Super Flux Led Suppliers and Manufacturers

2Lians can supply Plastic scrap product as below: PP Super Sack Reusable Plastic Scrap MATERIAL PP super sack reusable CATEGORY PP TYPE super sack GRADE reusable SPECIFICATION PP super sack reusable 90-95%.New York USA origin. 2-3 loads weekly ORIGIN US LOADING WEIGHT 18 Tons FAS (USD/Ton) 500-800

PP Super Sack White Color Plastic Scrap MATERIAL : PP super sack white color CATEGORY : PP TYPE : super sack GRADE : white color SPECIFICATION : PP super sack mostly white with small % of color bags. post-industrial.2 loads available ORIGIN : Canada LOADING WEIGHT : 18 Tons CNF (USD/Ton) : 500-650$ Hai Phong/Mundra

2Lians Recycling Pte LTD can supply below plastic scrap product: PP Super Sack A Grade Scrap For Recycling MATERIAL: PP super sack A grade CATEGORY: PP TYPE: Super sack GRADE: A grade SPECIFICATION: PP super sack A grade, USA origin, 5 loads per month Origin: US LOADING WEIGHT: 20 Tons FOB (USD/Ton): 450-600

PP Super Sack A Grade Plastic Material For Sales MATERIAL : PP super sack A grade CATEGORY : PP TYPE : super sack GRADE : A grade SPECIFICATION : PP super sack A grade ,5 loads available. Loading 1 load per week ORIGIN : US LOADING WEIGHT : 18 Tons CNF (USD/Ton) : 400-600$ Laem Chabang/Hai Phong 450-650$ Mundra

2Lians Recycling Pte Ltd can supply below scrap product: PP Super Sack A Grade Scrap For Recycling MATERIAL: PP super sack A grade CATEGORY: PP TYPE: Super sack GRADE: A grade SPECIFICATION: PP super sack A grade from USA. PE layer inner not removed. 38,000lbs/cont minimum Origin: US LOADING WEIGHT: 17 Tons FOB (USD/Ton): 370-480

2Lians can supply PP product as below: MATERIAL: PP super sack white color CATEGORY: PP TYPE: Super sack GRADE: White color SPECIFICATION: PP super sack reusable peanut, white color, not 100% reusable, some percentage which are damaged ORIGIN: US LOADING WEIGHT: 17 Tons FOB (USD/Ton): 700-850

Nutmeg Myristica fragrans Fam: Myristicaceae The nutmeg tree is a large evergreen native to the Moluccas (the Spice Islands) and is now cultivated in the West Indies. It produces two spices — mace and nutmeg. Nutmeg is the seed kernel inside the fruit and mace is the lacy covering (aril) on the kernel. The Arabs were the exclusive importers of the spice to Europe up until 1512, when Vasco de Gama reached the Moloccas and claimed the islands for Portugal. To preserve their new monopoly, the Portuguese (and from 1602, the Dutch) restricted the trees to the islands of Banda and Amboina. The Dutch were especially cautious, since the part of the fruit used as a spice is also the seed, so that anyone with the spice could propagate it. To protect against this, the Dutch bathed the seeds in lime, which would prevent them from growing. This plan was thwarted however, by fruit pigeons who carried the fruit to other islands, before it was harvested, scattering the seeds. The Dutch sent out search and destroy crews to control the spread and when there was an abundant harvest, they even burned nutmeg to keep its supply under control. Despite these precautions, the French, led by Pierre Poivre (Peter Piper) smuggled nutmeg seeds and clove seedlings to start a plantation on the island of Mauritius, off the east coast of Africa, near Madagascar. In 1796 the British took over the Moloccas and spread the cultivation to other East Indian islands and then to the Caribbean. Nutmeg was so successful in Grenada it now calls itself the Nutmeg Island, designing its flag in the green, yellow and red colours of nutmeg and including a graphic image of nutmeg in one corner. Spice Description The nutmeg seed is encased in a mottled yellow, edible fruit, the approximate size and shape of a small peach. The fruit splits in half to reveal a net-like, bright red covering over the seed. This is the aril which is collected, dried and sold as mace. Under the aril is a dark shiny nut-like pit, and inside that is the oval shaped seed which is the nutmeg. Nutmegs are usually sold without the mace or hard shell. They are oval, about 25 mm (1 in) in length, lightly wrinkled and dark brown on the outside, lighter brown on the inside. Nutmeg is sold whole or ground, and is labeled as ‘East Indian’ or ‘West Indian’ indicating its source. Whole nutmeg may be coated with lime to protect against insects and fungus, though this practice is giving way to other forms of fumigation. Bouquet:sweet, aromatic and nutty Flavour : Nutty , warm and slightly sweet Hotness Scale: 1

