Platform lift The EPL 2000 is designed to definitively resolve the problems of working on tyres of any type of truck or van. The lifting system is entirely pneumatic with a mechanical safety device that prevents accidental total descent (even without air pressure). The lift has a solid structure that ensures the complete stability of the raised vehicle. The climbing ramps can be removed to facilitate balancing operations with wheels mounted, and It has a stopping level to assist operators positioning the vehicle before lifting. The pedal control allows the platform to be stopped at the required height when moving Either up or down. Equipped with 4 arms (optional) for large vehicles. Ax. Capacity / maximum kapasite3000kg] Working pressure / cal¦sma bas¦nc¦10 v 12 bar Net weight w/o ramps / net ag¦rl¦k ( rampalar haric)320kg Ramps / rampalar150 kg Maximum raise / azami yukseklik400mm Width / en1370mm Length / uzunluk2400mm Height / yukseklik 140mm Case size, lift / sand¦k olculeri, lift1450 x 2150 x 350 mm Case size, ramps / sand¦k ˜ltnleri, rampalar500 x 1200 x 500 mm Net weight w/o ramps / net agirlik ( rampalar haric)320kg Ramps / rampalar150 kg Maximum raise / azami yukseklik400mm Width / en1370mm Length / uzunluk2400mm Height / yukseklik 140mm Case size, lift / sand¦k olculeri, lift1450 x 2150 x 350 mm Case size, ramps / sand¦k ˜ltnleri, rampalar500 x 1200 x 500 mm
Automatic tyre changer Automatic tyre changer for 10 û 22 ( inside locking 12 -22, outside locking 10 û 20) wheels complete with automatic lubricator, tyre lever, plastic protection for bead breaker blade 230/400v. 50hz three phase motor, with pneumatic tilting back vertical positions, with pneumaticly operated system which locks the mounting/demounting tool 3mm. Away from the rim edge, with inflating gun. Optional : tubeless tyres inflating device from slides with pedal control and air tank. Working pressure 8 û 12 bar Bead breaker force2500 kg. Working voltage380v three-phases Working voltage (optional)220v single-phase Motor power1, 1 kw- 1, 5 hp / 1500 rpm Weight235kg Width845mm Dept1030mm Height1950mm Plate height780mm Max. Wheel diameter1000mm Wheel width3 û 12 Width845mm Dept1030mm Height1950mm Plate height780mm Max. Wheel diameter1000mm Wheel width3 û 12
Tilt back automatic tire changer 1)Rim size : 10"-24" 2) Max wheel width 420mm 3) Max wheel diameter :1150mm 4) Bead breaker force 2500kgs 5) Pressure : 0.8-1.2Mpa 6) Noise less than 70db 7) Power supply : 220V/380V 8) Packing : 880x970x760mm,225kgs,0.7cbm 880x970x760mm,225kgs,0.7cbm
Specifications Contents:air impact wrench, cylinder, salver, lift bridge, oil extractor, three functional compression tester, tire conveyer handcart & brake tap d intension. 6.Stainless steel preventing from grease and rust. 7.Four wheels marching and self-locking insuring direction precision. 8.Mechanical tire trolley save time and manpow Function: tire changer and maintenance Wheel: four-wheel Size: 650*800*1100mm Weight: 65kg
St-092h tire changing changer machine Features: Bead press system 1.Tremendous power and control 2.Aid mounting and demounting 3.Auto-centering simplifies operation Swing arm column 1.Save space design 2.Locks rim diameter for same sized wheel 3.Steel head with polymer protection Tabletop 1.10 to 24 in clamping range 2.Diameter marks ease clamping 3.Twin cylinder double the clamping force 4.Polymer rim protector Bead breaker system 1.Pneumatic powered 2.Shovel with protector sleeve Motor and drive 1.Powerful motor for best torque and speed 2.Reliable transmission Specification: Power supply: 1 ph /110-220v ac, 3ph/380v ac Motor power: 0.75kw /1.1kw Operating pressure: 0.8~1mpa Bead break force: 2500 kg External clamping: 10~20 in Internal clamping: 12~24 in. Rim width: 3~16 in. Max wheel diameter: 1000 mm. Net weight: 266 kg
