valve 'a" weir & 'kb' Straight full flow type std design to bs/5156 flange end from size: 25mm to 300 mm available urgently Suitable to copper/aluminum/coal/sugar/steel co for smelter plants application to: water resources, slurry/acid/alkali/high temp line. Table to : bs 10 'd' / asa-150 # class/ din -3220 Wooden box, carton, container etc in lot of 300 maximum. Or less. Weight: 10 tons in 2 to 3 lots Size: 5 ft x 5 ft ach for 20 x 20 container wooden box 10, 000 kg weight