Is Clinical Super Serum Advance+ 30ml

AINiCo is composed primarily of Aluminum Nickel Cobalt and also Copper and Titanium. They are manufactured through either casting or sintering process. Cast AINiCo may be manufactured in complex shapes such as horseshoes not possible with other magnet materials. Sintered AINiCo offer slightly lower magnetic properties but better mechanical characteristics. it can be efficiently magnetized in any direction, and for anisotropic AINiCo magnet, it generally has greater magnetic capacitive in a preferred orientation than isotropic types. AINiCo is hard and brittle, Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances. Advantages of AlNiCo Magnet: 1.Customized designs are available. 2.Max working temperature can be as high as 550�°C. 3.Disadvantage: Br and BH(max)are not as high as rare earth magnet. 4.High energies and relatively low coercivity. 5.High magnetic flux density; low mold charge stable temperature properties; easy to shape. Application of AlNiCo Magnet: *Electronic Ignition Systems *Watt Hour Meters *Medical Instruments *Guitar Pickups *Industrial Motors *Hand Tools *Automatic Control Appliance *Vending Machines

Ferrite Magnet is manufactured from oxide material by powder metallurgical process. Its advantages include: low-cost excellent corrosion resistance, resistance to be demagnetized etc. The normal working temperature of Ferrite Magnet is between-40C and +250'C.It can be magnetized before or after assembling. Generally, Ferrite Magnet can be machined to regular shapes like segments, blocks, rings and discs etc. The normal grades for sintered Ferrite Magnets are Y10,TY25, Y30, Y30BH, Y35, etc. Advantages of Ferrite Magnet: Ferrites have isotropic characteristics, weak magnetic performance, has the same magnetic performance in any direction, multipolar magnetic charge. The main raw material of ferrite is oxides, so it is not corroded by high temperature, high humidity or chemicals (except strong acid and base); with excellent diamagnetic impedance, no flux loss before and after assembly and magnetic charging; working temperature is-40C to + 250C, poor temperature coefficient; Br temperature coefficient is-0.2% , 0.2% under Br, etc. per 1 increase; high hardness, wire cutting and grinding; ferrite is brittle and fragile during production and transportation. magnetic requirements and good for strict working environment requirement. Application of Ferrite Magnet: It is widely used in permanent magnet motor, DC motor, speaker, dry clarinet, magnetic separator machine, Magnetic Knife Holder/Rack, General Holding Devices and adsorption device and so on.

Applications: Use to manufacture gypsum panel or building plasters Use to make gypsum mold or statutes As grout of marble, clay and ceiling tiles As a color additive Act as additive to other products Types: 1. Super Micronized Gypsum Powder 2. Facade Rendering Gypsum Packaging: 25 kg per bag 30 kg per bag 50 kg per bag 1 ton jumbo bag 1.5 tons jumbo bag 2 tons jumbo bag