Car tire changer made in china garage equipment (st-093) Features: 1. Full automatic tire changer is suitable for handling 10 to 22 inches wheels and capable of handling 20 inches aluminum alloy rims without using special attached device. 2. Also capable of handling extra-wide tires; aid arm installation is optional vertical and horizontal arms with pneumatic dual locking device. 3. Pole is tiltable 4. Self-centering device 5. Slide with step function 6. Tool box under the pole 7. Tubeless in faulting device 8. Complete with air reserve tank 9. Inflating nozzles for tubeless inflating from the slides 10. Frontispiece inflating control pedal 11. Manometer for inflating pressure control equipped with deflating push button Specification: Power supply: 110v/220v 1ph 220v/380v 3ph Motor power: 0.75-1.1kw Bead-remove cylinder: 2500kg Operating pressure: 0.8-1mpa Outside rim clamping: 10"-22" Inside rimclamping: 12"-24" Max wheel dimeter: 1000mm Wheel width: 3"-16"(76-410mm) Noise: 70 db Net weight: 210kg Package size(mm) 1200x1000x1100
Semi-automatic tyre changer with swing arm for rapid head positioning to the rim. Integrated demounting, mounting and inflating the tyres, wide rim diameter capacity. Self-centering function. High alloy mounting head with optimized profiling and good wearing capacity. Double clamping cylinders ensure accurate centering and reliable clamping. With adjustable opening, bead breaker suitable for various size tyres. It could also be applied to motorcycle and atv with optional clamps from our company. One package: 1250x900x920mm. Packed by plywood box
The pedal has step function, which can mount the tire accurately and time saving. The clamp is made of special material, strong and durable. The universal switch is 40a with a pure silver touching point, it can bear great load with a long using life. The mounting head is made of special steel, which is wear-resistance, unbend and unbreakable. The claw, crowbar, demounting head and breaking shoe are optional equipped with the protective cover. This can prevent the rim from being damaged for the operation incorrectly. Gross weight 229kg/ packing dimension 1050x810x990mm
ATC for vertical & horizontal machining centers 50# (40T/60T/80T/100T/120T).
* For double-column machining centers, CNC and NC milling machines * Number of tools expandable as per custom orders.
Motor power 1.1kw/0.75 kw Operation pressure 8-10 bar Max.wheel dia 38úóú¿960 mmú¬ Rim clamping from outside 10úó-18úó Rim clamping from inside 12úó-21úó Bead-breaker force 2500 kg Noise ú+70 dB.
Semi penumetic & machenical tyre changer 1
Tyre load centre Product name: tyre load centre. Model: tye-04 Specification: indoor surface Plug-in type mcb 125amps 120/240 volts 1 phase, 4ways Paper
Tubeless tyre repair kit includes 2 tools & 5 seal strips packed in blister packing. Blister packing
Tire repair tool It used with the tire seal for tire repair.Easy to take and you can repair your tire by yourself.
Tire changer 1) rim clamping from outside: 10 - 21" 2) rim clamping from inside: 13 - 24" 3) maximum wheel diameter: 1, 000mm 4) maximum wheel width / turntable: 360mm 5) max. Wheel width / bead breaker: 330mm 6) bead-remover cylinder (force at 10 bar): 2, 500kg 7) operating pressure: 8 - 10 bar (145psi) 8) power supply: 110v / 1hp, 220v / 1hp or 380v / 3hp 9) motor power: 0.75 - 1.1kw 10) n.W.: 300kg 11) noise:
Tyre Repair Units Tyre repair patches for both bias as well as radial tyres. Cartons
Motor cycle tyre changer Product code nht 810 Motor tyre changer Complete with pneumatic bead breaker blade Manometer for inflation pressure control equipped with deflating push button Water box in the case Rim clamping from outside 6"-21" Maximum wheel diameter 960mm Maximum wheel width/turntable 260mm Maximum wheel width/bead breaker 320mm Bead-remover cylinder(force at 10 bar) 2500kg Operating pressure 8-10bar(145psi) Power supply 110v/60hz 220v/50hz(1ph) 380v/50hz(3ph) Motor power 0.75-1.1kw Net weight 164kg Noise
Tyre changer Product code nht 860-gt Semi-automatic tyre changer Suitable for 12"-23"stiff, wide and low-profile tyres Capable of handling 20" aluminum alloy rims Air reserve tank in the pole Quick inflating Pneumatic bead breaker blade Manometer for inflation pressure control equipped with deflating push button Water box in the case Rim clamping from outside 12"-20" Rim clamping from inside 14"-23" Maximum wheel diameter 1000mm Maximum wheel width/turntable 410mm Maximum wheel width/bead breaker 360mm Bead-remover cylinder(force at 10 bar) 2500kg Operating pressure 8-10bar(145psi) Power supply 110v/60hz 220v/50hz(1ph) 380v/50hz(3ph) Motor power 0.75-1.1kw Net weight 213kg Noise
Repair Kids We manufacture all kinds of reparit kids, such as tire plug, strings, needle