Boiler tube is divided into general boiler tube and high-pressure boiler tube according to the use temperature. General boiler pipe temperature below 350â??, mainly used to manufacture water wall tube, boiling water tube, superheated steam tube, locomotive boiler superheated steam tube and so on.The heat exchanger tube is one of the components of the heat exchanger, which is used to exchange heat between two media, and has high thermal conductivity and good isothermal property. It is a device that can quickly transfer heat energy from one point to another and has little heat loss, so it is called a heat transfer superconductor with a thermal conductivity of thousands of times that of copper.The common materials of boiler and heat exchange tube are carbon steel, low alloy steel, stainless steel, copper, copper nickel alloy, aluminum alloy, titanium and so on. According to the production method it can be divided into seamless steel pipe and welded steel pipe. 1 ASTM A178 Electric-Resistance-Welded(ERW) Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes 2 ASTM A179 Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes 3 ASTM A192 Seamless Carbon Steel Boiler Tubes for High Pressure 4 ASTM A209 Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes 5 ASTM A210 Seamless Steel Boiler and SuperheaterTubes 6 ASTM A213 Seamless Ferritic and Austenitic Alloy-Steel Boiler Superheater and Heat-Exchanger Tubes 7 ASTM A214 Electric-Resistance-Welded(ERW) Carbon Steel Heat-Exchanger and Condenser Tubes 8 ASTM A249 Welded Austenitic Steel Boiler Super-heater Heat-exchanger and Condenser Tubes 9 ASTM A250 Electric-Resistance-Welded(ERW) Ferritic Alloy-Steel Boiler and Superheater Tubes 10 JIS G3461 Carbon Steel Boiler and Heat Exchanger Tubes 11 JIS G3462 Alloy Steel Boiler and Heat Exchanger Tubes 12 JIS G3463 Stainless Steel Boiler and Heat Exchanger Tubes 13 GB 3087 Seamless Steel Tube for Low and Medium Pressure Boiler 14 GB 5310 Seamless Steel Tube and Pipes for High Pressure Boiler 15 GB 13296 Seamless Stainless Steel Tube for Boiler and Heat Exchanger 16 GB/T 24593 Welded Austenitic Stainless Steel Tube for Boiler and Heat Exchanger

It can be divided into oil well pipe (casing, tubing and drill pipe, etc.), pipeline pipe, boiler pipe, mechanical structure pipe, hydraulic prop pipe, gas bottle pipe, geological pipe, chemical pipe (high pressure fertilizer pipe, petroleum cracking pipe) and ship pipe, etc. 1 ASTM A213 Seamless Ferritic and Austenitic Alloy-Steel Boiler Superheater and Heat-Exchanger Tubes 2 ASTM A249 Welded Austenitic Steel Boiler Super-heater Heat-exchanger and Condenser Tubes 3 ASTM A268 Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service 4 ASTM A269 Seamless and Welded Austenitic Stainless Steel Tubing for General Service 5 ASTM A312 Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes 6 ASTM A358 Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications 7 ASTM A376 Seamless Austenitic Steel Pipe for High Temperature Service 8 ASTM A409 Welded Large Diameter Austenitic Steel Pipe for Corrosive or High Temperature Service 9 ASTM A511 Seamless Staniless Steel Mechanical Tubing 10 ASTM A554 Welded Stainless Steel Mechanical Tubing 11 ASTM A789 Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe for General Service 12 ASTM A790 Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe 13 EN 10216-5 Seamless Steel Tubes for Pressure Purposes-Stainless Steel Tube 14 EN 10217-7 Welded Steel Tubes for Pressure Purposes-Stainless Steel Tube 15 EN 10296-2 Welded Circular Steel tubes for Mechanical and General Engineering Purposes-Stainless Steel Tube 16 EN 10297-2 Seamless Circular Steel Tubes for Mechanical and General Engineering Purposes-Stainless Steel Tubes 17 GB 13296 Seamless Stainless Steel Tube for Boiler and Heat Exchanger 18 GB/T 12770 Welded Stainless Steel Tubes for Mechanical Structure 19 GB/T 12771 Welded Stainless Steel Tubes for Liquid Delivery 20 GB/T 14975 Seamless Stainless Steel Tube for Structural 21 GB/T 14976 Seamless Stainless Steel Tube for Fluid Transport 22 GB/T 18705 Welded Stainless Steel Pipes for Decoration 23 GB/T 21832&3 Austenitic-Ferritic(Duplex) Grade of Stainless Steel Welded and Seamless Tubes 24 GB/T 24593 Welded Austenitic Stainless Steel Tube for Boiler and Heat Exchanger 25 JIS G3446 Stainless Steel Pipe for Machine and Structural Purposes 26 JIS G3459 Stainless Steel Pipes 27 JIS G3463 Stainless Steel for Boiler and Heat Exchanger Tubes 28 JIS G3468 Arc Welded Large Diameter Stainless Steel Pipes

Specification Material 100 Coconut Charcoal Ash Content 225 Moisture Max 7 Calorie Max 7500 kCalkg Burning Time 2 25 hours Smell No Odor No We can produce shisha briquettes according to the customers desired custom specifications Variants 25X25X25 mm 1kg 72pcs 26X26X26 mm 1 kg 64 pcs Min Order 1 X 20 FCL Packing inner plastic inner box master box full color Price 1400ton FOB Jakarta Indonesia Prices are Negotiable

Commodity: Synthetic Cryolite Formula: Na3AlF6 M.W.: 209.95 Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively. Specifications: Appearance white powder F 52% min Al 12% min Na 33% max SiO2 0.36% max Fe2O3 0.08% max CaO 0.5% max P2O5 0.03% max SO4 0.6% max H2O 0.4% max Loss on ignition 2 % max Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels. Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.

Divanti Group is a large processor of used LCD/ LED Monitor panels. Our current monthly production is 35,000 panels. Our LCD/LED Panels have been thoroughly tested to ensure they are able to be reused or remanufactured. After our testing process, we sort and package by size of the screen (15", 17", 19"-21" Regular, 19"-21" Widescreen & 22" and Larger Widescreen). Our packaging department is able to package the panels in bulk boxes or for additional charges we can use custom packaging if required. We typically sell our loads as mixed size panels, but we are also capable of selling custom loads with select sizes and quantities as inventory becomes available. I attached some sample pictures as our LCD panels were tested for your reference. Feel free to contact us for more information regarding our LCD products. Thank you, Scott

Product Brief Introduction: with the largest consumption for construction and building materials. It is mainly used as enamel fluxing agent, glass opalizing agent, acid-proof clay, acid-proof concrete coagulator and wood preservative. It can also be used for insecticide. Product Hazard or Harmful Ingredients:It does not combust or explode but has corrosivity and certain toxicity. Product Physical Properties:The product is white powder crystals and basically neutral. It is difficult to dissolve in water and acid and the density is 2.37g/cm3. Product Chemical Properties:It is stable under normal temperature. It does not combust nor explode when it is heated or contacts with redox materials. Spillage Treatment Method:Simple cleaning and burying Protection Measures for Product Transport & Storage:To prevent from caking and going bad, it should be kept indoor or be covered with protection materials like canvas and free from the blazing sun. Packing :Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg/1200kg. Other Information: Anti-caking agent can be added at the request of customers. Technical Specifications Analysis items Standard Na2SiF6 99% min Loss of weight on drying at 105â?? 0.3% max Free acid (as HCl) 0.1% max Chloride (as Cl) 0.1% max Sulphate (SO4) 0.3% max Iron(Fe) 0.02% max Water-insoluble matter 0.5% max Particle size distribution Passing through 40 mesh sieve 98% min Passing through 60 mesh sieve 90% min Passing through 325 mesh sieve 25% max

Cmmdity: Aluminum Fluride (Aluminium fluride) ther name: Aluminum trifluride Frmula:AlF3 M.W.:83.98 Prperties: The prduct is a white needle crystal r pwder. SP. GR. 2.8823.13g/ cm3, sublimatin temp. 1272Celsiur scale.Its slightly sluble in water and greatly sluble in HF liquid. The chemical prperty fr the high density aluminum fluride is very steady, but that cntains certain crystal water will be decmpsed int Al23 at high temperature with HF being released. Specificatin: grade chemical cmpsitin % Physical character F Al N2 Fe2342- P25 LI Bulk dity g/cm3 AF-0 61.0 31.5 0.30 0.10 0.06 0.10 0.03 0.5 1.5 AF-1 60.0 31.0 0.40 0.30 0.10 0.6 0.04 1.0 1.3 AF-2 58.0 29.0 2.8 0.30 0.12 1.0 0.04 5.5 0.7 AF-3 58.0 29.0 2.8 0.35 0.12 1.0 0.04 5.5 0.7 Uses: Its mainly used as an adjusting agent fr electrlyte in aluminum smelting by fused salt electrlysis, als in ceramic glaze, catalyst and flux f nnferrus metal metallurgy etc. Brief Intrductin f the Prductin Technics In the Hydrgen Fluride Reacting Furnace which is heated utside, Vitril reacts with Flurite t create the Hydrgen Fluride Gas and Anhydrus Fluride Plaster by heating in the prcess f prducing Aluminum Fluride, then the Hydrgen Fluride Gas react with dry Aluminium Hydrxide in Fluidized Bed t create t Aluminum Fluride and water. Packaging packed in wven PP bags with plastic film inside. Each bag has net weight f 25kgs, 50kgs, 500kgs and 1000kgs.